The Everstart Maxx is a portable battery charger manufactured by Walmart's in-house brand and sold primarily through Walmart stores and online retailers. It's designed as a mid-range charger that sits between basic trickle chargers and high-end professional equipment. Understanding what this specific charger does—and doesn't do—matters before you hook it up to your vehicle.
Learn About Paying Your FGUA Bill Online →
This charger comes in several configurations, but the most common versions are 10-amp and 2-amp models. The 10-amp version is marketed toward faster charging times, while the 2-amp model is better for maintaining battery charge over longer periods or for smaller vehicles. Neither version is industrial-grade equipment, but both handle standard car battery situations you'll encounter at home or in a driveway.
The Everstart Maxx features a basic digital display showing charging status, voltage output, and sometimes amperage settings. Most models include automatic shutoff capabilities, which means the charger reduces or stops power once your battery reaches full charge—a safety feature that prevents overcharging. Some versions also include reverse polarity protection, which stops the charger if you connect the cables backward, protecting both your battery and the charger itself.
One thing to note: Everstart Maxx chargers are not jump starters. They won't provide the instant surge of power a jump starter gives you when your battery is completely dead. Instead, they're designed for charging a battery over 30 minutes to several hours, depending on how depleted your battery is and which model you own.
Practical takeaway: Know which Everstart Maxx model you have before starting. Check your manual or the product label for the amp rating. This determines how long charging will take and what types of batteries it can safely handle.
Before connecting anything to your car battery, you need to take several safety steps. First, turn off your vehicle completely. This means the engine is off, the ignition is off, and no electrical systems are running. Attempting to charge a battery while the engine runs can damage both the charger and your vehicle's electrical system. Wait a few minutes after shutting off the engine to let any residual power dissipate.
Free Guide to Pay by Plate Illinois Billing →
Find your battery in your vehicle. For most cars, it's located under the hood. Open your hood and locate the battery—it's a rectangular plastic case with two thick cables attached: one red (positive) and one black (negative). In some vehicles, you might need to remove a plastic cover to access the battery terminals. Some hybrid vehicles or luxury cars have batteries in different locations, so check your owner's manual if you can't immediately spot the battery under the hood.
Inspect your battery for visible damage before you proceed. Look for cracks in the plastic casing, corrosion (which appears as a white, blue, or green crusty buildup on the terminals), or leaking fluid. If your battery is cracked or leaking, charging it can be dangerous. Corrosion on the terminals is common and manageable—you can clean it off with a wire brush or a mixture of baking soda and water applied with an old toothbrush. Rinse with distilled water afterward and let it dry completely before charging.
Set up your charging location with safety in mind. You'll need access to a power outlet, ideally indoors or in a garage where rain won't interfere with the charger. Keep the charger away from the battery if possible—not right on top of it—to allow for heat dissipation. Make sure the area is well-ventilated. Car batteries release hydrogen gas during charging, and while this is only a concern in very poorly ventilated spaces over extended charging periods, ventilation is still a good practice.
Practical takeaway: Spend five minutes on preparation. Kill the engine, find and inspect your battery, clean corrosion if present, and set up your outlet access. Skipping this step is where most people create problems for themselves.
Your Everstart Maxx charger comes with two cables: a red cable with a red clamp and a black cable with a black clamp. These colors are standardized across the automotive world and matter significantly. The red cable connects to the positive (+) terminal of your battery, and the black cable connects to the negative (−) terminal. Reversing these connections is the most common mistake people make, and it's why many Everstart models include reverse polarity protection.
Free Guide to Mold Removal Methods for Walls →
Before you touch anything, make sure both cables are completely unplugged from the charger unit itself. This is a critical safety step that people often skip. Connecting cables to a plugged-in charger introduces unnecessary risk. Unplug the charger from the wall outlet, then lay out both cables where you can work with them comfortably.
Locate the positive terminal on your battery first. This terminal is marked with a "+" symbol and is typically covered with a red plastic cap or tab. Remove this cap if it's present. The terminal itself is a thick post (usually about the diameter of your thumb) that the red clamp will attach to. If your battery has corrosion around the terminals, clean it off now before attempting to attach the clamps.
Attach the red clamp to the positive terminal by loosening the clamp's screw, sliding it over the post, and tightening the screw firmly. The clamp should grip the terminal tightly enough that it doesn't wiggle or shift. A loose connection means poor charging and potential sparking. After securing the red clamp, move to the negative terminal, which is marked with a "−" symbol and often has a black plastic cap. Repeat the same process: loosen the screw, slide the black clamp over the terminal, and tighten firmly.
Some people recommend attaching the red clamp first to the battery's positive terminal, then taking the black clamp and attaching it not directly to your battery's negative terminal, but instead to an unpainted metal surface on your engine block or frame. This practice, called grounding elsewhere on the vehicle, reduces the risk of sparks near the battery itself. Whether you do this depends on your comfort level, but either method works with the Everstart Maxx.
Practical takeaway: Red goes to positive, black goes to negative. Tighten both clamps securely. If you're unsure which terminal is which, your vehicle's owner's manual shows the battery layout. A loose connection is your enemy here.
Once both clamps are securely attached to the battery terminals, you're ready to plug in your Everstart Maxx. Take the charger unit itself, check that the voltage selector (if your model has one) is set to 12V—most standard cars use 12-volt batteries, though some older or specialty vehicles use 6V—and plug the charger into a standard wall outlet. Most Everstart models default to 12V, but confirm this before plugging in.
How to Delete Your Fitbit Account Guide →
When you first plug in the charger, the digital display should activate. You may see indicator lights that show the charging status. Some models display the current voltage of your battery in real time, which gives you useful information about how depleted your battery actually was. A fully charged car battery reads around 12.6 volts. If your battery is reading 11 volts or lower, it's significantly discharged and will take longer to charge.
Look for amp selector switches on your charger. The 10-amp setting charges faster but produces more heat. The 2-amp setting charges slower but is gentler on older batteries or smaller batteries. For a standard car battery that's moderately discharged, the 10-amp setting typically takes 4 to 8 hours to reach full charge. The 2-amp setting might take 12 to 24 hours. If your battery is completely dead or very old, using the 2-amp setting is often safer because it reduces stress on the battery's internal chemistry.
Some Everstart Maxx models include a "maintenance" or "trickle" mode. This mode delivers a very small charge and is designed for situations where you want to keep a battery charged over days or weeks—like during winter storage of a seasonal vehicle or when charging a rarely-used backup car. If your charger has this mode, avoid it for your initial charge. Use it only after your battery reaches full charge if you plan to leave the charger connected
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.