Breast augmentation technology has shifted dramatically since the early 2000s. The changes weren't just cosmetic—they fundamentally altered how implants perform, how long they last, and what complications might arise. Understanding this evolution helps explain why someone considering the procedure today faces very different options than a patient might have encountered two decades ago.
Learn About Paying Your FGUA Bill Online →
In the early 2000s, saline implants dominated the market. These were silicone shells filled with sterile salt water. They were cheaper to produce, and if they ruptured, the body would simply absorb the saline with no known harm. The downside: they could feel less natural, and rippling—visible wrinkles or folds in the implant—was common, especially in thinner patients. Silicone gel implants existed but faced restrictions in the United States from 1992 to 2006 due to safety concerns that were later found to be largely unfounded.
When the FDA lifted restrictions on silicone gel implants in 2006, the landscape changed. Modern silicone gel implants use "cohesive" gel—think of it as thicker, more stable gel that holds together better if the shell ruptures. This "gummy bear" implant design became the standard. Today, cohesive silicone gel implants account for roughly 80-85% of the breast augmentation market in the United States, according to data from the American Society of Plastic Surgeons.
The shell itself has also evolved. Manufacturers now use textured surfaces on many implants to reduce the risk of capsular contracture—a condition where scar tissue around the implant tightens and hardens. Smooth implants still exist and are preferred by some surgeons, but textured options have gained significant market share. Some textured implants, however, have been linked to a rare cancer called breast implant-associated anaplastic large cell lymphoma (BIA-ALCL), which led to certain products being recalled or removed from markets outside the US.
Shape variety has expanded too. Traditional round implants remain popular because they project forward and add upper pole fullness. Anatomical or "teardrop" shaped implants mimic the natural slope of breast tissue and appeal to patients wanting a more subtle result. The choice between round and anatomical often depends on body type, existing breast tissue, and desired outcome.
Practical takeaway: If researching breast augmentation, understanding that implant technology from 2000 differs significantly from 2024 matters. Older implants may still be in place in some people, but newer options offer different trade-offs regarding feel, durability, and risk profiles. This context helps explain why surgical recommendations might vary based on individual factors and why implants aren't one-size-fits-all devices.
The choice of implant material affects how an augmentation feels, looks, performs, and ages. While silicone gel and saline have dominated for decades, recent developments have introduced other options worth understanding. Each material carries different considerations regarding cost, longevity, and potential complications.
Free Guide to Pay by Plate Illinois Billing →
Silicone gel implants remain the most commonly chosen option, representing approximately 80% of breast augmentations performed in the United States. The gel inside these implants is a polymer made from silicon—a naturally occurring element. The gel is thicker than the saline alternative and more closely mimics the feel and movement of natural breast tissue. Many surgeons and patients report that silicone gel implants feel more natural, particularly to touch and during movement. The tradeoff is that silicone gel implants cannot be placed through smaller incisions since the pre-filled shells arrive at a set size, whereas saline implants can be placed through smaller incisions and then filled to the desired volume.
Saline implants use the same silicone shell but are filled with sterile salt water mixed with the composition of blood plasma. They cost less to manufacture, which typically translates to lower surgical costs. The primary advantage is that if rupture occurs, the body absorbs the saline without harm. The primary disadvantages include a higher likelihood of rippling visible under the skin and a tendency to feel somewhat firmer than natural breast tissue. Saline implants can sometimes produce an audible sloshing sound with certain movements, though this is rare with modern designs. Saline implants now account for roughly 15-20% of augmentations in the US, but remain popular in some regions and among patients prioritizing lower cost.
Composite implants represent a smaller niche. These combine silicone shells with non-gel fillings such as soy oil or other materials. They were developed partly as a response to silicone concerns in the 1990s, but never gained significant market adoption. Today, they represent less than 5% of the market. Some surgeons still offer them, but they're not widely available and long-term performance data is more limited than for silicone or saline options.
A relatively recent development involves fat transfer breast augmentation, sometimes called autologous fat grafting. This procedure harvests fat from one area of the body (usually the abdomen or thighs) via liposuction, purifies it, and injects it into the breast tissue. The appeal is that it uses the patient's own tissue, avoiding implant-related concerns. The limitations include modest volume increase (typically one to two cup sizes), unpredictable absorption rates (some grafted fat doesn't survive), and the need for multiple sessions to achieve desired results. This option remains less common than implant-based augmentation, representing perhaps 5-10% of breast enhancement procedures, but interest has grown as techniques have improved.
Practical takeaway: Material choice involves weighing natural feel against cost, incision size against rupture safety, and implant permanence against autologous sustainability. There's no universally "best" material—the right choice depends on individual priorities, body type, surgeon recommendation, and budget. Understanding what each material offers helps in conversations with a surgeon about which option aligns with personal goals.
One of the most misunderstood aspects of breast augmentation is how sizing actually works. Patients often discuss desired outcomes in terms of cup sizes—"I want to go from a B to a D"—but cup size alone doesn't determine implant selection. A woman wearing a 32B and a woman wearing a 36B wear the same cup letter but have different underlying breast dimensions. This is why surgeons use measurements like implant volume (measured in cubic centimeters or cc), implant width, and projection rather than relying solely on cup size terminology.
Free Guide to Mold Removal Methods for Walls →
Implant volume typically ranges from 150 cc to 800 cc, though most augmentations fall between 300 cc and 500 cc. A general rule of thumb suggests that every 150 cc increase roughly corresponds to one cup size, but this varies based on existing breast tissue and the patient's frame. A 300 cc implant in someone with narrow chest dimensions might yield different results than the same implant in someone with a wider frame. This is why multiple women with the same implant volume may appear to have achieved different cup sizes.
Implant shape choices break down into two primary categories: round and anatomical. Round implants project fullness both in the center and upper portions of the breast, creating a more prominent upper pole. This shape is particularly popular among younger patients or those wanting a pronounced, dramatic result. Round implants also rotate freely in the breast pocket without concern, so if one rotates, it appears identical to its previous position. Anatomical implants taper gradually from upper to lower portions, mimicking a natural breast's slope. These implants project more in the lower breast and create a subtler appearance. The disadvantage: anatomical implants must maintain a specific orientation to look natural, so rotation is considered a potential complication requiring revision surgery.
Projection refers to how far the implant extends from the chest wall outward. Low-profile implants have minimal forward projection and spread width instead, creating a wider appearance. Moderate-profile implants balance projection and width. High-profile implants project significantly outward relative to their width, creating more pronounced cleavage and projection. Ultra-high-profile implants represent the most extreme projection available. The choice depends on desired proportions and existing chest dimensions. Someone with a very narrow chest might opt for moderate projection to avoid appearing disproportionate, while someone with a broader frame might prefer moderate to high projection.
Modern augmentation planning
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.