The tire pressure warning light—often called the TPMS light—appears as a small icon on your dashboard that looks like an exclamation mark inside a tire. When it illuminates, your vehicle's tire pressure monitoring system has detected that at least one of your tires is underinflated by about 25% or more below the manufacturer's recommended pressure. This isn't a light you can ignore, even if the tire looks fine from the outside.
Learn About Paying Your FGUA Bill Online →
Here's what's happening under the hood: most modern vehicles manufactured after 2007 have sensors mounted inside each tire (or on the valve stem) that continuously monitor air pressure. These sensors transmit data to your car's computer. When pressure drops significantly—usually to around 25 PSI when it should be 32 PSI, for example—the system triggers a warning. Some vehicles have a secondary TPMS light that blinks or shows a different message, indicating a sensor malfunction rather than low pressure.
The reason manufacturers built this into vehicles relates to tire performance and safety. Underinflated tires generate excessive heat due to increased flexing of the sidewalls, wear out faster, reduce fuel efficiency, and impair braking and handling. The National Highway Traffic Safety Administration found that properly inflated tires can improve fuel economy by up to 3%. Conversely, tires that are 25% underinflated can reduce tire lifespan by as much as 45%.
Understanding the difference between types of TPMS warnings matters. A steady, solid light typically means one or more tires are actually low on air. A blinking light that then stays solid suggests a sensor or system problem. Some vehicles also show which specific tire is low—either through a display screen or by displaying the pressure readings for all four tires on your dashboard or infotainment system.
Practical takeaway: Before doing anything else, recognize that the light is alerting you to a real condition that needs attention—either low tire pressure or a sensor issue. Neither problem resolves on its own, and both can worsen over time.
The first step in addressing your TPMS light is knowing what pressure your tires should actually have. This number is vehicle-specific, not tire-specific. Many people mistakenly check the maximum pressure printed on the tire sidewall itself—that's not what you want. The sidewall number (often 44-51 PSI) represents the maximum safe pressure the tire can hold, not the pressure your vehicle needs.
Free Guide to Pay by Plate Illinois Billing →
Your vehicle's manufacturer recommendation is located in several places. The most common location is on a placard affixed to the driver's side door jamb—open your door and look at the edge of the door frame. You'll see a sticker or label that lists tire specifications. This placard shows the recommended pressure for both front and rear tires, which may differ from each other. For example, a sedan might recommend 32 PSI front and 30 PSI rear, while an SUV might show 35 PSI front and 33 PSI rear.
If the door jamb placard is missing or unreadable, check your vehicle's owner's manual—the tire pressure section is usually in the maintenance or specifications chapter. You can also find this information on the vehicle manufacturer's website, by calling a dealership with your vehicle's year and model, or by searching "[your vehicle year/make/model] tire pressure" online. Be specific with your year, as recommendations can change annually.
The reason for manufacturer-specific pressures relates to vehicle weight, suspension design, and performance tuning. A heavy SUV needs higher pressure to support its weight and carry loads safely. A lightweight sedan needs less. Pressures also account for temperature changes—tire pressure increases by about 1 PSI for every 10-degree Fahrenheit increase in temperature, so seasonal changes affect your readings.
Write down or take a photo of the recommended pressures from your door jamb placard and keep this information in your phone or vehicle. This becomes your reference number for the rest of this process and any future tire maintenance.
Practical takeaway: Locate your specific tire pressure recommendation before you check or adjust any tires. This number is on your vehicle, not on the tire itself.
Once you know what your tires should be, you need to measure what they actually are. This requires a tire pressure gauge—a simple, inexpensive tool available at any auto parts store, many gas stations, and online for $5-$25. There are three types: stick gauges (most affordable, $5-$10), dial gauges (more durable, $10-$20), and digital gauges (most accurate, $15-$25). For most owners, any type works fine as long as it reads PSI (pounds per square inch) clearly.
Free Guide to Mold Removal Methods for Walls →
Checking pressure correctly matters for accuracy. Always measure when the tires are cold—this means either first thing in the morning before driving, or at least three hours after driving. Heat from driving causes pressure to rise temporarily, giving you a false high reading. Even a 10-minute drive can increase tire pressure by 3-5 PSI. Cold pressure is your true baseline.
Here's the step-by-step process: Locate your tire valve stem—a small rubber or metal protrusion on the wheel rim where you inflate the tire. Remove the small plastic cap covering the valve stem. Press the gauge firmly onto the valve stem until you hear air stop hissing. The gauge will display your pressure reading. Record the PSI for each tire, including the spare if your vehicle has a tire pressure sensor in it (many newer vehicles do). Repeat for all four wheels, and note any that differ significantly.
Most vehicles have a 2-3 PSI variance between tires due to different wear rates or sensor calibration. However, if one tire reads 10 PSI lower than the others, that's the problem—you've found your culprit. Sometimes multiple tires are low. Occasionally, all four will be slightly low due to seasonal temperature changes or slow, undetected leaks.
Record your findings before moving to the next step. Note which tire(s) are low and by how much. This information helps you decide whether to simply inflate or investigate whether a leak exists.
Practical takeaway: Check pressures when tires are cold and write down each tire's reading. Compare to your manufacturer recommendation to see exactly how much you need to add or remove.
After identifying which tires are low, you'll need to add air. Most people inflate tires at a gas station—nearly all full-service and many self-service stations have air pumps available, often free for customers. Some charge $0.50-$1.00. You can also use a portable air compressor at home ($30-$100 to purchase) or visit a tire shop or dealership, though these options take more time.
How to Delete Your Fitbit Account Guide →
At the gas station air pump, attach the pump nozzle to the valve stem and hold it firmly to avoid air leaking. The pump will display the current pressure and allow you to set your target pressure. Most modern gas station pumps automatically stop when reaching your set pressure. For older pumps without this feature, add air in 2-PSI increments and check with your gauge between additions. Aim for the manufacturer-recommended pressure, not higher. Overinflating wears the tire center faster and can damage the tire.
Once you've adjusted all tires to the correct pressure, you might expect the warning light to disappear immediately. In most cases, it does—but not always. The vehicle's computer system scans tires periodically, typically every few minutes to every few hours depending on the vehicle. It may take a drive of 10-20 miles at highway speeds for the system to recognize that pressures are now correct and reset the light automatically. Some vehicles reset faster; others take longer.
If the light persists after 24 hours and multiple drives, try the manual reset method for your vehicle. Many cars have a reset button located beneath the steering wheel, in the glove compartment, or in the vehicle settings menu (accessed through the dashboard display or infotainment system). Consult your owner's manual for the exact location and procedure, as it varies by manufacturer. The process typically involves turning the ignition to the "On" position without starting the engine, then pressing and holding a reset button for 3
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.