Learn How to Make Rainbow Loom Bracelets

What Are Rainbow Loom Bracelets and How Did They Become Popular

Rainbow Loom bracelets are colorful woven jewelry pieces made from small rubber bands. The craft uses a plastic loom—a small board with pegs arranged in rows—to hold the bands in place while you weave them together. Each finished bracelet typically uses between 75 and 150 rubber bands, depending on the pattern and bracelet size. The bands come in dozens of colors, from basic primary colors to metallic, neon, and pastel shades.

Free Guide to Understanding Stalking and Protection Options →

The Rainbow Loom toy was invented by Cheong Choon Ng, a Malaysian engineer, who developed it around 2010 as a hobby craft. He created the loom to make bracelets with his two daughters during free time. The product gained significant commercial attention when it was featured on major television shopping networks in 2012 and 2013. Sales data from that period showed the Rainbow Loom becoming one of the top-selling toys during the holiday season, with some reports indicating over 5 million units were sold within the first two years of widespread distribution.

The craft experienced a genuine cultural phenomenon, particularly among children ages 7 to 14. Online video platforms became flooded with tutorial content, and the hashtag #rainbowloom accumulated millions of posts on social media platforms. Schools reported students trading bracelets as a form of social currency during recess. The trend has remained steady over the past decade, with new loom variations and accessories continuing to be produced and sold worldwide.

Takeaway: Rainbow Loom bracelets represent a legitimate craft trend that has maintained popularity for over a decade, with the appeal rooted in creative expression, affordable materials, and the satisfaction of completing a wearable finished product.

Gathering Your Materials and Setting Up Your Workspace

To begin making Rainbow Loom bracelets, you'll need several basic materials. The foundation is the loom itself—the most common version is the standard Rainbow Loom board, which measures approximately 6 inches long and contains 36 pegs arranged in a distinctive pattern. Beyond the loom, you'll need rubber bands, a hook tool (usually included with the loom purchase), and optionally some S-clips or C-clips to secure the ends of finished bracelets.

Get Your Free BMW Military Discount Information Guide →

Rubber bands are the primary consumable material. Most Rainbow Loom band packs contain approximately 600 bands per package, with prices ranging from $5 to $15 depending on the retailer and band quality. A single basic bracelet uses roughly 100 bands, meaning one package can create multiple bracelets. Buying bands in bulk packs is more economical than purchasing individual color assortments. Many crafters store their bands in clear containers, small jars, or ziplock bags organized by color to make pattern planning easier.

Your workspace should be clean, organized, and well-lit. A table or desk works well, as it provides a stable surface for the loom. Natural daylight or a desk lamp helps you see the small bands clearly. Keep your materials within arm's reach—organize bands by color in containers, place your loom on a non-slip surface (a small towel or rubber mat works), and keep your hook tool nearby. Having tissue or a small cloth available is useful for wiping your hands, as rubber bands can sometimes leave slight residue.

Many people find it helpful to reference pattern instructions while working. You might want a phone or tablet holder or printed instruction sheets at your workspace. Some crafters also keep a small notebook nearby to sketch custom color patterns before starting. Establishing good workspace habits prevents frustration and makes the entire process more enjoyable.

Takeaway: Proper organization of materials and workspace setup takes minimal time but significantly improves your efficiency and enjoyment when making multiple bracelets.

Learning the Basic Single-Chain Bracelet Pattern

The single-chain bracelet, also called the "Single" or "Chain" pattern, is the fundamental starting point for Rainbow Loom crafting. This pattern creates a simple, elegant bracelet and teaches you the core techniques used in more complex designs. The pattern works by wrapping bands around pegs in a sequential manner, then using a hook tool to pull bands over other bands to create interlocking loops.

Learn About Michigan's Mackinac Bridge History →

To start, place your loom in front of you with the arrow pointing away from your body. Take your first rubber band and place it on the first peg (the one nearest the arrow). Then, move to the second peg directly below and place another band between the first and second pegs. Continue this process down the middle column of pegs until you reach the bottom. This creates your foundation line. For a standard adult bracelet, you'll typically use 8 to 10 bands for the foundation, depending on desired length.

Next comes the weaving step. Starting at the bottom of your foundation line, insert your hook tool underneath the bottom band on the first peg. Pull it up and over the peg, then pull the band above it over the peg as well. This creates your first loop. Move up to the next peg and repeat the same action. Continue this process all the way up the foundation, which creates your first complete chain.

Once you've completed your first chain, you'll repeat the weaving process. Place new bands between the same pegs (going back down from top to bottom), then weave them up again using the same hook technique. Most single-chain bracelets require 4 to 6 complete chain cycles to reach the desired length. When you're done weaving, you'll remove your bracelet from the loom and secure both ends using S-clips or C-clips to prevent the bands from unraveling.

Takeaway: Mastering the single-chain pattern gives you the fundamental skills—proper hook insertion, band manipulation, and pattern repetition—that form the foundation for creating more intricate bracelet designs.

Exploring Popular Intermediate Patterns and Techniques

Once you're comfortable with the basic single-chain, numerous intermediate patterns offer more visual interest while remaining manageable for developing crafters. The "Fishtail" pattern is particularly popular and creates a distinctive braided appearance. This pattern uses only the middle two columns of pegs on your loom, making it geometrically simpler than single-chain designs. The fishtail requires placing bands in a specific cross pattern, then weaving them with a particular technique that leaves bands on the outer edges of the middle pegs, creating the fishtail's characteristic look.

Get Your Free Gravestone Cleaning Guide →

The "Diamond" pattern creates bracelets with diamond-shaped designs running along the length. This pattern uses three columns of pegs and introduces the concept of "stacking" bands—placing multiple bands on a single peg before weaving. The stacking technique creates visual depth and texture in the final bracelet. To make a diamond pattern, you place foundation bands down the middle column, then add diagonal bands between the middle and side columns, creating the diamond shape. The weaving follows a specific sequence that requires more attention to peg order than the simple chain.

The "Starburst" pattern creates bracelets with prominent star or flower-shaped designs. This pattern uses multiple columns and involves wrapping bands around pegs in ways that differ from previous patterns. Starburst designs use what's called a "peg wrap"—where you wrap a single band around a peg multiple times—to create the dimensional effect. This technique teaches you that band placement isn't always between two pegs; sometimes bands are used creatively on individual pegs to create visual effects.

The "Hexafish" pattern combines elements of fishtail and starburst designs, using six columns of the loom to create wide, intricate bracelets. This pattern demonstrates how different loom sections can be used simultaneously. Learning hexafish helps you understand that the loom's layout offers multiple creative pathways.

Takeaway: Intermediate patterns teach you that slight variations in band placement, weaving order, and stacking techniques create dramatically different visual results, expanding your creative possibilities significantly.

Troubleshooting Common Problems and Mistakes

Most Rainbow Loom crafters encounter similar challenges as they develop their skills. One frequent issue is accidentally dropping bands during the weaving process. When bands fall off pegs, the most important thing is to identify which peg they came from. Carefully place them back on the correct peg before continuing. If you've already woven past that point, you may need to unweave a few rows to properly restore the band. Prevention is easier than correction—work slowly and deliberately, especially when starting.

Free Guide to Toyota RAV4 2026 Features →