The small light that illuminates your licence plate serves a purpose beyond convenience—it's a legal requirement in virtually every jurisdiction. When this light burns out, you're driving around in violation of traffic regulations, even if you don't realize it. Understanding why these lights fail so frequently helps you recognize the problem early and take action before a traffic stop becomes a possibility.
Learn About Paying Your FGUA Bill Online →
Licence plate lights are typically incandescent bulbs or LEDs housed in a fixture mounted directly above or below your plate. These bulbs work harder than you might think. They're exposed to constant temperature fluctuations—heating up when they're on, cooling down when the car sits overnight. In winter, a bulb that's already warm gets hit with cold air the moment you step outside, creating stress on the filament. In summer, the heat buildup under the rear bumper area can reduce bulb lifespan. Most standard incandescent licence plate bulbs last between 500 and 1,000 hours of use, which translates to roughly one to three years depending on how often you drive at night.
The environment where your licence plate light sits makes it vulnerable to moisture and corrosion. Road salt spray, rain, and humidity can seep into the fixture housing, causing electrical connections to corrode over time. This corrosion doesn't just burn out bulbs—it can also cause intermittent lighting, where the light flickers on and off. Some drivers notice their licence plate light works fine in the driveway but fails during a drive, only to work again the next evening. This inconsistency points to a corroded connection rather than a dead bulb.
Takeaway: Licence plate lights fail frequently due to temperature stress, environmental exposure, and normal wear. Check your licence plate lighting monthly by parking in a dark area at night and walking behind your vehicle to confirm both lights are functioning. If one isn't illuminating, you'll want to replace it within the week to stay compliant with traffic laws.
Before you can replace a licence plate light, you need to know which type of bulb your vehicle originally came with. This matters because different vehicles use different bulb specifications, and using the wrong bulb can mean poor lighting, fitment problems, or potential electrical issues. Your owner's manual is the definitive source for this information, but if you've misplaced it, you have several other options.
Free Guide to Pay by Plate Illinois Billing →
Most vehicles manufactured after 2000 use one of three standard bulb types for licence plate lighting: the 194 (also called 168 or W5W), the 921, or the 912 bulb. Older vehicles might use different specifications. If you're unsure, you can remove the existing bulb (we'll cover how in the next section) and check the base or casing for printed numbers. These numbers directly correspond to the replacement bulb you'll need. Bring that number to any auto parts retailer, and they can hand you the exact match.
Alternatively, many auto parts stores offer a free identification service. You can take a photo of your licence plate area or bring your car in, and staff members can tell you the specific bulb type. This service takes only a few minutes and removes guesswork. When you have the bulb type identified, ask the staff member whether your vehicle uses incandescent or LED bulbs originally. This distinction matters because some vehicles with LED plate lights require specific LED replacement bulbs rather than traditional incandescent ones. Using an incandescent bulb in a vehicle designed for LED can cause the light to flicker or not illuminate at all due to different electrical draw characteristics.
Takeaway: Your vehicle's owner's manual contains the exact bulb specification you need. If you don't have the manual, remove the old bulb and check for identifying numbers on the base, or visit an auto parts store for a free identification check. Knowing whether your vehicle originally used incandescent or LED bulbs ensures you buy the correct replacement.
One common misconception about licence plate light replacement is that it's a complicated job requiring specialized tools. In reality, most people have everything they need already at home. The job is straightforward enough that you won't need to visit a mechanic, and the materials cost between $3 and $25 depending on bulb type.
Free Guide to Mold Removal Methods for Walls →
Start with the bulb itself—you've already identified which type you need from the previous section. Buy one or two replacement bulbs. It's practical to buy two because if one fixture has burned out, the other might be aging and could fail soon. Most auto parts stores sell individual bulbs, but they're sometimes cheaper when purchased in pairs. Keep your receipt; if you install the bulb incorrectly or discover you bought the wrong type, you'll want to exchange it.
Next, gather basic tools from your garage or kitchen drawer. You'll need a screwdriver—either Phillips head or flathead, depending on your vehicle model. To figure out which type, look at your licence plate fixture. If the mounting screws have an X-shaped slot, you need Phillips; if they have a straight slot, you need flathead. Bring a flashlight or use your phone's flashlight to see the fixture clearly. A small cloth or paper towel is helpful for wiping away any corrosion or debris you find. Some people bring work gloves, though they're optional. If you find significant corrosion in the fixture, white vinegar on a cloth can clean corroded connections, and isopropyl alcohol (70% concentration, like rubbing alcohol) helps dry electrical connections safely.
The entire tool kit costs nothing if you use items already in your home. The job takes 15 to 30 minutes depending on how tight the fixture housing is and whether corrosion has built up. You don't need to lift your vehicle, don't need a jack, and can do this in your driveway during daylight hours.
Takeaway: Gather your replacement bulb, a screwdriver (Phillips or flathead depending on your fixture), a flashlight, and a cloth. If corrosion is visible, bring white vinegar and isopropyl alcohol. These materials are inexpensive and likely already in your home. No specialized tools or equipment are necessary.
Now that you have your materials ready, the actual removal process begins. First, position your vehicle so you can access the licence plate comfortably. This might mean parking in your driveway or garage where you have good lighting and space to work. Engage the parking brake and turn off the engine. If you're working during daylight, turn on your headlights or interior lights so the licence plate lights are on—this helps you see exactly which fixture needs replacing when you get to the back.
How to Delete Your Fitbit Account Guide →
Walk to the rear of your vehicle and locate the licence plate light fixtures. Most vehicles have two small housings mounted above the plate, usually integrated into the bumper or rear panel. Some vehicles have one light, while luxury or large vehicles might have more. Look closely at how the fixture is mounted. You'll see either small screws holding it in place or, less commonly, a connector that twists or clips. Most fixtures are secured with one or two small screws.
Using your screwdriver, carefully unscrew these mounting screws. Don't force them—if they're stuck due to corrosion, apply a tiny amount of penetrating oil (like WD-40) and wait a few minutes. Once the screws are out, gently pull the fixture housing away from the bumper. You might feel slight resistance if there's weatherstripping or if the fixture has been in place for years. Pull steadily but gently; these fixtures are plastic and can crack if yanked hard.
Once the fixture is out, you'll see the bulb socket. In most cases, the bulb is inserted straight in and twisted clockwise to lock, similar to a light bulb in a lamp. Grip the bulb gently and turn it counterclockwise until it comes loose. It should unscrew with light pressure—if you encounter extreme resistance, stop and apply a small amount of penetrating oil around the base. Once the old bulb is out, inspect the socket. If you see white or green corrosion, this explains why the bulb burned out prematurely. Clean the socket with your cloth, and if corrosion is heavy, use vinegar on the cloth to dissolve it. Wipe dry with a clean cloth or let it air-dry for a minute.
Takeaway: Access the fixture by unscrewing the mounting hardware,
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.