Learn to Draw a Barn Step by Step

Understanding Basic Barn Structure and Proportions

Before you begin drawing, it helps to understand what makes a barn look like a barn. A typical barn consists of several key structural elements that work together to create its distinctive shape. The main body of a barn is usually a large rectangular structure with vertical walls and a peaked or gabled roof. The proportions matter significantly—most barns are wider than they are tall, and the roof typically takes up about one-third to one-half of the total height of the building.

Free Guide to Making Frosting Recipes at Home →

Barns come in different regional styles. The classic American red barn features a rectangular footprint with a peaked roof, large sliding doors on the side, and smaller windows or vents scattered across the walls. Dutch barns have a similar structure but with a curved roof that provides extra interior space. Bank barns, common in Pennsylvania and other areas with hills, have the main level built into a slope so that animals could be loaded directly into the upper level from the hillside.

The basic proportions to remember: if your barn is 8 units wide, make it roughly 5 to 6 units tall to the roofline, and extend the roof peak another 2 to 3 units above that. Large barn doors typically occupy about one-third of the wall they're on. Windows and vents are generally small relative to the overall wall space. Understanding these proportions before you start drawing prevents your barn from looking too tall, too narrow, or oddly proportioned.

Most barns also sit on a foundation or base that raises them slightly off the ground. This foundation was historically necessary for ventilation and protection from moisture and pests. In your drawing, you can represent this with a simple horizontal line running across the bottom of the barn walls, or with a slight shadow or shaded area beneath the main structure.

Practical takeaway: Sketch light guidelines on your paper before drawing the barn's outline. Use a ruler to create basic rectangles and triangles that represent the walls and roof shape. These guidelines will keep your proportions consistent and make the final drawing look more realistic.

Drawing the Barn's Main Body and Walls

Start your barn drawing by establishing the main rectangular body. Use light pencil strokes so you can erase if needed. Draw a horizontal line across your paper to represent the ground level. From the left end of this line, draw a vertical line upward—this is the left wall of your barn. The height of this line depends on how tall you want your barn, but aim for a height that's roughly 60 to 70 percent of the width you've chosen for the barn's footprint.

Get Your Free Senior Apple Watch Information Guide →

From the top of this left wall line, draw another horizontal line going to the right. This represents the top of the barn walls where they meet the roof. Then draw a vertical line downward to the ground level at the right side of your barn. Finally, connect the right side back to your starting point with a horizontal line along the ground. You now have a basic rectangular outline of the barn's main body.

The next step involves adding depth to suggest three dimensions. If you're drawing the barn from a three-quarter view (showing two sides), you'll want to add a receding side. From the top-right corner of your front-facing wall, draw a line at an angle going back and upward. Do the same from the bottom-right corner. These angled lines should be noticeably shorter than the front wall lines, typically about 40 to 60 percent of their length. Connect these angled lines with a vertical line to complete the receding side of the barn.

Once your basic rectangular structure is in place, you can refine the walls. Real barn walls often have subtle irregularities—weathering, slight bulges, or areas where boards have shifted over time. You don't need to exaggerate these, but adding very slight variations to your wall lines makes the barn look more authentic. Also consider the texture: barns are typically made of wood planks running horizontally. You can suggest this texture with light horizontal lines across the walls, spacing them evenly to represent individual boards.

Practical takeaway: Use light pencil pressure while establishing the basic rectangular structure. Once you're satisfied with the proportions and perspective, you can darken these lines. If you're adding three-dimensional perspective, remember that lines receding into the distance appear shorter and may angle slightly upward or downward depending on your viewpoint.

Creating the Roof and Peak Details

The barn roof is one of the most defining features and deserves careful attention. Most traditional barns feature a gabled roof—a peaked roof with two sloping sides that meet at a ridge line running the length of the barn. To draw this, start by finding the midpoint of the front wall's top edge. From this midpoint, draw a line upward at an angle to the left. The angle and height of this line determine how steep your roof appears. Most barn roofs slope at angles between 30 and 50 degrees from horizontal.

Get Your Free Jury Duty Packing Guide →

From the peak point, draw another line downward and to the right, mirroring the left slope. These two lines should meet at the peak and create a triangular shape above your rectangular barn body. The height of the peak above the barn walls typically ranges from 25 to 50 percent of the barn's wall height. A barn with a taller peak looks more traditional and spacious inside; a shallower peak looks more modern or utilitarian.

Once you have your basic triangular roof shape, you can add dimensional details. If you're viewing the barn from an angle where you see two sides, you'll see two different roof planes. The side facing toward you will appear as a triangle (the gable end), and the roof plane going back will appear as a parallelogram, with the back edge appearing shorter due to perspective. Use light lines to represent where these two roof planes meet at the ridge line.

Barn roofs historically featured shingles or metal panels running from the peak down to the edges. You can suggest this texture without drawing every individual shingle. Light, evenly-spaced horizontal lines across the roof planes create the impression of roofing material without becoming tedious. Vary the spacing slightly and leave some areas lighter than others to suggest how light hits the roof. Many barns have a slight overhang where the roof extends beyond the walls—draw a short line segment showing this overhang on the sides and front of the barn.

Don't forget the roof trim details. The edge where the roof meets the wall (called the fascia) is often a distinct line. Some barns have decorative elements along these edges. The peak of the roof often has a small vent or weathervane, which you can represent with just a few lines. These small details significantly enhance realism without requiring much additional work.

Practical takeaway: The roof should look like it's protecting the structure beneath it. Use shading to show that the roof is a solid, three-dimensional element. The underside of roof overhangs is usually slightly darker since less light reaches it. This shading immediately makes your barn drawing more convincing.

Adding Large Doors and Openings

Barn doors are iconic features that instantly make a drawing recognizable as a barn. Most traditional barns feature large sliding doors, typically positioned on the side of the barn facing the main approach or driveway. These doors are often the tallest and widest openings on the barn, frequently measuring 10 to 14 feet wide and 12 to 16 feet tall—sized to accommodate wagons, tractors, and hay bales being moved in and out.

Learn How to Grow Basil Indoors at Home →

To draw barn doors, first locate where they'll go on your barn. Most doors are positioned roughly in the center of the long wall, or slightly off-center. The doors typically start near the base of the wall and extend upward about two-thirds to three-quarters of the way to the roofline. Draw a large rectangle to represent the overall door opening. The shape is usually taller than it is wide, with proportions roughly 2 units tall by 1.5 units wide.

Barn doors come in different styles. The most common and recognizable is the X-pattern barn door, where two diagonal boards cross the center, and a horizontal board runs across the middle. To draw this pattern, divide your door rectangle in half with a vertical center line. Then draw two diagonal lines from opposite corners that cross in the center. Add a horizontal line about one-third of the way down from the top. This creates the classic barn door appearance. Another common style features vertical boards with horizontal braces, which you can represent with evenly-spaced vertical lines and two or three horizontal lines crossing