Every tire manufactured in the United States carries a Department of Transportation (DOT) code stamped on its sidewall. This code includes a three-digit number that tells you when the tire was made. Understanding this number is one of the most practical vehicle maintenance skills you can develop, yet many drivers have never looked at it.
Learn About Paying Your FGUA Bill Online →
The three-digit code appears at the end of a longer DOT identification number. The format is simple: the first two digits represent the week of the year (01 through 53), and the third digit represents the year. So if you see "237," that means the tire was manufactured in the 23rd week of 2007. A code reading "089" indicates the 8th week of 2009.
Prior to 2000, manufacturers used a two-digit year code, which created ambiguity. A tire from 1995 and one from 1985 would both show "95." This confusion is exactly why the system changed. Modern codes eliminate this problem by using a single digit for the year, cycling from 0 (2000) through 9 (2009), then returning to 0 (2010), and continuing the pattern.
The location of this code varies slightly between tire brands. You'll find it on the sidewall—the outer edge of the tire. Depending on the tire's design, it may be on the inner sidewall (the side facing the vehicle's interior) or the outer sidewall. If you can't locate it immediately, run your finger around the entire sidewall. The code is always there; you may just need to look more carefully. Many people shine a flashlight on the sidewall to make the stamped numbers more visible.
Practical Takeaway: Locate the DOT code on one of your tires right now. Write down the three-digit number and practice identifying the week and year. This becomes automatic once you've done it once or twice.
Tire age affects safety in ways that have nothing to do with tread depth. Even if a tire has plenty of tread remaining, the rubber compounds deteriorate over time. Heat, oxygen, and sunlight cause a chemical breakdown in the rubber, making it less flexible and more prone to cracking. This degradation happens whether you drive the tire or let it sit in your garage.
Free Guide to Pay by Plate Illinois Billing →
The tire industry and the National Highway Traffic Safety Administration (NHTSA) recognize that tires older than six years begin showing measurable signs of aging. By age ten, structural degradation becomes a significant safety concern, even if the tire looks fine. This is why many tire retailers and manufacturers recommend replacement around the ten-year mark, regardless of remaining tread.
A practical example: imagine you purchase a vehicle with low-mileage tires that are already five years old. The tread might measure 9/32 of an inch (well above the legal minimum of 2/32), but those tires may only have another year or two of safe life remaining. If you're unaware of the manufacture date, you might drive confidently thinking you have years of use left, when in reality you're approaching a point where structural failure becomes more likely.
Weather conditions accelerate this aging process. Tires in hot climates like Arizona or Florida age faster than those in cooler regions. Tires that sit in direct sunlight rather than shade deteriorate more quickly. Storage conditions matter too—tires stored in a basement outlast those stored in an attic or garage with temperature fluctuations. Understanding your tire's age helps you factor these variables into your maintenance decisions.
Practical Takeaway: Check the manufacture dates on all four tires. If any tire is older than six years, begin planning for replacement even if tread depth appears adequate. If any tire exceeds ten years, replace it regardless of tread condition.
Finding the DOT code requires a systematic approach. Start with the vehicle parked on level ground. You'll need a flashlight or your phone's light source, and optionally a magnifying glass if you have vision concerns. Walk around the vehicle and examine each tire's sidewall carefully. The DOT code is molded into the rubber itself, so you're looking for raised or recessed lettering, not printed labels.
Free Guide to Mold Removal Methods for Walls →
The complete DOT identification number is quite long—sometimes 8 to 13 characters. It begins with "DOT" followed by a plant code (2 letters), a tire size code (2 numbers), and then a compliance code (4 numbers). After all that comes the three-digit manufacture date you're looking for. The manufacture date is always the last three digits of this entire sequence.
Here's a concrete example. Imagine the full code reads: DOT 2K9L F4K 237. Breaking this down: "DOT" signals the start, "2K" identifies the manufacturing plant, "9L" is a tire size designation, "F4K" is a compliance code, and "237" is your target—the manufacture date. This tire was made in the 23rd week of 2007.
One common mistake: confusing other numbers on the sidewall with the DOT code. Tire sidewalls display multiple numbers, including the tire size, load rating, and speed rating. None of these are your manufacture date. The DOT code is the one that specifically begins with "DOT" and ends with three digits representing the week and year. Focus on finding this sequence first, then isolate the last three characters.
If you can't find a code on the outer sidewall, check the inner sidewall. This requires getting low to the ground and shining your light toward the inside of the tire. Many modern tires place the DOT code on this inner wall to protect it from UV exposure and weather. Take your time with this search—the code is there; you may simply need more light or a different angle.
Practical Takeaway: Create a simple record of your four tires' manufacture dates. Write them down in your vehicle's maintenance log or snap a photo of each sidewall. This record becomes invaluable if you ever need to evaluate whether a tire failure was due to age-related degradation.
The first two digits represent the week of the year, numbered from 01 (first week) through 53 (final week, in years where applicable). Understanding this system prevents misreading codes. A tire with code "527" was manufactured in week 52 of 2007, not week 52 of year 2017. The single-digit year code comes last and cannot be separated from the week number.
How to Delete Your Fitbit Account Guide →
The single-digit year codes cycle predictably. Tires made in 2020 display year code "0," the same as tires from 2010 and 2000. The context of surrounding digits and your general knowledge of when you acquired the tire helps clarify which decade you're examining. However, if you're buying used tires or evaluating an older vehicle, this can create ambiguity. When in doubt, assume the most recent decade. A code "347" is far more likely from 2014 (34th week of 2014) than from 2004.
Different manufacturers may slightly vary how they present this information, though all follow DOT standards. Some display the code with a triangular symbol next to the date digits to make them easier to locate. Others integrate the code seamlessly into surrounding text. The standardized format means that regardless of tire brand, the interpretation remains the same: last three digits, first two are the week, final one is the year.
Real-world example: You're examining a tire with the code "089." This could represent 2008 (week 08) or 2018 (week 08). To determine which, consider the vehicle's purchase date, the tread depth, and whether you have other documentation about when tires were replaced. A tire showing 8/32 of an inch of tread depth is more likely from 2008 (now significantly worn) than 2018 (not yet substantially worn). These contextual clues help you interpret the code correctly.
Practical Takeaway: When reading a tire code, always check the week number first (first two digits), then note the year digit. Write down the full interpretation—not just the numbers, but what they mean: "Week 18 of 2019" or "Week 03 of 2015
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.