Replace Your AirTag Battery Step by Step Guide

Understanding Your AirTag Battery and When to Replace It

Apple AirTags use a standard CR2032 coin cell battery, which is a small, flat, round battery commonly found in watches, calculators, and other small electronics. The CR2032 is approximately the size of a dime and contains enough power to keep your AirTag functioning for about one year under normal use conditions. Understanding what type of battery powers your AirTag is the first step toward maintaining it properly.

Create Your YouTube Account and Channel Setup Guide →

The battery inside your AirTag connects to the device's internal circuitry through metal contacts on both sides of the battery. When the battery begins to lose its charge, your AirTag will continue to work, but its range and reliability may decrease. Apple designed AirTags with battery life in mind, and the battery typically lasts longer than many similar tracking devices on the market. However, usage patterns affect how long a battery lasts—AirTags that are moved around frequently or located in areas with many Bluetooth-enabled devices may drain batteries faster than those used less frequently.

Your iPhone or iPad will notify you when your AirTag's battery is running low. You'll receive a notification on your device stating that the battery needs replacement. This warning typically appears when the battery has roughly 10% of its charge remaining, giving you time to plan a battery replacement before the AirTag stops working entirely. Some users report that their AirTags continue to function for several weeks after receiving this notification, though performance may decline gradually.

Practical takeaway: Monitor notifications from your Apple device about AirTag battery status. When you receive a low battery warning, plan to replace the battery within the following week or two to maintain reliable tracking functionality.

Gathering the Materials You'll Need

Before you begin replacing your AirTag battery, gather the necessary materials. You'll need a CR2032 replacement battery, which you can purchase at most pharmacies, electronics retailers, and online marketplaces. A single CR2032 battery typically costs between $2 and $8, depending on the brand and retailer. Quality matters when selecting a replacement battery—brands like Panasonic, Sony, Energizer, and Duracell produce reliable CR2032 batteries that perform well in AirTags. Some users prefer name-brand batteries, while others find that store-brand or generic options work just as well and cost less.

Free Veteran Retirement Planning Information Guide →

You may also want to have a coin or similar flat object available to help you open the AirTag. The back of an AirTag has a small groove designed for a coin or similar tool to fit into, making it easier to rotate and open the device. A dime, penny, or specialized coin works well for this purpose. Some people use a flathead screwdriver or a guitar pick, though these are less ideal because they can potentially damage the plastic housing if too much force is applied. Having your coin or tool ready before you start prevents you from searching for one while holding the AirTag.

A clean, well-lit workspace makes the battery replacement process easier and reduces the risk of losing small parts. A table near a window or under a bright lamp provides adequate visibility to see the small battery and the interior contacts of your AirTag. If possible, keep a small bowl or container nearby—this gives you a safe place to set small parts temporarily if needed, preventing accidental loss.

Practical takeaway: Purchase a CR2032 battery from a reputable retailer before your AirTag battery completely dies. Gather your coin or flat tool and set up a clean, well-lit workspace to make the replacement process straightforward.

Opening Your AirTag Correctly

The AirTag's design makes opening it relatively straightforward when you follow the correct procedure. The device consists of two main parts: a plastic top and bottom that snap together, with the battery compartment located inside. The bottom of the AirTag has a small circular depression or groove designed to accept a coin. Locating this groove is your first step—hold your AirTag with the Apple logo facing up, and look at the underside of the white plastic housing. You'll see a thin metal ring around the edge and a small groove that spans part of the circumference.

Get Your Free Data Backup Recovery Guide →

To open the AirTag, place your coin into the groove on the underside of the device. Apply gentle but firm pressure while rotating the coin counterclockwise (the same direction you'd turn to loosen a bottle cap). You don't need to force it—the grooved design allows the coin to fit securely into the slot, and steady rotational pressure should cause the metal ring to rotate. As you rotate, you'll feel the ring turning; continue rotating until the ring has turned approximately 90 degrees, or about a quarter turn. Stop when you feel resistance—the ring should no longer rotate easily.

Once you've rotated the ring, you can now separate the top plastic portion from the bottom. The metal ring acts as a locking mechanism that holds the two plastic pieces together. With the ring rotated, gently pull the top white plastic piece upward and away from the bottom piece. Don't force it; if you meet resistance, ensure the ring has been rotated far enough. The two pieces should separate with moderate, steady pressure. Inside, you'll find the CR2032 battery sitting in a small circular compartment, typically held loosely in place so it can be easily removed and replaced.

Practical takeaway: Position your AirTag with the logo facing up, find the groove on the underside, insert your coin, and rotate counterclockwise about 90 degrees. Gently pull the top piece away to reveal the battery inside.

Removing the Old Battery and Installing the New One

Once your AirTag is open, you'll see the CR2032 battery sitting in a shallow circular compartment. The battery's positive side (marked with a plus sign or "+") typically faces upward, toward the top white plastic piece. Some AirTags may have the positive side facing downward toward the bottom piece—the orientation varies slightly. Take a moment to note which side is facing up before you remove the old battery, as you'll need to install the new battery in the same orientation.

Get Your Free Email Management Guide for Outlook →

Remove the old battery by gently tilting or prying it up slightly with your fingernail or a plastic tool. The battery isn't glued or fastened down, so it should come free with minimal effort. Place the depleted battery in a safe location—don't leave it lying on a surface where it could roll away and become lost. Some people dispose of old batteries immediately by placing them in a battery recycling container, as CR2032 batteries contain materials that should be recycled rather than thrown in regular trash.

Take your new CR2032 battery and examine it to confirm it's new and hasn't been damaged. The battery should be clean and show no visible corrosion or damage on either the positive or negative sides. Before inserting the new battery, ensure your hands and fingers are relatively dry—moisture can sometimes affect battery performance. Position the new battery in the compartment with the same orientation as the old battery. If the positive side was facing up on the old battery, place the positive side of the new battery facing up as well. The battery should sit flat in the circular compartment without tilting or standing at an angle.

Practical takeaway: Note the orientation of the old battery before removing it. Gently remove the depleted battery, then insert the new CR2032 battery in the same orientation, ensuring it sits flat in the compartment.

Closing Your AirTag and Testing Functionality

With the new battery installed, you're ready to close your AirTag. Align the top white plastic piece with the bottom piece, ensuring they're positioned correctly. The two pieces should fit together smoothly—if you encounter resistance, check that the metal ring is still in the open position (rotated counterclockwise). Once the pieces are aligned and sitting together, take your coin and insert it back into the groove on the underside. This time, you'll rotate the coin clockwise (the opposite direction from opening) to lock the metal ring back into place.

Learn How to Draw a Simple Dragon →

Apply steady, gentle rotational pressure with your coin, turning it clockwise until you feel the ring lock into its closed position. You'll notice a slight resistance change when the ring reaches the locked position. It typically requires about a 90-degree rotation to return the ring to its starting position. Don't over-tighten—the ring should be secure but doesn't require excessive force. Over-tightening can potentially damage the plastic housing or the metal ring's threading mechanism.

After closing your AirTag, test its functionality by opening the Find My app on your iPhone, iPad, or Mac