The Google Nest Learning Thermostat comes with a circular touchscreen display that sits flat against your wall. This design differs from traditional rectangular thermostats you might have seen in older homes. The display itself is the main interface—there are no physical buttons to press. Instead, you'll interact with it by touching the screen and rotating the outer ring, which acts like a dial.
Learn About Paying Your FGUA Bill Online →
When you first look at your Nest thermostat, you'll notice the screen shows your current temperature in the center, with the target temperature displayed just below it. Around the outer edge of the circular display, you'll see a colored ring. This ring changes color based on your heating or cooling mode. During heating season, the ring turns orange. During cooling season, it turns blue. When your home is at the target temperature and neither heating nor cooling is running, the ring appears gray or dark.
The screen itself displays several key pieces of information at once. At the top, you'll see the day of the week and current time. In the center sits that large current temperature reading. Below that is your target temperature—the temperature you've set the system to reach. On the sides and bottom of the display, you may see additional information like humidity levels or upcoming schedule information, depending on which screen view you're currently looking at.
To navigate the thermostat, you'll use two primary gestures. First, you can swipe up or down on the screen to move between different menu options and settings. Second, you rotate the outer ring clockwise or counterclockwise to adjust your target temperature. This rotating motion is intuitive—turning it clockwise raises the temperature, and turning it counterclockwise lowers it. Each small rotation typically changes the temperature by one degree Fahrenheit.
One important note: the Nest thermostat is designed to respond to both touch and proximity. If you walk near it, the screen may brighten to show you the current temperature and settings. This feature helps you quickly check your system's status without having to fully interact with it. However, accidental touches won't change settings—the thermostat requires deliberate gestures to make adjustments.
Practical takeaway: Before making any adjustments, spend a few minutes familiarizing yourself with what each display element shows. Understanding this basic layout prevents confusion when you need to make quick temperature changes or troubleshoot problems.
Your Nest thermostat operates in several different modes, each designed for different seasons and situations. Learning how to switch between these modes is one of the first tasks you'll need to master. The main modes are Heat, Cool, Heat-Cool (also called Auto), and Off. Understanding when to use each mode will help you maintain comfort while avoiding unnecessary energy consumption.
Free Guide to Pay by Plate Illinois Billing →
To access the mode selection, swipe up on the thermostat's screen. This action opens the main menu where you can see your current mode displayed prominently. You'll see icons or text indicating whether you're in Heat mode, Cool mode, Heat-Cool mode, or Off mode. Swipe up again to cycle through the available modes, or tap directly on the mode name to open a menu where you can select from all available options.
Heat mode is what you'll use during winter months or any time you want the system to warm your home. When Heat mode is active, your furnace or heating system will turn on whenever the home temperature drops below your target temperature. The system will continue heating until your home reaches that target temperature, then it will shut off and wait. If the temperature drops again, the heating cycles on once more. This cycle continues throughout the day and night.
Cool mode is the opposite—you'll use this during summer or warmer months. When Cool mode is active, your air conditioning system will turn on whenever the home temperature rises above your target temperature. The system cools until it reaches your target, then shuts off. If the temperature rises again, the cooling cycles on once more. Using Cool mode during heating season is wasteful and can cost you money, so it's important to switch modes seasonally.
Heat-Cool mode (or Auto mode) is a hybrid setting where the system can both heat and cool as needed. This mode is useful during spring and fall when temperatures fluctuate significantly between day and night. You might set a target temperature of 68 degrees, and the system will heat if your home drops below 68 and cool if it rises above 68. However, this mode uses more energy than using Heat or Cool alone, so most people use it only during transitional seasons.
The Off mode simply turns your system off completely. No heating or cooling occurs, regardless of your home's temperature. You'd use this mode if you're away for an extended period during mild weather, or if you're performing maintenance on your system. Be cautious about leaving your system in Off mode during winter, as pipes can freeze if your home gets too cold.
Practical takeaway: Set a reminder to switch your thermostat mode when seasons change. In most climates, Heat mode is appropriate from October through April, Cool mode from May through September, and Heat-Cool mode during the shoulder months of September and May as weather transitions.
One of the standout features of the Nest thermostat is its ability to learn your patterns and run on a schedule. Rather than manually adjusting your temperature throughout the day, you can set up a schedule that automatically adjusts temperatures at specific times. This approach reduces energy waste and maintains comfort without requiring constant attention.
Free Guide to Mold Removal Methods for Walls →
To set up your schedule, swipe up on the thermostat screen to access the main menu, then look for an option labeled "Schedule" or navigate through the settings menu. The Nest thermostat typically allows you to set different temperatures for different times of day and different days of the week. For example, you might set your thermostat to 68 degrees at 6 AM on weekdays, 72 degrees at 9 AM, 65 degrees at 5 PM, and 62 degrees at 10 PM.
The learning feature works by observing your manual adjustments over time. If you consistently lower the temperature when you leave for work and raise it when you return, the Nest eventually learns this pattern and makes those adjustments automatically. After several weeks of typical usage, many Nest users find that the thermostat's learned schedule matches their preferences so closely that they rarely need to make manual adjustments.
Creating an effective schedule requires thinking about your home's daily rhythm. Most households benefit from a cooler temperature during sleeping hours (around 60-67 degrees depending on personal preference) and a warmer temperature during waking hours (around 68-72 degrees). If your home is empty during work hours, lowering the temperature by 5-10 degrees during that time can reduce your heating bills significantly. Similarly, raising the temperature by 5-10 degrees when you're away during cooling season reduces air conditioning costs.
The Nest thermostat allows you to set different schedules for weekdays versus weekends, which is helpful if your routine differs significantly on different days. For instance, you might have a traditional work schedule with weekdays away from home, but your weekends at home. In this case, your weekday schedule would include a lower temperature during work hours, while your weekend schedule might keep the temperature more consistent throughout the day.
You can also create temporary overrides without disrupting your schedule. If you need to adjust the temperature for a single day or a few hours, simply rotate the outer ring to change the target temperature. The Nest will return to your scheduled temperature at the next scheduled time. This flexibility means you don't have to reprogram your entire schedule for occasional variations.
Practical takeaway: Start with a simple 3-4 temperature point schedule based on your typical day—morning wake-up, daytime, evening, and bedtime. Monitor how this feels for a week, then adjust individual temperatures up or down by 1-2 degrees to find your comfort sweet spot. Let the learning feature work for at least 3-4 weeks before evaluating whether manual adjustments are still necessary.
The Nest thermostat connects to your home's Wi-Fi network, which means you can control it from anywhere using the Google Nest app on your smartphone or tablet. This remote access proves invaluable when you're away from home and want to adjust your heating or cooling without waiting until you return.
How to Delete Your Fitbit Account Guide →
To set up remote access, you'll need to create a Google account if you don't
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.