An AirTag is a small tracking device made by Apple that helps you find things. It's about the size of a coin β roughly 1.26 inches in diameter and weighing just 0.39 ounces. The device uses Bluetooth technology to communicate with your iPhone, iPad, or Mac, sending location data when you need to know where something is.
Learn About Paying Your FGUA Bill Online β
People use AirTags for different reasons. Some attach them to keys that frequently go missing. Others put them in bags, backpacks, or luggage to track them while traveling. Pet owners sometimes attach them to collars, though AirTags work best when they move with people regularly (since they rely on the broader Apple device network to report location). The device isn't a GPS tracker like those for vehicles β it works through something called Bluetooth Low Energy, which means it has a range of about 30 feet when directly communicating with your device.
AirTags come in white and cost $29 each, or you can purchase a four-pack for $99. They're durable and water-resistant to a degree (they meet IP67 standards, meaning they can handle immersion in water up to one meter deep for up to 30 minutes). The battery lasts about one year before needing replacement, and you can swap in a standard CR2032 coin cell battery yourself.
Before spending money on an AirTag, consider whether you have devices it can work with. You'll need at least one Apple device β an iPhone, iPad, or Mac β to set up and use an AirTag. If you only use Android devices, an AirTag won't function for your needs.
Practical takeaway: Understand that an AirTag is a Bluetooth-based tracking device with a 30-foot range, not a GPS tracker. It requires Apple devices to work and costs $29 per unit. Before purchasing, confirm you own compatible Apple hardware.
Setting up an AirTag requires meeting several technical requirements. Your Apple device needs to run specific software versions. If you're using an iPhone, you'll need iOS 14.3 or later. iPad users need iPadOS 14.3 or later. Mac users require macOS 11.1 or later. The older your device, the more important it is to check your current software version β Apple stopped supporting some older models years ago, meaning they can't run the necessary software to work with AirTags.
Free Guide to Pay by Plate Illinois Billing β
You'll also need an Apple ID. This is the account you use to sign into your Apple devices and access services like iCloud, the App Store, and Apple Music. If you don't have one, you can create it for free through your iPhone's Settings app or at appleid.apple.com. Your Apple ID is tied to your location data, so make sure you're comfortable with how Apple stores and uses this information. Read Apple's privacy policy to understand their data practices β they claim to use encryption and don't store your location history, but it's worth reviewing their claims yourself.
Your Apple device needs to have Bluetooth enabled. This setting is usually in your device's Control Center or Settings app. When you set up an AirTag, Bluetooth must be on to establish the connection. Similarly, you should have Wi-Fi or cellular internet available during setup, though this is mainly for verifying your Apple ID and connecting to iCloud.
Location services must be turned on in your device settings. This allows your iPhone or iPad to work with the AirTag's location features. Some people disable location services for privacy reasons β if you do, you'll need to turn it back on specifically for the Find My app to work with your AirTag.
One often-overlooked requirement is near-field communication, or NFC. Some setup methods use NFC to speed up the pairing process, though it's not strictly necessary β you can set up an AirTag without it, just with an extra step or two.
Practical takeaway: Before attempting setup, verify that your Apple device runs current software (iOS 14.3+, iPadOS 14.3+, or macOS 11.1+), you have an Apple ID, Bluetooth is on, Location Services is on, and you have internet connectivity. These aren't optional β without them, setup won't complete.
When your AirTag arrives, the box contains the AirTag itself, a small CR2032 battery, and documentation. The battery comes pre-installed inside the AirTag. Before you open the box, understand that the AirTag is already in "pairing mode" from the factory, meaning it's ready to connect to your device. This factory state lasts only a limited time β usually a few minutes to a few hours depending on various factors β so don't wait weeks to set it up after purchasing.
Free Guide to Mold Removal Methods for Walls β
When you remove the AirTag from its packaging, you'll notice a seam around the middle of the white disc. This seam indicates where the device opens. You don't need to open it immediately β the battery inside is ready to go. However, some people do open theirs right away out of curiosity. If you do, you'll find the CR2032 battery sitting in a small compartment. The battery is held in place by a plastic pull-tab. If you remove this tab (which disconnects the battery temporarily), the AirTag will restart its setup window when you reconnect it.
Here's a practical note: many users choose to open their AirTag and remove the battery tab intentionally if they're not ready to set it up immediately. This keeps the device in a neutral state rather than burning through its setup window. When you're ready to proceed, you reconnect the battery, and the AirTag enters pairing mode again.
The physical AirTag itself has no buttons, switches, or screens. It's completely passive until you interact with it through your Apple device. There are small speaker holes on the bottom that produce sounds when you use the Find My app to locate it. The top and bottom are smooth, while the sides have a glossy edge. It's designed to attach to keychains or slip into bags via accessories (sold separately) β the AirTag itself doesn't include an attachment point.
Practical takeaway: The AirTag comes with a pre-installed battery and is factory-ready for setup. It has no physical controls, buttons, or display. You can intentionally disconnect the battery if you're not ready to set up right away, which resets the setup window for later use.
The actual setup process happens through Apple's Find My app, which comes pre-installed on all recent iPhones, iPads, and Macs. Open this app on your device. If you can't find it, search for "Find My" using your device's search function. Once the app opens, look for a plus sign (+) or an "Add" button. This is typically located in the top right corner or within the app's main menu. Tap this button to begin adding a new item.
How to Delete Your Fitbit Account Guide β
Your device will show you a list of options for what you're adding. Select "AirTag" from this list. At this point, if your AirTag's battery is connected (or if it's in the factory state), your device should detect it within a few seconds. You'll see the AirTag appear on your screen, often displaying a large icon or image. Tap on it to confirm pairing. Your device may ask permission to use Bluetooth β grant this permission for the pairing to continue.
Next, you'll name your AirTag. Think about what you're tracking. If it's attached to your keys, you might name it "House Keys" or "Car Keys." If it's in your travel bag, "Luggage" works well. If you have multiple AirTags, descriptive names help you distinguish between them in the Find My app. The name appears as text when you view your AirTags list, so make it something you'll recognize. Apple provides some quick naming suggestions β you can use one of these or type your own custom name.
Once you've named it, your device will connect the AirTag to your iCloud account. This process happens automatically and requires an active internet connection. Your device uploads information to Apple's servers that links the AirTag to your account, so it knows which AirTag belongs to you. You should never see an AirTag that belongs to someone else in your Find My app.
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.