Most people set their thermostat to one temperature and leave it there. That's like leaving your car running all day in an empty parking lot. A programmable Honeywell thermostat lets you change temperatures automatically throughout the day without touching the dial, which is where real savings happen.
Learn About Paying Your FGUA Bill Online →
The math is straightforward: heating and cooling account for about 45% of the average household's energy bill. A programmable thermostat can reduce that by 10-15% annually, according to the U.S. Department of Energy. For a household spending $1,200 yearly on heating and cooling, that's $120 to $180 back in your pocket. The reason is simple—you're not paying to heat or cool an empty house during work hours, and you're not maintaining comfort when no one's home.
Honeywell thermostats come in several models with different programming capabilities. The most common in homes are the T6, T9, and RTH series. These aren't smart thermostats that learn your behavior or connect to your phone (though some newer models do). Instead, they're programmable thermostats where you set a schedule once, and the device follows it every single day until you change it. This guide focuses specifically on how to use these models properly so they actually save you money instead of sitting unused in manual mode.
The barrier isn't cost—these thermostats aren't expensive. The real barrier is that the buttons are confusing, the manual is dense, and most people just give up. That's what this guide addresses. Once you program it, you never touch it again except for seasonal adjustments.
Takeaway: Programming takes 15 minutes one time and then works for you automatically. Without programming, you're paying to heat or cool rooms that are empty most of the day.
Before you program anything, you need to know what you're working with. Honeywell makes dozens of models, but the ones in most homes fall into these categories: programmable (you set a schedule), non-programmable (no scheduling feature), and smart (WiFi-enabled). This guide covers the programmable models because that's what people actually own and where most confusion happens.
Free Guide to Pay by Plate Illinois Billing →
Find your model number on the device itself. It's usually printed on a sticker on the back of the thermostat or on the front near the brand name. Common models include RTH6360, RTH6580, T6, T9, and FocusPRO series. Go to the Honeywell website or search "[your model number] manual" to confirm you have a programmable model. If your thermostat only has a dial or a few buttons and the manual never mentions "programming" or "schedule," it's not programmable—and that's fine, you just won't use this feature.
Most programmable Honeywell thermostats have either 5 to 7 day programming or 5/2 day programming. Five to 7 day means you can set a completely different schedule for each day of the week. Five to 2 day (called 5+2) means you set one schedule for weekdays and a separate one for weekends. Some older models offer just a simple 2-day program (one for weekdays, one for weekends). The difference matters because your schedule might be different on Saturday than Monday.
Look at the thermostat's display and buttons. You'll usually see buttons labeled PROG (program), MODE, FAN, and possibly HOLD or OVERRIDE. The display might show time, current temperature, and scheduled temperature. Write down what you see so you're not hunting for buttons while you're trying to program.
Takeaway: Spend 2 minutes finding your model number and confirming it's programmable. The manual (usually available free online) will be your reference during setup, so bookmark or print it now.
Every programmable thermostat starts with the clock. If the time is wrong, the schedule won't run when you expect it to. On most Honeywell models, you'll enter programming mode by pressing PROG or SCHEDULE, and the display will show the current time. Use the arrow buttons to adjust the hour and minutes. This takes about 60 seconds.
Free Guide to Mold Removal Methods for Walls →
Now here's where people get confused: Honeywell programmable thermostats typically divide each day into four periods. These are Wake, Leave, Return, and Sleep. You don't have to use all four, but understanding what they are prevents mistakes.
The thermostat holds each temperature until the next period begins. So if Wake is at 6 AM at 70 degrees, and Leave is at 8:30 AM at 62 degrees, the house will be comfortable when you wake up, then cool down before you leave.
You do not need to use all four periods. Many people only use three: Wake (comfortable), Leave (economical), and Return (comfortable). Sleep might be the same as Leave if you sleep with the temperature lower anyway. The point is to use fewer periods if your life is simpler, and more periods if your schedule demands it.
Takeaway: Four periods per day is the default structure. Write down what time you wake up, leave home, return home, and sleep. These become your period times. The temperatures you assign are your choice based on comfort and savings preference.
This is where most people fail: they program temperatures that sound good in theory but make them uncomfortable in practice. Then they override the schedule manually and stop using it.
How to Delete Your Fitbit Account Guide →
Start with what you actually live with right now. Look at your thermostat this week and note what temperature you keep it at when you're home and awake. Write it down. That's your Wake and Return temperature. For most people, that's somewhere between 68 and 72 degrees in winter, or 72 to 76 degrees in summer.
For Leave periods, aim for 4 to 6 degrees different from your Wake temperature. If you're comfortable at 70 degrees while home, try 65 degrees while you're gone in winter (or 78 degrees in summer if you're cooling). This is where the savings comes from—you're not conditioning an empty house. But don't go too aggressive. Setting it to 55 degrees in winter or 85 degrees in summer might seem smart, but it makes the system work harder when you come home, and you might override it because you're cold or hot.
For Sleep, many people drop it another 2 to 3 degrees because sleeping is more comfortable when cooler. But this is optional. If you sleep with your bedroom door closed or have a ceiling fan, you might not want to change it at all.
Here's the practical approach: Program conservatively on your first attempt. If the schedule is working but you're not comfortable, adjust by 1 or 2 degrees the next week. You can always get more aggressive with savings once you know the schedule is running correctly and your system isn't struggling.
Write your proposed schedule down on paper first:
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.