Replace Your Kenmore Refrigerator Water Filter

Understanding Your Kenmore Refrigerator Water Filter

Kenmore refrigerators use water filters to remove contaminants from tap water before it flows to your ice maker and water dispenser. These filters contain activated carbon and other materials designed to reduce chlorine taste and odor, sediment, and certain chemical compounds. The filter sits inside your refrigerator or beneath it, depending on your model, and gradually fills with trapped particles over time.

Get Your Free Guide to Blocking Unwanted Emails in Gmail →

Most Kenmore refrigerators use one of several common filter types. The most popular models include the 9081 (side-by-side refrigerators), 46-9081 (bottom-freezer models), and 9030 (older units). Some models use proprietary filter designs specific to their refrigerator line. Before starting any replacement process, you should identify which filter type your refrigerator requires. This information appears on the existing filter itself, in your refrigerator's manual, or on the Kenmore website's product specification pages.

Water filters typically need replacement every six months under normal household use, though this timeframe varies based on your water quality and usage patterns. Some refrigerators display a filter status light that changes color—often from green to red or amber—when the filter needs attention. Even if your refrigerator lacks this indicator, replacing the filter at regular intervals maintains water quality and prevents ice maker malfunctions caused by clogs.

Practical takeaway: Locate your current filter and note its model number. Check your refrigerator's manual or the Kenmore website to confirm the correct replacement filter for your specific model number. Mark your calendar for a replacement every six months as a maintenance reminder.

Locating Your Kenmore Water Filter

The location of your water filter depends on your Kenmore refrigerator's design and age. Most modern Kenmore models place the filter in one of three locations: inside the refrigerator compartment (usually in the upper right corner or behind a kick plate at the bottom), underneath the refrigerator, or on the exterior back wall. Understanding where yours sits is the first step in successful replacement.

Free Guide to Horry County Senior Services →

For refrigerators with interior filters, look inside the fridge near the top right corner. You should see a cylindrical cartridge about four inches long with a plastic housing. This design keeps the filter visible, making it easy to monitor condition and remember replacement schedules. Some models hide the filter behind a plastic panel labeled "Water Filter" or "Filter Access." This panel twists or slides out to reveal the cartridge behind it.

Bottom-freezer and French-door Kenmore models frequently house filters underneath the refrigerator. You may need to remove a kick plate at the bottom front to access it. Simply push the tabs on either side of the plate inward, and it should pop off. Behind this plate, you'll find a cylindrical filter housing mounted to the underside of the refrigerator. The filter cartridge inserts horizontally into this housing.

Some older or specialized models use external filters mounted on the back wall of the refrigerator, typically near the water line connection. These are less common in current models but appear in some commercial-grade or built-in Kenmore units. If you cannot locate your filter using the interior or underneath locations, consult your product manual or contact Kenmore customer service with your model number to receive specific guidance for your unit.

Practical takeaway: Before you purchase a replacement filter, physically locate your current filter. Take a photo of its location and model number. This prevents buying the wrong size and makes the replacement process quicker since you'll know exactly where to work.

Gathering Tools and Materials You'll Need

Replacing a Kenmore water filter requires minimal tools and supplies. Most replacements are designed for homeowners without plumbing experience, as the manufacturers intentionally created simple connection methods. However, having the right items on hand prevents frustration and makes the process faster.

Free Guide to Baltimore Affordable Housing Options →

Essential materials include a replacement water filter compatible with your Kenmore model (confirmed before purchase), a small bowl or cup to catch water drainage, and a clean towel or rag. The replacement filter itself is the most important item—purchasing the correct model number prevents installation problems and ensures proper filtration. Original Kenmore filters typically cost between $40 and $70, though compatible third-party filters are available for $20 to $40.

Optional but helpful tools include an adjustable wrench (for filters with metal fittings), a flashlight (if accessing the filter in a dim space underneath the refrigerator), a small bucket (if significant water drains from the old filter), and work gloves to keep your hands clean during removal. Some filter housings require slight turning force to release, so having a wrench prevents hand strain and slipped fingers.

Before beginning work, shut off your refrigerator's water supply. Locate the water valve behind or underneath your refrigerator where the water line connects. Turn this valve clockwise until it stops—you should feel resistance but do not force it or you may damage the valve. This step prevents water from spraying when you disconnect the old filter. Allow the system to depressurize for a few minutes before removing the old filter.

Practical takeaway: Order your replacement filter a week before your scheduled maintenance date. Before starting the replacement, locate and test your water shut-off valve to confirm it works properly. This prevents the unpleasant surprise of water spraying during filter removal.

Removing Your Old Kenmore Water Filter

The process for removing an old Kenmore water filter varies slightly depending on whether your model uses a push-button, twist-out, or slide-release mechanism. Most modern Kenmore filters use a simple push-button release system that requires no tools. Older models may use a twist-and-pull design that requires slight rotation before removal.

How to Register a Classic Car in Your State →

For push-button filters, position yourself in front of the filter housing with your bowl ready to catch water. Press the button or lever on the side of the housing. This button breaks the water seal and allows the cartridge to slide out. Gently pull the filter straight toward you. Do not pull at an angle or you may damage the housing connection. Water may drip—this is normal as the filter held residual water under pressure. This is why your bowl is essential. Allow the water to drain for several seconds.

For twist-release filters, rotate the housing counterclockwise (like opening a jar lid) until you feel it loosen. Stop as soon as resistance increases—never force it. After a quarter turn or half turn (depending on your model), the housing should separate from the cartridge. Again, water will drip as the seal breaks. Let gravity do the work; pulling hard risks breaking the plastic housing connections.

Slide-release filters, less common in recent Kenmore models, have a button or lever you press while simultaneously pulling the cartridge outward. Press the release button and maintain pressure while pulling toward you with steady, even force. The cartridge should slide free with minimal effort.

After the old filter completely exits the housing, allow any remaining water to drain into your bowl. Dispose of the old filter in your household trash (water filters are not recyclable in most areas due to carbon and other materials). Wipe away any drips inside or around the filter housing with your towel before proceeding to install the new filter.

Practical takeaway: Have your towel and bowl in position before you start. Work slowly and let water drip naturally rather than shaking the filter to speed drainage. Most filters release easily with gentle, steady pressure—if something feels stuck or strained, stop and consult your manual rather than risking damage.

Installing Your New Kenmore Water Filter

Installing a new water filter is typically even simpler than removing the old one. Before inserting the new filter, remove any protective caps or plastic covers on the filter ends. Some Kenmore filters have plastic or foil caps covering the connection points; these prevent dust and debris from entering during storage and shipment. Gently twist or peel these caps off. Do not force them if they seem stuck—they may be sealed tightly for shipping protection, and a moment of steady pressure usually releases them.

Get Your Free Chase Bank Outage Information Guide →

Inspect the filter housing where the old filter was removed. Look for any debris, mineral deposits, or water residue inside. Using your towel, wipe the interior surfaces where the new filter will seat. This step prevents contamination of your fresh filter and ensures a proper watertight seal. Pay special attention to the rubber gasket or O-ring (the circular seal) visible in the housing—g