Horry Electric Cooperative (HEC) serves roughly 170,000 members across South Carolina's coastal region, and like most utilities, their billing system combines several distinct charges. When you open your HEC bill, you'll notice it breaks down into specific line items rather than one flat rate. Understanding what each charge represents makes it far easier to track your usage patterns and spot any unusual activity on your account.
Learn About Paying Your FGUA Bill Online →
The base of your bill typically includes a customer charge—a fixed monthly fee that covers the cost of meter reading, billing, customer service infrastructure, and maintaining the lines that connect your home to the grid. For most residential customers, this base charge runs between $15 and $20 per month, regardless of how much electricity you use. This charge exists because the utility maintains equipment and infrastructure specifically for your home even during months when you use very little power.
Beyond the base charge, your bill reflects your actual energy consumption measured in kilowatt-hours (kWh). One kilowatt-hour equals the energy used by a 1,000-watt device running for one hour. A typical microwave uses about 1 kWh to run for roughly 15 minutes on high power; a central air conditioner might consume 15-20 kWh on a hot summer day when running continuously. Horry Electric charges per kWh of electricity you consume, and this rate varies by season and time period—more on that in later sections.
Many HEC members also see charges labeled as taxes, surcharges, or regulatory fees. These aren't Horry Electric's profit margins—they're government taxes (state and local sales tax on electricity) or fees mandated by the South Carolina Public Service Commission to fund specific programs like energy efficiency initiatives or rural electrification support. These typically add 3-8% to your base charges.
Practical takeaway: Before diving into your bill, locate and note three numbers: the customer charge, the per-kWh rate, and the total kWh consumed during the billing period. These three elements make up roughly 85-90% of what you owe and are the easiest to track month-to-month.
Horry Electric operates under different rate structures depending on your account type, and most residential customers fall into one of two categories: standard residential service or residential time-of-use service. Your membership agreement and your physical location (whether you're in a rural area or closer to a service hub) may place you in one category or the other, though many members have a choice.
Free Guide to Pay by Plate Illinois Billing →
Standard residential service charges one consistent per-kWh rate throughout the month, making your bill predictable and straightforward to calculate. If HEC's standard rate is 12 cents per kWh and you use 800 kWh in a month, your energy charge is simply 800 × $0.12 = $96.00. Add the base customer charge (say $18) and any applicable taxes or fees, and you have your total bill. This structure rewards steady, moderate usage but doesn't incentivize shifting your consumption to cheaper times.
Time-of-use (TOU) rates, by contrast, charge different rates depending on when you use electricity. A typical residential TOU plan might charge 10 cents per kWh during off-peak hours (usually late evening through early morning) and 16 cents per kWh during peak hours (usually late afternoon through early evening, especially on weekdays). Some plans add a middle tier for shoulder hours. The benefit is clear: if you can run your dryer, dishwasher, or charge devices during off-peak hours, your bill shrinks. The trade-off is complexity—you need to shift habits, and higher usage during peak times can quickly inflate your bill.
As of 2024, Horry Electric's standard residential rate hovers around 11-13 cents per kWh for energy, depending on seasonal adjustments and recent fuel cost changes. TOU rates typically range from 9-10 cents (off-peak) to 14-18 cents (peak), though exact figures shift with regulatory filings. HEC adjusts rates periodically—roughly every 2-3 years on average—based on fuel costs, infrastructure investments, and regulatory decisions.
Agricultural accounts and small commercial accounts operate under different rate schedules entirely, with higher base charges but sometimes lower per-kWh rates due to higher consumption volumes. If you run a farm, irrigation system, or small business, your bill structure looks quite different from a standard residential account.
Practical takeaway: Contact Horry Electric's member services (843-358-3000) or visit their website to confirm which rate class applies to your account and whether switching to a different rate structure would lower your annual costs. Run the calculation for both structures using your last 12 months of usage to compare.
Horry Electric's service territory experiences two distinct seasons: a hot, humid summer when air conditioning drives peak demand, and milder winters with occasional cold snaps. This seasonal pattern directly shapes how the utility prices electricity, and understanding the seasonal split is key to anticipating bill spikes.
Free Guide to Mold Removal Methods for Walls →
Summer rates (typically June through September) run higher than winter rates because air conditioning loads surge during afternoon and early evening hours, pushing the electrical grid to its limits. When demand peaks, the utility must activate additional power generation capacity (sometimes expensive natural gas plants), upgrade transmission infrastructure to handle the load, and maintain more standby reserve. These costs get passed to members through higher per-kWh rates. Summer rates at HEC typically run 15-20% higher than winter rates.
Winter rates (typically October through May) are lower because heating loads are spread throughout the day and nighttime temperatures drop, reducing cooling needs. Even homes with electric heat consume less peak-period electricity than homes running central air during summer afternoons. A December or January bill in Horry County might show 30-40% lower energy charges than an August bill using identical kWh amounts—purely due to the seasonal rate difference.
For customers on time-of-use rates, peak hours are most tightly defined during summer. Peak hours might run from 2 PM to 8 PM on weekdays during summer but might narrow to just 4 PM to 7 PM during spring and fall, or even disappear during winter when demand is lowest. Some utilities (though not all) offer reduced or waived peak rates during winter months since grid stress simply isn't a concern.
Beyond seasonal rates, some commercial and large residential accounts face demand charges—fees based on the highest power draw at any single moment during the billing period, measured in kilowatts (kW) rather than kilowatt-hours. A home that runs both the air conditioner and electric oven simultaneously might hit a 6 kW peak draw for a few minutes; if demand charges apply, that brief spike affects the entire month's bill. Standard residential accounts rarely face demand charges, but accounts with large loads sometimes do.
Horry Electric's rate book (published annually and available on their website) specifies exact seasonal dates and rate adjustments. These dates have remained fairly consistent but can shift by a week or two year to year based on grid planning and regulatory decisions.
Practical takeaway: Plan major electrical upgrades, appliance purchases, or usage-heavy projects for winter months when rates are lower. If your summer bills consistently spike, consider investing in insulation, programmable thermostats, or window treatments—the difference between June and August bills can justify a modest efficiency upgrade.
A typical Horry Electric residential bill spans one to two pages and follows a standard format that, once you understand it, becomes predictable. The top section shows your account number, member name, service address, and billing period (usually a 30-31 day cycle). Below that sits the usage summary showing your current kWh consumption and comparison to the same month last year, which helps spot unusual spikes at a glance.
How to Delete Your Fitbit Account Guide →
The detailed charges section breaks into categories. First comes "Energy Charges," which multiplies your kWh usage by the applicable rate. Example: 850 kWh × $0.1285 per kWh = $109.225, rounded to $109.23. If you're on a time-of-use rate, this section splits into two or three line items: peak usage at one rate, off-peak usage at another, and possibly shoulder usage in between.
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.