When you walk into an eye doctor's office, one of the first things you'll do is read letters on a wall chart from a distance. This is called the visual acuity test, and it measures how clearly you can see at different distances. The chart itself—usually the famous Snellen chart with its progressively smaller letters—sits about 20 feet away from where you stand. You'll cover one eye at a time and read the smallest line of letters you can make out.
Learn About Paying Your FGUA Bill Online →
The doctor or technician will note which line you can read clearly. That's where your vision measurement comes from. If you can read the line marked "20/20," that means at 20 feet away, you see what a person with typical vision sees at 20 feet. If you read "20/40," you need to be at 20 feet to see what someone with typical vision can see at 40 feet—meaning your vision is less sharp than average.
This test takes only a few minutes but tells your doctor a lot. It's not about passing or failing; it's about measuring your current vision. Some people get 20/20, others get 20/15 (which is actually sharper than average), and many people get 20/40 or worse. None of these results are permanent. After your eye doctor examines your eyes fully and performs other tests, they may recommend glasses, contacts, or other options that could change your visual acuity significantly.
You might also encounter a variation called the visual acuity test using a handheld chart, especially if you're sitting close to the doctor during your exam. The principle is the same: reading progressively smaller text to measure clarity.
What to know for your appointment: Don't worry about memorizing letters or "studying" for this test. Just read what you can see. If you wear glasses or contacts, you'll typically do this test both with and without them so the doctor can see your current vision in both states.
After the eye chart test, your doctor will likely perform a refraction test. This test determines whether you need corrective lenses and, if so, what prescription strength would work best for you. It's one of the most important parts of your visit because the results directly affect whether you leave with a new glasses or contact lens prescription.
Free Guide to Pay by Plate Illinois Billing →
During a refraction, you'll sit facing a large machine called a phoropter (sometimes called a refractor). This device has multiple lenses built into it, and the doctor will swap different combinations in front of your eyes while asking you which one looks clearer. You'll answer questions like "Is it better with lens one or lens two?" over and over. It might feel repetitive, but each small adjustment helps the doctor narrow down your exact prescription.
The refraction test checks for common vision problems: myopia (nearsightedness), hyperopia (farsightedness), astigmatism (blurred vision at all distances), and presbyopia (age-related difficulty focusing on close objects). Most adults have at least one of these conditions. The refraction test measures how much your eyes deviate from typical focus, which determines your prescription strength.
Some doctors use an automated refractor first—a machine that measures your vision without asking questions. This gives the doctor a starting point, then they fine-tune the results by asking you those comparison questions. This combination approach (automated plus manual) is common in modern practices.
What to know for your appointment: Be honest about which lens combination looks clearer, even if the differences seem tiny. Small variations matter for your final prescription. There's no "right answer"—your perception is the data your doctor needs. If you're unsure between two options, say so; that helps the doctor know to adjust more carefully.
At some point during your vision appointment, someone will measure the pressure inside your eyes. This test, called tonometry, checks for signs of glaucoma—a serious eye condition where elevated pressure damages the optic nerve over time. Many people develop glaucoma without noticing any symptoms until significant damage has occurred, which is why this screening matters.
Free Guide to Mold Removal Methods for Walls →
The most common pressure test uses a method called applanation tonometry. A small probe gently flattens a tiny area of your eye's surface while a measurement is taken. Sounds uncomfortable, but most patients report it's painless. Before this test, your eye will be numbed with drops, so you won't feel the probe. Your eye might water slightly or feel a bit of pressure, but it's brief.
Another common method is non-contact tonometry, sometimes called the "air puff" test because it uses a quick puff of air to measure pressure instead of touching your eye. This version doesn't require numbing drops and takes only seconds. Some people find it less intimidating than the probe method, though the puff can be startling if you're not expecting it.
Normal eye pressure ranges from about 12 to 22 millimeters of mercury (mmHg). If your reading falls outside this range, it doesn't automatically mean you have glaucoma, but it does mean your doctor will want to monitor you more closely or perform additional tests. High eye pressure is one risk factor for glaucoma, but not everyone with elevated pressure develops the condition. Your doctor considers your individual risk factors, family history, and other measurements when assessing your glaucoma risk.
People with a family history of glaucoma, those over 60, and people of African descent (who have higher glaucoma risk) should expect this test as a regular part of their eye exams.
What to know for your appointment: The eye pressure test is routine and nothing to fear. If you're nervous about the air puff, let your doctor know—they may use the probe method instead. Both give reliable measurements.
The slit lamp is a microscope with a bright light that lets your eye doctor examine the front part of your eye in detail. You'll sit with your chin on a rest, position your forehead against a support bar, and the doctor will look through the microscope while moving the light across your eye. It might feel like the doctor is very close to your face, but they're just getting a better view of what's happening inside your eye.
How to Delete Your Fitbit Account Guide →
During this examination, your doctor is looking for several things: the health of your cornea (the clear front surface of your eye), the lens (which can develop cataracts), the iris (the colored part of your eye), and the area where fluid drains from your eye. They're also checking for signs of infection, inflammation, dryness, or other conditions you might not be aware you have.
If you wear contacts, the slit lamp exam helps your doctor make sure your contacts aren't causing irritation or damage to your cornea. They can spot tiny scratches or areas of redness that indicate a problem. Even if your contacts feel fine to you, this exam might reveal something that needs attention.
The slit lamp is also where your doctor might notice signs of other health conditions affecting your eyes. Diabetes, high blood pressure, and autoimmune diseases sometimes show visible signs in the eye. Your eye doctor might be the first medical professional to spot these indicators and recommend you follow up with your regular doctor.
During the slit lamp exam, you might see different colored lights or filters. These aren't scary—they're just tools that help your doctor see different structures more clearly. Some offices use special dyes that glow under certain lights to highlight problems with the cornea or other surfaces.
What to know for your appointment: Keep your head still and try to look at the light without blinking too much. If you feel uncomfortable or need a break, just let your doctor know—they're used to adjusting.
Late in your appointment, your doctor will likely put dilating drops in your eyes. These drops make your pupils (the black circles in the center of your eyes) open wider than normal. This might be the part of the appointment that surprises people most, because dilating drops have some immediate side effects you should know about.
Learn How to Grow Sweet Corn at Home →
Once dilated, your pupils will stay open for several hours—sometimes 4 to 6 hours depending on the drops used. During this time, your eyes will be extra sensitive to light, so everything will look bright, even indoors. You won't be
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.