Free Guide to Cleaning Your Phonak Hearing Aids

Understanding Your Phonak Hearing Aid Components

Phonak hearing aids contain several key parts that work together to help you hear better. The main component is the receiver, which is the speaker that sits in your ear canal or ear mold. This part picks up amplified sound and delivers it directly to your ear. The microphone, typically located on the top or side of the device, captures sounds from your environment. The battery compartment houses the power source that keeps your hearing aid running throughout the day. Understanding each component helps you clean properly without damaging sensitive parts.

Free Website Domain Guide and Options →

Different Phonak models have different designs. Behind-the-ear (BTE) models have a casing that sits behind your ear with tubing that connects to an ear mold or dome. Receiver-in-canal (RIC) models place the speaker directly in the ear canal with a thin wire connecting it to the main processor behind the ear. In-the-ear (ITE) and completely-in-canal (CIC) models fit entirely inside your ear. Each design requires slightly different cleaning approaches based on where earwax and moisture can accumulate.

The battery compartment door is a critical component that needs regular attention. This small door can collect debris and earwax around its edges, which may prevent it from closing properly or cause battery contact issues. Many people don't realize the importance of cleaning around this area, but it directly affects how well your battery makes contact with the hearing aid's electrical components. If your hearing aid keeps shutting off unexpectedly, this area may need cleaning.

Phonak hearing aids also contain a telecoil in many models, which is a small magnetic coil inside the device. While you don't need to clean this directly, knowing it exists helps you understand why you should avoid exposing your hearing aids to extreme magnetic fields. Your hearing aid manual will tell you if your model includes a telecoil and how it functions.

Practical takeaway: Before you start cleaning, read your specific Phonak model's manual or visit Phonak's website to identify your hearing aid type and components. Take a photo of your hearing aid with your phone so you can refer back to the specific design while cleaning.

Daily Cleaning Procedures for Hearing Aid Maintenance

Daily cleaning is the most important step in hearing aid care and takes only a few minutes each evening. Start by using a dry cleaning cloth or tissue to wipe down the exterior surfaces of your hearing aid. Pay special attention to the microphone openings, which can easily become blocked by earwax and dust. Use gentle, circular motions rather than scrubbing aggressively. A soft cloth made of microfiber works well because it won't scratch the device's surface or create lint that could get stuck in tiny openings.

Learn About Chase Card Login and Payment Options →

For the ear mold or dome part of your hearing aid, you can use a slightly dampened cloth if needed, but never expose the electronic processor part to moisture. If you use a BTE model with a separate ear mold, you can disconnect this part and clean it more thoroughly with a damp cloth. Allow it to dry completely before reconnecting it to the hearing aid. Many people keep their cleaning cloth in a small pouch near their nightstand so they remember to clean their hearing aids every evening before bed.

Earwax is the primary challenge with daily hearing aid cleaning. Your ears naturally produce earwax as a protective substance, and when you wear hearing aids, some of this wax accumulates on the device. You can remove visible earwax with a soft brush or cloth, but do not try to dig into small openings. Phonak sells small cleaning brushes with fine bristles designed specifically for this purpose. These brushes have a small wax loop or pick on one end that you can use gently to lift away dried earwax from surfaces, but never force these tools into speaker openings or vents.

Battery compartment cleaning should happen during your daily routine. Open the battery door completely and use a dry cloth to wipe the inside surfaces and the contacts where the battery sits. Battery contacts become corroded if they accumulate moisture or earwax, which prevents the battery from powering your hearing aid correctly. Many hearing aid users carry small alcohol wipes (the kind used for medical purposes) to clean these contacts, but make sure the contacts dry completely before inserting a fresh battery.

Practical takeaway: Create a nightly cleaning routine by setting a phone reminder for the same time each evening. Keep your cleaning supplies (cloth, brush, and any wipes) in one small container near your bed so everything is ready when you need it.

Addressing Earwax Buildup and Moisture Problems

Earwax buildup represents the most common problem Phonak hearing aid users face. When wax accumulates on the speaker opening or receiver, sound quality decreases and you may experience reduced volume or distortion. Some people produce more earwax than others, and if you're someone who tends toward heavy earwax production, you'll need more frequent cleaning. Signs of earwax buildup include sudden volume loss, high-pitched feedback or whistling, or a muffled sound quality that develops gradually over several days.

Learn About Cremation Planning Options →

Phonak offers several products designed to manage earwax. The Phonak Cerustop filter is a replaceable wax guard that protects the receiver opening. This small filter catches earwax before it enters the speaker, and you can replace it with a fresh filter when it becomes clogged. Many Phonak models come with compatible Cerustop filters. Checking this filter should be part of your weekly routine. If it appears discolored or clogged, simply replace it with a new one. This is one of the most effective ways to prevent earwax from damaging your hearing aid's delicate speaker components.

If you don't have a wax guard on your hearing aid, you can request one from your hearing aid provider or purchase compatible filters. The process is straightforward: you gently remove the old filter using the small tool provided, then insert a new filter by sliding it into the same opening. Replacement filters are inexpensive and come in small packs. Many users buy several packs at once to ensure they always have spares available.

Moisture poses a different challenge than earwax. Your ears naturally produce moisture, and this humidity can enter your hearing aid, especially if you live in a damp climate, exercise frequently, or spend time outdoors in humid conditions. Moisture can damage the internal electronic components if it accumulates over time. To manage moisture, open your battery compartment each night to allow air circulation. Some people place their hearing aids in a dry-aid container overnight, which contains desiccant material that absorbs moisture. These containers are inexpensive and highly effective. Simply place your hearing aids in the container before bed, and they'll be drier by morning.

Never use heat sources like hair dryers or ovens to dry your hearing aids, as extreme heat can damage the plastic casing and internal components. Room temperature air circulation is safest. If your hearing aid experiences water exposure from rain or accidental submersion, remove the battery immediately and place the device in a dry-aid container for at least 24 hours before using it again.

Practical takeaway: Purchase a dry-aid container and use it every night, even on days when you didn't notice excessive moisture. This preventive approach takes seconds but can extend your hearing aid's lifespan by years. Check your wax guards weekly and keep replacement filters on hand.

Cleaning Different Phonak Hearing Aid Models

Behind-the-ear (BTE) models like the Phonak Naída or Audéo have a processor unit that sits behind your ear and connected tubing that runs to an ear mold in your ear. For these models, the tubing itself requires regular cleaning because earwax and moisture can enter it. You can gently blow through the tubing from the processor end to dislodge debris, or use a small brush designed for this purpose. Some Phonak users soak the ear mold in warm water with a small amount of mild soap, then dry it thoroughly before reconnecting it. Never soak the processor unit itself, as this can damage the electronics.

How To Deactivate Your Facebook Account →

Receiver-in-canal (RIC) models like the Phonak Audéo X or Paradise have a thin wire with a speaker at the end that sits in your ear canal. These models are more delicate because the speaker is exposed. When cleaning RIC hearing aids, focus on the main processor unit behind your ear while being extremely gentle with the thin wire and speaker tip. Never bend the wire forcefully or try to clean inside the speaker opening. Instead, use a soft cloth to wipe the