Learn How to Adjust Your Compound Bow Draw Weight

Understanding Compound Bow Draw Weight Basics

Draw weight refers to the amount of force, measured in pounds, required to pull a compound bow's string back to its full draw length. This measurement is one of the most important specifications for any archer to understand. Most compound bows manufactured today have draw weights ranging from 40 to 80 pounds, though some specialty bows may fall outside this range. The draw weight directly affects how much physical strength you need to operate the bow, the speed at which arrows travel, and the kinetic energy delivered to a target.

Understanding Loose Bowel Movements and Digestive Health →

The reason draw weight matters goes beyond just physical capability. A bow that's too heavy for your strength creates poor shooting form because you'll struggle to pull the string back smoothly and hold it at full draw. This leads to inconsistent arrow placement and potential injury from muscle strain. Conversely, a bow that's too light may not deliver enough energy to effectively hunt certain game animals or penetrate competition targets reliably. Finding the right draw weight for your body type, experience level, and intended use is fundamental to becoming an accurate, safe archer.

Compound bows differ from traditional recurve bows because of their mechanical advantage system. The pulley system at the limb tips creates what's called a "let-off," which reduces the force required to hold the bow at full draw. For example, an 80-pound draw weight bow with 65% let-off only requires you to hold back about 28 pounds once fully drawn. This makes it possible for people of varying strengths to shoot heavier bows, though the initial pull to get to full draw remains at the full draw weight specification.

When you're considering adjustment or purchasing a bow, knowing the current draw weight and understanding what range works for you is essential. Most compound bows can be adjusted within a range—typically 10 to 15 pounds—without tools or replacement parts. This built-in adjustment capability exists specifically to allow archers to fine-tune their equipment as their strength develops or circumstances change.

Practical Takeaway: Before adjusting your bow, write down its current draw weight by checking the manufacturer's specifications on the limbs or the original documentation. Understand that draw weight directly impacts both your ability to shoot accurately and the bow's performance. The right draw weight for you should be one you can draw smoothly without excessive strain while maintaining good shooting form.

Measuring Your Current Draw Weight

Determining your bow's exact current draw weight is the first step in making any adjustments. While many bows have the draw weight printed on the limbs near the top or bottom, this marking represents the factory setting, not necessarily what your bow is currently set to if previous adjustments were made. To measure draw weight accurately, you'll need a draw weight scale, also called a bow scale or force gauge. These devices measure the actual resistance as you pull the string back through its full range of motion.

Learn About Tracking Your IRS Tax Payments Online →

Draw weight scales are relatively inexpensive tools, typically ranging from $30 to $150 depending on quality and features. A basic bow scale has a hook that attaches to your string and a measurement dial or digital readout that shows force in pounds. To use one, attach the scale to your bowstring at the nocking point, then pull back smoothly while noting the peak reading. Most archers take three measurements and average them to account for slight variations. This gives you the actual draw weight your bow is currently producing.

You can also measure draw weight through a different method if you don't have a scale available. Some archery shops offer this service, charging a small fee of $10 to $25. They'll use professional equipment to determine your bow's exact specifications. This is helpful if you're uncertain about your equipment or preparing for competition where precise measurements matter. Additionally, some community recreation centers with archery programs may have equipment available for members.

Understanding the relationship between draw weight and draw length is also important. Draw length is the distance from the bowstring to the pivot point of the bow's grip, measured when the bow is at full draw. Draw length and draw weight are independent specifications—changing draw length doesn't directly change draw weight, though adjusting certain cam systems might affect both slightly. Most archers have a draw length between 26 and 31 inches, determined by body measurements and shooting form.

Another consideration when measuring is understanding the draw weight range your specific bow model supports. This information appears in the owner's manual or on the manufacturer's website. For example, a bow might be rated for adjustment between 50 and 70 pounds, meaning you can modify it within that 20-pound range but not beyond. Attempting to adjust outside this range risks damaging the limbs and invalidating your warranty.

Practical Takeaway: Measure your bow's current draw weight with a bow scale or visit an archery shop for professional measurement. Record this number along with your bow's model and serial number for future reference. Knowing exactly where you're starting allows you to make informed decisions about whether adjustment is necessary or beneficial.

Tools and Equipment You'll Need

Adjusting compound bow draw weight requires specific tools designed for this purpose. The primary tool you'll need is an Allen wrench or hex key set, which comes in various sizes. Most compound bows use either 3/32-inch or 1/8-inch Allen wrenches to access the adjustment bolts on the limbs. Check your bow's manual to identify which size applies to your model. A quality metric and standard Allen wrench set from any hardware store costs $15 to $40 and provides tools for many future projects.

Get Your Free Cookbook Creation Guide →

Beyond the Allen wrench, you'll need a torque wrench if you want to make adjustments following manufacturer specifications precisely. A torque wrench is an adjustable wrench that tightens bolts to a specific force measurement, typically specified in foot-pounds. This prevents over-tightening, which can crack limbs, or under-tightening, which creates safety hazards. Torque wrenches range from $25 for basic models to over $100 for professional-grade versions. Many archery shops have torque wrenches and will use them during adjustments.

You'll also benefit from having a bow press available, though this isn't always essential for draw weight adjustment alone. A bow press is a mechanical or pneumatic device that holds the bow in a safe position while the limbs are under tension, allowing you to work on various components. Bow presses range from around $300 for mechanical models to over $1,000 for pneumatic systems. Many archery shops and pro shops have presses and charge $15 to $40 for press time if you need to use their equipment.

Safety equipment should be part of your tool collection as well. Safety glasses protect your eyes from potential spring or screw ejection if something goes wrong. A bow holder or shooting stand helps stabilize the bow during adjustment so you can work with both hands. Having adequate lighting and a clean work surface prevents lost screws and ensures you can see small components clearly. These items are inexpensive and fundamental to safe, accurate work.

Documentation is equally important as physical tools. Keep your bow's manual, warranty information, and any specification sheets nearby during adjustment. Take photographs of your bow before making changes so you can reference the original configuration if something doesn't seem right. Write down measurements and changes as you make them rather than relying on memory. This documentation becomes valuable if you need to troubleshoot issues or return to original settings later.

Practical Takeaway: Gather the necessary tools—primarily an appropriate Allen wrench set and a torque wrench—before starting any adjustments. If you lack a torque wrench or bow press, visiting a professional archery shop represents a wise investment in safety and accuracy. Having proper tools prevents damage and ensures your adjustments are safe and effective.

Step-by-Step Adjustment Process

The adjustment process begins with a secure setup. Place your bow in a bow holder or secure it against a table so it cannot move during work. Ensure you have adequate lighting and all tools within reach. Never attempt to adjust a bow held in your hands or held by another person—the limbs are under significant tension and can cause injury if something slips. Remove any broadheads or hunting points from arrows; use only field points for test shooting. Take a photograph of the current state before making any changes.

Learn About Contacting SSA for Disability Questions →

Most compound bows adjust through limb bolts located at the top and bottom of each limb. These bolts run through the limbs into the riser (the central handle section). Turning the bolt clockwise increases draw weight by tightening the limbs, while turning it counterclockwise decreases draw weight by loosening them. However, there's a critical rule