GE manufactures several lines of universal remotes, each designed to work with different television brands and entertainment systems. The most common models you'll encounter include the GE 24922, GE 24944, and GE 33709, though newer versions continue to appear as technology evolves. Each model uses slightly different programming approaches, which is why understanding which remote you own matters before you begin.
Learn About Paying Your FGUA Bill Online →
Universal remotes from GE work by transmitting infrared signals that mimic the commands from your television's original remote. The remote contains a library of codes organized by manufacturer—so when you program it for a Sony TV, you're essentially telling the remote which Sony codes to use. This library can hold codes from multiple brands simultaneously, allowing one remote to control your television, soundbar, streaming device, and other components.
The physical design of GE universal remotes typically features a standard layout with numbered buttons, volume and channel controls, and dedicated buttons for specific functions like power, input selection, and menu navigation. Older GE models use a setup button or mode button to enter programming, while some newer versions employ a different interface. Understanding your specific model prevents frustration when instructions don't match your remote's actual buttons.
You can identify your GE remote model by looking at the back or bottom of the device, where manufacturers print model numbers. Common locations include the battery compartment area or the reverse side of the remote itself. Recording your model number in a notes app or on paper prevents confusion later when you need to troubleshoot or find replacement codes.
Takeaway: Locate your GE remote's model number and review the manufacturer's documentation specific to that model before beginning programming. This single step prevents hours of confusion when instructions don't match your device.
The code search method represents the most straightforward way to program many GE universal remotes. This approach involves holding down the setup or mode button while the remote cycles through its entire library of codes, automatically testing each one against your television or device. When the device responds—typically by turning off or responding to a command—you stop the process and save that code.
Free Guide to Pay by Plate Illinois Billing →
To perform code search on most GE models, first point the remote at your television or device. Press and hold the setup button until you see an indicator light turn on (usually a red or amber light on the remote itself). This light confirms the remote has entered programming mode. Then press the power button repeatedly. With each press, the remote transmits a different code from its library. When your television or device responds to a code—for instance, by turning off—release the buttons immediately.
After the device responds, press the power button one more time to confirm the code works. If the device turns back on, you've found the correct code. At this point, press the setup button again to save the code and exit programming mode. Some GE models require you to press the select or enter button to confirm, so checking your specific model's instructions matters here.
The code search method works best in a room with minimal background light and when you're directly facing the television with the remote. Reflective surfaces or competing infrared signals from other devices (like mobile phones or tablets) can sometimes interfere with the process, so removing these distractions improves success rates. The entire process typically takes between two and ten minutes depending on where your device's code appears in the remote's library.
Takeaway: The code search method requires patience but works without needing to know your device's specific code number in advance. Keep the remote pointed at your device throughout the process and watch carefully for any response to know when you've found the correct code.
If you've obtained your device's programming code through research or previous documentation, direct code entry offers a faster alternative to code search. This method involves entering a specific numerical code directly into your GE remote. Code lookup resources exist online through GE's website, manufacturer databases, and various remote programming guides that catalog codes by television brand and model.
Free Guide to Mold Removal Methods for Walls →
Finding your device's code requires identifying both the manufacturer and the specific model of your television or device. For televisions, this information appears in the corner of your screen during startup, on a sticker on the back of the device, or in the settings menu. Once you've identified whether you have a Sony, LG, Samsung, Vizio, or other brand, you can search GE's code databases online using your brand name and model number.
Once you have your code, the entry process differs slightly by GE remote model. On many models, you'll press the setup button until the indicator light activates. Then you'll enter your device code using the number pad on the remote. After entering the code, press the power button to test whether the device responds. If it does, press setup again to save the code. If it doesn't, press setup to clear the entry and try a different code.
Code databases may list multiple codes for a single device because manufacturers sometimes change codes between production batches or use different codes for different regions. If your first code doesn't work, try the next one listed. Some devices also respond differently depending on the code used—one code might control the power and volume, while another provides additional functions. Testing each code helps you identify which one provides the most complete control.
Takeaway: Direct code entry works faster than code search if you invest time in finding your device's correct code beforehand. Bookmark the GE code database and keep a list of codes for all your devices in case you need to reprogram later.
One of the primary reasons people choose universal remotes is the ability to control multiple devices from a single unit. GE universal remotes can typically store codes for at least three to four different devices—your television, a cable or satellite box, a streaming device, and possibly a soundbar or audio receiver. Programming multiple devices requires understanding how your specific remote separates these different codes and how you switch between controlling different devices.
How to Delete Your Fitbit Account Guide →
Most GE universal remotes use dedicated mode buttons or input buttons to switch between devices. For instance, you might press a TV button to control your television, then press a cable button to control your cable box. Some older models use a mode button that cycles through different device modes each time you press it. Newer models may feature dedicated buttons for each major device type. Your remote's manual specifies which buttons control which devices.
To program multiple devices, you'll repeat the code search or direct entry process for each device separately. Before starting with your second device, press the button that corresponds to that device (like the cable button or audio button) to enter its programming mode. Then follow the same setup and code entry process you used for your first device. The remote stores these separate codes and remembers which button controls which device type.
A practical approach involves programming your devices in this order: television first, then your primary video source like cable or streaming, and finally audio or other devices. This prioritization means your most-used controls get thoroughly tested first. After programming each device, test all the major functions—power, volume, channel or menu navigation—to confirm the code provides adequate control. Some devices respond to certain codes better than others, so exploring different codes might be necessary.
Takeaway: Program devices one at a time, starting with your television and most-used source. Test each device's major functions before moving to the next one to identify any codes that don't provide complete control.
Despite straightforward instructions, GE universal remote programming occasionally encounters obstacles. The most common issue involves the remote not responding when you press setup—typically caused by dead or weak batteries. Always replace batteries with fresh alkaline batteries before troubleshooting anything else. Alkaline batteries provide the consistent power infrared transmission requires, while older or rechargeable batteries sometimes lack sufficient voltage.
Learn How to Grow Sweet Corn at Home →
Another frequent problem occurs when code search cycles through the entire library without stopping. This happens when your device's code doesn't exist in the remote's database. Older television models or less common brands sometimes lack built-in codes. In these cases, research whether your device manufacturer has codes available through their support website or whether specialized databases online contain codes for less common devices. Some vintage televisions may require workarounds or adapter solutions rather than standard universal remote programming.
Interference from other infrared sources can also prevent successful programming. Mobile phones emit infrared signals, as do some streaming devices and television set-top boxes. During programming, turn off or move away from other devices that might emit infrared. Remove items like phone chargers, tablets
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.