Lung function tests, also called pulmonary function tests or PFTs, measure how well your lungs take in oxygen and release carbon dioxide. Think of your lungs like two sponges inside your chest. These tests tell your doctor whether those sponges are absorbing air efficiently, holding onto air when they should, or letting air out properly. Doctors order these tests for different reasons—sometimes to diagnose conditions like asthma or COPD, sometimes to track how a known lung disease is progressing, and sometimes to check how well your lungs are working before surgery.
Learn About Paying Your FGUA Bill Online →
The tests themselves don't hurt. You'll sit in a small room with a machine called a spirometer, which looks like a box with a tube attached. You breathe into that tube while the machine records measurements. The most common measurement is FEV1, which stands for "forced expiratory volume in one second"—basically, how much air you can push out of your lungs in the first second after taking a deep breath. Another key number is FVC, or forced vital capacity, which measures the total amount of air your lungs can hold and release.
The numbers from lung function tests are compared to what's considered normal for someone your age, height, sex, and race. This is important because a 25-year-old athlete will naturally have different lung capacity than a 70-year-old, and that's perfectly normal. Your results get compared to a predicted value—what doctors would expect your lungs to do based on your physical characteristics. If your actual numbers are close to that prediction, your lungs are working as expected. If they're significantly lower, it suggests something is limiting your lung function.
Understanding what these tests measure helps you understand what your doctor is looking for. Some conditions make it hard to get air into your lungs (restrictive diseases). Others make it hard to push air out (obstructive diseases). Lung function tests can distinguish between these patterns, which changes how your doctor will treat you. That's why the numbers matter—they point toward what's actually happening inside your chest.
Practical takeaway: Before your test, ask your doctor why they're ordering it. Knowing whether they're trying to diagnose something new, monitor something known, or clear you for a procedure helps you understand what your results will be used for.
When you get your lung function results back, the most prominent numbers you'll see are FEV1 and FVC, along with the ratio between them (FEV1/FVC). Let's break down what each one actually tells you. FVC is your forced vital capacity—the total amount of air you can breathe out after breathing in as deeply as possible. Imagine filling a bucket with water; the FVC is how full the bucket gets. FEV1 is how much of that water pours out in the first second when you turn the bucket upside down. Together, these numbers paint a picture of your lung health.
Free Guide to Pay by Plate Illinois Billing →
Here's where it gets practical: if your FEV1 is 85% or higher compared to what's predicted for someone like you, that's generally considered normal. If it's between 70% and 84%, it's mildly reduced. Between 50% and 69% is moderate reduction, and below 50% is severe. These categories matter because they help your doctor understand how much your lungs are struggling. Someone with an FEV1 of 72% might notice shortness of breath during vigorous exercise, while someone at 45% might get winded walking to the mailbox.
The FEV1/FVC ratio is where obstructive versus restrictive patterns show up. In people without lung disease, this ratio is usually around 75-80%. If it's below 70%, it often suggests an obstructive problem—your lungs are holding onto air they can't push out efficiently. This pattern shows up in asthma and COPD. If the ratio looks normal but both numbers are low, it might suggest a restrictive problem—you don't have much air to work with in the first place. This pattern appears in conditions like pulmonary fibrosis or when the chest wall itself is stiff.
One number that confuses people is when their FVC is lower than expected. They think, "My lungs can't hold much air," but that's not necessarily the problem. Sometimes FVC drops because someone with an obstructive disease can't empty their lungs completely, so they can't breathe in as much new air. The measurement reflects effort and mechanics, not just capacity. This is why doctors look at the whole pattern, not just one number in isolation.
Practical takeaway: Write down your FEV1 percentage and your FEV1/FVC ratio. These two pieces of information tell you whether your lungs struggle more with holding air or pushing air out, which is fundamental to understanding your diagnosis.
Beyond FEV1 and FVC, your lung function test results might include a section called DLCO or diffusing capacity. This measures something different from the basic spirometry numbers. Instead of measuring how much air moves in and out, DLCO measures how well oxygen actually crosses from the air in your lungs into your bloodstream. It's the difference between having a room full of people (lots of air) and those people actually being able to hear each other (gas exchange happening).
Free Guide to Mold Removal Methods for Walls →
The DLCO test involves breathing in a mixture of gases—usually including carbon monoxide and helium—holding your breath for about 10 seconds, then breathing out. The machine measures how much of those gases transferred from your lungs to your blood. This tells your doctor something spirometry can't: whether the problem is just the pipes (the airways) or also the walls (the alveoli, where oxygen meets blood). A normal DLCO is typically 75% or higher compared to predicted values. Between 60% and 74% is mildly reduced, and below 60% suggests more significant problems with gas exchange.
Why does this matter? Imagine a garden hose with two problems: the water can't flow out efficiently (obstructive), but also the rubber is cracked so water leaks out the sides instead of reaching the end (diffusion problem). Someone with just an obstructive problem might have low FEV1 but normal DLCO. Someone with asthma usually falls into this category. But someone with pulmonary fibrosis or emphysema might have low DLCO because the lung tissue itself is damaged and can't absorb oxygen well. The DLCO reveals this distinction.
A low DLCO combined with low FVC often indicates a restrictive pattern—the lungs are stiff, have less surface area, or the tissue is scarred. This shows up in conditions like interstitial pulmonary fibrosis, where lung tissue gradually becomes thick and scarred, reducing how much oxygen can cross over. A low DLCO with normal or near-normal FEV1/FVC ratio might indicate emphysema, where the destructive process damages the alveolar walls even while airways remain relatively patent. Your doctor uses these combinations to narrow down what might be happening.
Practical takeaway: If your results include a DLCO number, pay attention to it. It's telling you how well gas exchange is working, which is separate from how well air is moving. If it's abnormal, ask your doctor specifically what this means about oxygen getting into your blood.
One concept that trips up many people is the difference between absolute numbers and "percent predicted." Your spirometer might show you have an FEV1 of 2.8 liters. That number by itself doesn't mean much. Is 2.8 liters good or bad? It depends entirely on who you are. A tall athlete might have an FEV1 of 4.2 liters because they have bigger lungs. A small person might have 2.3 liters and be perfectly healthy. This is why doctors compare your numbers to predicted values calculated from population studies based on your age, height, sex, and race.
How to Delete Your Fitbit Account Guide →
The predicted value is literally what researchers have found people like you typically achieve on these tests. Your 2.8-liter FEV1 gets converted to a percentage. If the predicted value for someone your size is 3.5 liters, your percent predicted is 80% (2.8 divided by 3.5 times
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.