Learn How to Draw a Basketball Court

Understanding Basketball Court Dimensions and Layout

A regulation basketball court has specific measurements that remain consistent across professional, college, and high school levels. The court measures 94 feet long and 50 feet wide for the NBA and college basketball. High school courts are slightly smaller at 84 feet long and 50 feet wide. These dimensions create the foundation for drawing an accurate court.

Learn About Driving Without a License Laws →

The court divides into two halves at the center line, which runs perpendicular to the sidelines. Each half represents one team's defensive zone. The baselines run along the short ends of the court, while the sidelines run along the long sides. When drawing your court, start by sketching these outer boundaries with a ruler or straightedge to maintain clean, accurate lines.

Within the overall rectangle, several key zones exist. The paint (also called the key or free throw lane) extends from the baseline toward the center of the court. This rectangular area measures 19 feet wide and extends 19 feet from the baseline on an NBA court. The paint narrows at high school level to 12 feet wide. This zone restricts how long defensive players can stand without guarding an offensive player.

The three-point line creates another important boundary on the court. This curved line runs from the baseline and extends outward, marking the distance from which three-point shots are made. The NBA three-point line sits 23 feet, 9 inches from the basket at the center, while college courts use 22 feet, 1 3/4 inches, and high school courts use 19 feet, 9 inches.

Practical Takeaway: Before drawing anything, decide which court level (NBA, college, or high school) you want to represent. Write down the exact measurements for that level and use a scale conversion if drawing on paper. For example, you might use 1 inch of paper to represent 2 feet of actual court.

Drawing the Court Outline and Center Circle

Begin your basketball court drawing by establishing the outer rectangle. Use a ruler and pencil to draw a rectangle with the correct proportions for your chosen court type. If drawing on an 11-by-17-inch piece of paper and using NBA dimensions, you might scale it down so the court measures 8.5 inches by 4.5 inches on your paper. This scale provides enough room for detail without being too large to manage.

Learn About Settlement Filing Steps →

Mark the center point of the court by finding the midpoint of the longer sides. Draw a line connecting these midpoints to create the center line that divides the two halves. This line should run perpendicular to the baselines and create two equal rectangles.

At the center of the court, draw the center circle. This circle has a 6-foot radius on all regulation courts, regardless of level. The center circle marks where the opening tip-off occurs at the start of each half. To draw a perfect circle, use a compass set to the appropriate radius based on your scale. The circle extends toward both baselines, creating a visual anchor point at the court's middle.

Many courts feature a smaller circle within or intersecting the center circle. This inner circle, called the restraining circle, has a 2-foot radius and helps officials manage the tip-off procedure. When drawing, include both circles to create an authentic court representation. The restraining circle sits entirely within the larger center circle.

Practical Takeaway: Use a compass or circular template to draw perfect circles rather than freehanding them. Mark your center point clearly with a small dot before drawing the circles. This ensures both circles share the same center point and appear properly aligned.

Creating the Paint, Free Throw Line, and Key Areas

The paint is the rectangular area where the free throw lane and restricted area are located. Starting from the baseline on each end, draw a rectangle extending 19 feet toward center court (on NBA courts) or 12 feet (on high school courts). The width of the paint varies by level: 19 feet for NBA and college, or 12 feet for high school.

Get Your Free Settlement Information Guide →

Within the paint sits the free throw circle. This circle has a 6-foot radius and is centered on the free throw line. The free throw line runs across the width of the paint, 15 feet from the baseline. The free throw circle extends from the free throw line into the paint and beyond it, creating a perfect circle. The portion of the circle extending outside the paint uses a dashed line to show it doesn't count as part of the lane.

The restricted area appears as a small rectangle beneath the basket. On NBA courts, this rectangle measures 4 feet wide and extends 4 feet from the baseline. This area marks where defensive players cannot draw charges when an offensive player is driving to the basket. Draw this rectangle precisely aligned with the basket, ensuring it sits centered under the hoop.

The paint and free throw circle create the most complex geometric shapes on the court. Take time to measure carefully before drawing these areas. Use a straightedge for the rectangular paint boundary and a compass for the free throw circle. Ensure the free throw circle's center point sits exactly on the free throw line at the midpoint of the paint's width.

Practical Takeaway: Draw the free throw line first at the correct distance from the baseline, then use it as your guide for positioning the center of the free throw circle. This approach prevents measurement errors that could make the circle appear off-center.

Marking the Three-Point Line and Shooting Areas

The three-point line is one of the most recognizable features of a basketball court. This curved line runs from the baseline on both sides of the court and extends outward. The line measures different distances depending on the court level. NBA courts use 23 feet, 9 inches at the center, college uses 22 feet, 1 3/4 inches, and high school uses 19 feet, 9 inches.

Learn About Arizona Divorce Filing Options →

The three-point line creates a distinctive shape. It begins at the baseline on one side of the court, curves outward in an arc, and returns to the baseline on the opposite side. The arc bulges away from the basket, with the furthest point at the center of the court. The straight portions where the line meets the baseline extend perpendicular to the end lines, creating sharp angles rather than curved transitions.

To draw an accurate three-point line, use a compass to draw the curved portion. Set your compass to the correct radius from the basket location and draw the arc. The basket sits 10 feet from the baseline on all courts. For the baseline portion, measure the correct distance from the center point directly under the basket and mark where the arc meets the baseline. Connect these points with straight lines running parallel to the sidelines.

Within the three-point line sits another important shooting area: the restricted zone near the basket. Besides the paint with its free throw circle, the area between the baseline and three-point line represents the area where most close-range shots occur. The block area, marked by small boxes on the sideline of the paint, indicates where players can take charging or blocking positions during specific plays.

Practical Takeaway: Use two different tools for the three-point line: a compass for the curved arc portion and a ruler for the straight baseline portions. This combination creates the proper shape while maintaining accuracy. Mark the basket location clearly before drawing the three-point arc so you can measure from it correctly.

Adding the Basket, Backboard, and Hoop Details

The basket location is positioned 10 feet from the baseline on all regulation courts. Mark this point with precision, as all other court features relate to this position. Use a small circle or dot to indicate where the basket hangs. The basket itself has a diameter of 18 inches, though on a scaled drawing this may appear as just a small circle.

Free Guide to Firearm Registration Laws and Process →

Behind each basket sits the backboard. The backboard measures 10 feet wide and 3.5 feet tall. It sits 4 feet inside the baseline on NBA courts, though college and high school distances may vary slightly. Draw a rectangle representing the backboard's outline. Within this rectangle, many courts show the inbounds line or the area where the backboard sits on the court surface.

The free throw lane extends from the baseline to the free throw line, positioned directly in front of each basket. This is the area where free throw shooters stand during penalty shots. Mark the free throw line clearly, as it serves as a reference point for multiple court features including the free throw circle.

Hash marks and circles around