Your car's clock loses time more often than you might realize. Most vehicles lose between 15 seconds and several minutes per month, depending on the make and model. This happens because car clocks operate on quartz oscillators that gradually fall out of sync—it's not a sign of a broken clock, just normal wear. Some drivers notice their clock jumps ahead after a battery disconnect or a long period without driving, while others find it slowly creeps backward over weeks.
Learn About Paying Your FGUA Bill Online →
Understanding why this occurs matters because it affects how you approach resetting it. Unlike smartphone clocks that sync to cellular networks, car clocks rely on manual adjustment or, in modern vehicles, automatic updates from satellite signals or connected systems. The drift isn't usually a sign of electrical failure—it's simply how analog and digital car clocks work over time. Temperature changes in your vehicle can also speed up or slow down the quartz mechanism, which is why you might notice bigger time shifts during seasonal transitions or after particularly hot or cold days.
Different vehicle types experience different drift patterns. Luxury vehicles with atomic-clock-style systems may drift less frequently, while older vehicles with mechanical clock movements may need adjustment every few weeks. New cars with infotainment systems connected to GPS or cellular networks often self-correct without any action on your part. Knowing which category your vehicle falls into helps you understand whether you're dealing with normal drift or an actual malfunction that requires professional inspection.
Practical takeaway: If your car clock loses or gains time gradually, this is typically normal behavior. If it jumps suddenly or stops working entirely, that suggests a different issue worth investigating.
Car clocks sit in different locations depending on when your vehicle was manufactured and what type of dashboard system it has. In vehicles made before 2010, the clock typically appears in an analog display on the main dashboard, usually to the right of the steering wheel or in the center above the radio. These older clocks often have small buttons located directly on or just below the clock face itself—sometimes labeled with symbols like a plus (+) and minus (−) sign, or marked with arrows pointing up and down.
Free Guide to Pay by Plate Illinois Billing →
Modern vehicles with digital displays usually integrate the clock into the infotainment touchscreen or a digital readout at the top of the center console. In these vehicles, you won't find physical buttons near the clock. Instead, you'll access time settings through an onscreen menu, often found under "Settings," "System Settings," "Time," or "Clock." Some manufacturers bury this option deeper—you might need to navigate through "Vehicle Settings" or "Preferences" first. The exact path varies significantly between Ford, Toyota, Honda, Chevrolet, BMW, and other brands, so checking your owner's manual or infotainment system's help menu can save you time.
Hybrid situations exist in vehicles from roughly 2008 to 2015. These cars might have a physical clock on the dashboard that you adjust manually, but the controls could be hidden behind the steering wheel on stalks, located on the instrument cluster, or controlled through a basic digital menu on a smaller screen. Steering wheel stalks sometimes control multiple functions—volume, radio tuning, and occasionally time adjustment. If your vehicle has these stalks, check both the left and right sides, and look for any labeling that suggests time or menu controls.
A practical method for locating controls: Start by examining the area directly around your clock face. Look for small buttons, indentations, or labeled controls. If you find nothing, check your steering wheel stalks next, then consult the instrument cluster menu. Finally, if your vehicle has a touchscreen, explore the settings menus systematically. Most infotainment systems show "Settings" or a gear icon on the main screen.
Practical takeaway: Your owner's manual contains a diagram showing exactly where clock controls are located for your specific model. Keeping this resource in your vehicle or bookmarking the digital version online saves troubleshooting time.
If your vehicle has a traditional clock with physical controls, the adjustment process is straightforward once you identify the buttons. Most vehicles use a hold-and-press method rather than repeated clicking. Locate the small buttons near your clock—these are typically recessed slightly into the dashboard so they don't get pressed accidentally. You'll see markings indicating which button increases the hour, which increases the minutes, and sometimes a separate button for AM/PM on 12-hour clocks.
Free Guide to Mold Removal Methods for Walls →
The standard procedure works like this: Press and hold the hour button (usually marked with an up arrow or plus sign) until the hour display reaches your desired hour. The display will cycle through all 24 hours if you hold it long enough, so you can overshoot and circle back around, or release once you reach the correct time. Next, press and hold the minute button until the minutes align with the current time. On some vehicles, you'll press minute buttons in 15-minute increments; on others, they increment by 1 minute per press. If your clock displays seconds, a third button typically controls those. Some older vehicles require you to press an "AM/PM" or "Set" button to confirm changes before they take effect.
Common mistakes people make include: pressing too quickly and overshooting the time, not holding the button long enough to see the display update, or assuming the clock uses 24-hour format when it actually uses 12-hour format (or vice versa). If you notice your clock jumping backward or skipping numbers during adjustment, you've likely found a button that was slightly stuck—press it more deliberately or wait a moment and try again. Some vehicles require you to turn on the ignition or place the vehicle in a specific mode before the clock becomes adjustable; if nothing happens when you press buttons, check whether you need to start the engine first.
For vehicles with steering wheel stalks that control time, the process differs slightly. You'll typically need to enter a menu mode first by pressing a dedicated button or combination of buttons on the steering wheel. Once in the time adjustment menu (which appears on your instrument cluster display), use the stalk to navigate to "Time" or "Clock" and then adjust hours and minutes using the same stalk movements or separate buttons on the opposite side of the wheel.
Practical takeaway: Keep your owner's manual accessible the first time you adjust your clock. Once you've done it once, the procedure becomes automatic, and future adjustments take less than a minute.
Vehicles with touchscreen infotainment systems require a different approach because you're working through menus rather than direct physical controls. The first step is turning on your vehicle and allowing the infotainment system to fully load—this typically takes 5 to 15 seconds after you press the start button. Once the main screen displays, look for a "Settings" option, which usually appears as a gear icon or labeled text menu. Tap this to enter the settings area.
How to Delete Your Fitbit Account Guide →
Once inside Settings, you'll see various categories. Look for options labeled "Time," "Date and Time," "Clock Settings," "System Settings," or sometimes "Vehicle Settings." Different manufacturers organize these differently: some put time settings under "System," while others have a dedicated "Clock" section. If you can't find it in the obvious places, scroll down through the available options—many systems don't show all options on the first screen. Some vehicles also hide time settings under "Display" or "Preferences." If your vehicle has multiple user profiles, you might need to select the correct profile before time adjustments appear.
Once you locate the time settings, you'll typically see options to adjust the hour and minute separately. On most systems, you'll tap on the hour field, and either a number pad appears on the screen, or up/down arrows let you increment the hours. Do the same for minutes. Some vehicles allow you to toggle between 12-hour and 24-hour format on this same screen. After making your changes, look for a "Save," "Confirm," or "OK" button to lock in your adjustment. If you exit without confirming, your changes may not stick.
Some modern vehicles also offer automatic time zone adjustment, which you can enable or disable depending on whether you travel frequently. This feature connects to your vehicle's GPS or cellular data to update the clock automatically when you cross time zones. If your car frequently displays the wrong time or you travel often, enabling this feature eliminates the need for manual adjustment. However, if you prefer to control the time manually, you can disable it and adjust the clock yourself whenever needed.
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.