Before you press anything, it helps to know what each button on your iPad actually controls. Apple keeps the physical controls minimal β intentionally β which means fewer things can go wrong when you're starting out. The main buttons you'll encounter are the power button, the volume controls, and potentially a home button depending on which iPad model you own.
Learn About Paying Your FGUA Bill Online β
The power button location varies by iPad generation. On newer iPad models (iPad Pro 2018 and later, iPad Air 4 and later, iPad 10th generation and newer), the power button sits on the top edge or the right side of the device. On older iPad models, you'll find it on the top right corner. This button does two things: it turns the iPad on when held for several seconds, and it powers it down when held again. Don't worry about holding it too long β worst case, you'll see the power-off slider appear on screen, and you can release at that point.
The volume buttons sit adjacent to the power button, typically on the same edge. These are two separate buttons β one raises volume, one lowers it. During startup, you won't need these buttons. But it's worth knowing they're there because if you accidentally press one while powering on, nothing harmful happens. The buttons are slightly recessed so they won't accidentally activate in a bag or backpack.
Some iPad models include a home button (the circular button on the bottom center of older iPads). Newer models don't have one β instead, they use gestures on the screen to navigate. If your iPad has a home button, don't press it during the initial power-on sequence. You won't need it until after your iPad has fully started up.
Practical takeaway: Locate your power button right now by looking at the edges of your device. If you can't immediately spot it, check your iPad's documentation or the model number on the back β different generations have different button placements, and knowing this prevents confusion when you're ready to press it.
The moments before you turn on your iPad for the first time matter. Your device likely spent time in storage or shipping, and a few quick checks ensure everything goes smoothly. This isn't complicated, but skipping these steps can create unnecessary confusion when you're trying to complete the setup process.
Free Guide to Pay by Plate Illinois Billing β
First, check the physical condition of your iPad. Look for any visible damage to the screen, corners, or edges. If you've just unboxed it, there's usually a protective plastic film on the screen β this is normal and comes off easily later. Don't worry about removing it now; you can do that whenever you're ready. Look at the USB-C port (or Lightning port on older models) at the bottom to make sure nothing is stuck inside it. A small amount of dust is normal, but debris can interfere with charging.
Next, find a clear, flat surface to work on. You don't need a desk β a table, bed, or even the floor works fine. You're about to hold the iPad and look at the screen for setup, so pick somewhere comfortable where you won't be jostled around. Make sure you have decent lighting so you can read what appears on screen during setup. Harsh sunlight on the screen can make text hard to read, so an indoor space with regular lighting is ideal.
Charge your iPad before powering it on, if possible. Most new iPads ship with some battery charge, but not necessarily enough to complete the entire setup process. You have two options: you can plug it in now and wait 15-20 minutes for some charge to accumulate before powering it on, or you can turn it on right away and plug it in during setup. Either approach works. If you plug it in first, that's actually the safer choice because setup involves downloading information from Apple and possibly your Wi-Fi network, which drains battery faster than normal use.
Gather information you might need during setup. You'll want your Wi-Fi password nearby (or you can type it in when prompted). If you're planning to sign in with an Apple ID, have that email address and password handy, though you can also create one during setup or skip this step entirely for now.
Practical takeaway: Spend five minutes doing these prep steps: clear your workspace, charge your device for a few minutes, and write down your Wi-Fi password. This small investment eliminates the most common frustrations people encounter during first startup.
The actual power-on moment is straightforward, but knowing what to expect reduces anxiety. Your iPad won't spring to life instantly like a phone might β there's a brief moment of darkness, then the Apple logo appears, and then the welcome screen emerges. The entire process typically takes 30-60 seconds from your first button press.
Free Guide to Mold Removal Methods for Walls β
Locate your power button using what you learned in the first section. Press and hold it. You're looking for a response, which will come as a vibration you can feel (a gentle buzz) and visually as the screen lighting up. You'll see the Apple logo appear in the center of a dark screen. This is the boot screen, and it means your iPad is starting up correctly. Keep holding the power button until you see this logo. Once the logo appears, you can release the button β the iPad will continue starting up on its own.
Now you wait. This is normal. The iPad is loading its operating system, checking its hardware, and preparing to show you the welcome screen. This can take anywhere from 30 seconds to two minutes depending on how old your model is and various other factors. You'll see the Apple logo stay on screen for a while, potentially go black briefly, and then transition to the welcome screen. Don't press anything during this time β the device is working.
The first screen you see after startup will be a language selection screen or, in some cases, a "Hello" screen with setup options. This is your signal that the iPad has successfully powered on. You haven't finished setup yet, but you've completed the hardest part (which, if we're honest, was mostly just waiting).
If your screen remains black for more than three minutes, or if the Apple logo never appears, something unusual has happened. In that case, plug the device into power and wait another minute. Sometimes an extremely low battery can prevent a device from starting. If you've waited and charged it and nothing appears on screen, note the model of your iPad and consult Apple's troubleshooting resources.
Practical takeaway: Press and hold the power button until you see the Apple logo. Then let go and wait patiently β 30 to 90 seconds of nothing happening is completely normal and means everything is working.
After your iPad powers on, you'll encounter several setup screens in sequence. These screens are designed to walk you through initial configuration step by step. Understanding what each screen is asking and why helps you move through setup confidently without feeling like you're missing something.
How to Delete Your Fitbit Account Guide β
The very first setup screen typically asks you to select a language and region. Swipe through the language options and tap the one that matches your preference. This determines what language the iPad will use for menus, buttons, and system messages going forward. You can change this later if you want, so don't stress over the decision. After selecting your language, the iPad asks about region and location settings. Choose the country or region where you live. This affects things like which keyboard layout the iPad suggests and how dates and times are formatted.
Next comes Wi-Fi selection. You'll see a list of available Wi-Fi networks near your device. Tap the name of your home network, and the iPad will ask for your Wi-Fi password. Type it carefully β passwords are case-sensitive and include uppercase letters, lowercase letters, numbers, and sometimes special characters. If you make a mistake, the iPad will tell you the password is wrong and let you try again. Once you enter the correct password, the iPad connects to the internet, which is necessary for the rest of setup.
After connecting to Wi-Fi, the iPad asks about data and privacy. It will show options about whether to send diagnostic information to Apple. These choices are optional β you can enable or disable any of these options, and it won't affect your iPad's functionality. The iPad simply informs Apple whether it should receive crash reports and usage information from your device. There's no wrong choice here, just your preference.
You'll then see a screen asking whether to restore from a backup or set up as new. If this is truly your first iPad ever, select "Set Up
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.