Illinois Tollway's Pay By Plate system represents a shift from the traditional approach to toll collection that most drivers in the state have grown accustomed to. Instead of requiring a physical transponder device mounted on your windshield, Pay By Plate uses camera technology to photograph your vehicle's license plate as you pass through a toll plaza. The system then matches that plate information to billing records and sends an invoice to the registered vehicle owner.
Learn About Paying Your FGUA Bill Online →
The traditional method—using an I-PASS transponder or similar device—has been the standard since the 1990s. Those small plastic boxes communicate with roadside sensors to deduct toll amounts from a prepaid account. Many drivers still use them because they offer discounted rates compared to paying at toll booths or through other methods. However, Pay By Plate operates entirely without this equipment, which means you can use Illinois toll roads whether or not you have a transponder mounted on your vehicle.
This distinction matters practically because it removes a barrier to entry. You don't need to obtain a device in advance, maintain a prepaid balance, or worry about your transponder malfunctioning. The system photographs license plates and bills you later based on your vehicle registration. For occasional toll road users, this represents a significant operational difference from transponder-based systems that require setup and ongoing account management.
Pay By Plate operates on both open roads and in toll plazas across the Illinois Tollway system, which includes the Chicago area tollway network. The system has become increasingly relevant as the Illinois Tollway expanded its use of all-electronic toll collection, particularly after the 2020 conversion of traditional toll booths to camera-based systems on many segments.
Practical takeaway: Understand that Pay By Plate is a camera-based toll payment method that doesn't require purchasing or mounting equipment, making it fundamentally different from transponder systems in how collection occurs and how billing reaches the vehicle owner.
When you drive through a toll point on the Illinois Tollway equipped with Pay By Plate technology, a high-resolution camera captures an image of your vehicle's license plate. This happens at virtually every toll collection point on the system. The camera technology is designed to work in various lighting and weather conditions, capturing clear plate images whether you're driving during daylight, at night, or in rain.
Free Guide to Pay by Plate Illinois Billing →
After the camera captures your plate image, the Illinois Tollway's computer system processes that image. The system extracts the license plate number and matches it against the vehicle registration database through the Illinois Secretary of State records. This cross-referencing identifies the registered owner of the vehicle. The entire process happens automatically without requiring any action on your part at the toll point—you simply drive through.
Once the vehicle owner is identified, the Illinois Tollway determines the appropriate toll amount based on several factors: the specific toll segment you traveled, your vehicle classification (passenger car, motorcycle, truck, etc.), and whether you have an active I-PASS account with available discounts. The system then generates an invoice and sends it to the address associated with your vehicle registration. This invoice typically arrives within 7-14 days of your toll transaction, depending on mail processing times.
If you have an I-PASS account set up, the system may automatically deduct the toll from that account instead of sending a separate invoice. This is an important detail: Pay By Plate and I-PASS can work together. If your transponder fails or you're in a vehicle without one, Pay By Plate acts as a backup collection method. However, if you don't have I-PASS and don't pay the invoice that arrives, penalties and late fees accumulate, which is why understanding this billing chain matters.
The camera system uses optical character recognition (OCR) technology to read plate numbers. While this technology is highly reliable, occasionally it misreads a plate or captures an unclear image. In those rare instances, the Illinois Tollway has procedures to flag problematic images and attempt re-identification or contact the vehicle owner through other means.
Practical takeaway: Know that your license plate is photographed, matched to your vehicle registration, and an invoice is mailed to you—understanding this three-step process helps you anticipate when invoices arrive and why accurate registration information matters.
Toll rates on the Illinois Tollway vary significantly depending on your vehicle type and whether you're using I-PASS or paying through Pay By Plate. For a standard passenger vehicle using Pay By Plate (meaning no transponder), rates typically range from about $0.70 to $1.80 per segment on the mainline tolls, with variation across different sections of the tollway network. These are higher than I-PASS rates, which might be $0.50 to $1.20 for the same route.
Free Guide to Mold Removal Methods for Walls →
The rate structure is based on toll segments—the distance between one toll collection point and the next. Shorter segments cost less; longer segments cost more. For example, traveling from one exit to an immediately adjacent exit might cost around $0.70 with Pay By Plate, while traveling across several segments might accumulate to $3.00 or $4.00. This segmented approach means your total toll cost depends on exactly where you enter and exit the tollway.
Commercial vehicles and trucks face substantially higher rates. A typical commercial vehicle might pay two to three times what a passenger vehicle pays for the same route. The Illinois Tollway classifies vehicles into categories based on the number of axles and overall size. If your vehicle is misclassified in the camera system, you might be charged incorrectly, which is why reviewing your invoices against your actual vehicle type matters.
There are scenarios where you might receive discounted rates even without actively having an I-PASS account. If you have a valid I-PASS account and sufficient funds, the system will apply I-PASS rates to your Pay By Plate transactions automatically. Some special discount programs also exist for certain vehicle types or frequent users, though these typically require registering an account.
Monthly tolls for regular commuters can accumulate quickly. A driver making 20 toll transactions per month on Pay By Plate might spend $25-$40 monthly depending on routes, whereas the same commute on I-PASS could cost $15-$25. Over a year, this difference reaches several hundred dollars, which explains why frequent users often transition to I-PASS accounts despite the slight inconvenience of maintaining them.
Practical takeaway: Pay By Plate rates are higher than I-PASS rates, and your total cost depends on segments traveled and vehicle classification—reviewing invoices helps you understand your actual toll expenses and identify if you should consider switching to I-PASS for frequent use.
Your interaction with the Pay By Plate system begins before you ever reach the toll collection point. You're simply driving on the Illinois Tollway like you normally would. As you approach a toll gantry—the overhead structure where tolls are collected—you may notice overhead lanes marked for different payment methods. Many newer gantries have lanes designated for I-PASS only, Pay By Plate lanes, or mixed-use lanes that accept both systems.
How to Delete Your Fitbit Account Guide →
If you're using Pay By Plate, you can drive through essentially any lane without slowing down. Unlike older toll booth systems where you'd stop and hand over money, Pay By Plate operates entirely while you maintain normal highway speed. This all-electronic collection means you don't brake, don't open your window, and don't hand anything to an attendant. The camera captures your plate automatically as you pass underneath the gantry.
The actual capture takes a fraction of a second. The high-resolution camera positioned on the toll gantry photographs your license plate from multiple angles to maximize the chance of capturing a clear, readable image. Night tolling works the same way—infrared or specialized lighting illuminates the plate area so the camera can capture usable images even in darkness.
Immediately after the photograph is taken, the toll amount is calculated by the computer system based on your entry and exit points and vehicle type. Within seconds, the transaction is recorded in the Illinois Tollway database. From the driver's perspective, nothing happens—you simply continue driving. There's no beep, no light, no confirmation that anything occurred.
The next visible step happens days or weeks later when your invoice arrives in the mail. You'll receive a statement showing the
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.