Hand signals are the backup communication system that every driver should understand. While modern vehicles have turn signals, brake lights, and hazard flashers, there are moments when these electronic systems fail or when other drivers simply don't notice them. Hand signals bridge that gap—they're a direct, visible way to tell other people on the road what you're about to do. This matters not just for your safety, but for the safety of cyclists, pedestrians, and drivers around you.
Learn About Paying Your FGUA Bill Online →
Most people associate hand signals with bicycles, but they're equally important for drivers. State DMV tests include hand signal questions because regulators recognize that understanding these signals prevents confusion and accidents. When a brake light burns out, a hand signal communicates your intention to stop. When you're turning in heavy traffic or at an intersection where visibility is poor, a hand signal reinforces what your turn signal already shows.
Hand signals also matter internationally. If you travel to countries with different traffic conventions or rent a vehicle in an unfamiliar place, knowing the universal hand signal system helps you communicate intent across language barriers. A raised hand universally means "I'm stopping." A left arm extended and curved upward means "I'm turning right"—and that works whether you're driving in Europe, Asia, or North America.
The DMV includes hand signals on written tests and often references them during road tests because they demonstrate that a driver understands traffic communication principles, not just how to operate a vehicle. A driver who knows hand signals shows they're thinking about how their actions affect others on the road.
Takeaway: Hand signals are a legal communication tool required in most states and tested on DMV exams. Learning them shows you understand that driving involves constant communication with other road users.
The three fundamental hand signals form the foundation of road communication. These are standardized across the United States and most countries, which means once you learn them, you'll recognize them no matter where you encounter them. The DMV tests these three signals above all others because they cover the essential actions: changing direction left, changing direction right, and slowing down or stopping.
Free Guide to Pay by Plate Illinois Billing →
Left Turn Signal: Extend your left arm straight out the window at shoulder height, keeping your arm fully extended and parallel to the ground. Your palm can face down or be open. This signal tells drivers, cyclists, and pedestrians that you intend to turn left. Hold this position until you complete the turn or until other drivers acknowledge they've seen it. In practice, you'd use this if your left turn signal is broken, but you'd hold it until your vehicle is actually beginning the turn—not minutes in advance. The signal works best at intersections where you're either slowing down or stopped, because a moving vehicle with an arm hanging out the window is harder for others to track.
Right Turn Signal: Bend your left arm upward at the elbow so your forearm points up, with your hand open and palm facing forward. Some drivers bend at the elbow so their forearm is nearly vertical; others angle it slightly. The key is that your arm is clearly raised and bent, which differentiates it from the left turn signal. This signal means you're turning right. Use it in the same situations as the left turn signal—when your turn signal isn't working or to reinforce your intention at complex intersections. The upward position is chosen specifically because it's distinct from the left signal and visible from behind your vehicle.
Stopping Signal: Extend your left arm out the window with your elbow bent 90 degrees, so your forearm points downward with your palm facing backward. Some drivers snap their hand down and up repeatedly to make it more noticeable. This signal means you're braking or stopping. Use this when your brake lights aren't working or to warn drivers behind you that you're stopping suddenly. The downward motion makes sense biomechanically—it mirrors the action of applying brakes—and it's distinctly different from turn signals, so there's no confusion about your intent.
Each signal uses different arm positions specifically to prevent confusion. A person watching you should never wonder whether you meant left, right, or stop. The signals are exaggerated enough to be unmistakable even from a distance or in poor visibility.
Takeaway: Practice these three signals until the motions become automatic. You need to understand not just how to make them, but when and how long to hold them, and why each signal's position is distinct from the others.
Knowing how to make a hand signal is only half the skill; knowing when to use one is the other half. The DMV tests this distinction because context determines whether a hand signal is legally required, strongly recommended, or unnecessary.
Free Guide to Mold Removal Methods for Walls →
Equipment Failure: This is the most clear-cut scenario. If your turn signal, brake lights, or both aren't working, hand signals become your legal communication tool. You can't legally operate a vehicle with broken brake lights in most states, but if lights fail during operation, you're expected to use hand signals to compensate. Some states actually require drivers to use hand signals if their electronic signals aren't functioning. This is why test questions sometimes ask: "Your brake lights are broken. What should you do?" The answer involves using hand signals along with getting the vehicle repaired.
Low-Speed Maneuvers in Congested Areas: In parking lots, at very slow speeds, or during heavy traffic, hand signals make your intentions clearer than electronic signals alone. A driver leaving a parking space might use a hand signal to reinforce their left turn signal because nearby pedestrians and other cars might not notice a turn signal from certain angles. Heavy traffic at an intersection—where multiple vehicles are turning—is another scenario where hand signals add clarity.
Bicycle and Motorcycle Awareness: Cyclists use hand signals because they have no electronic options. When a driver uses the same hand signals, they demonstrate they're aware of and communicating with cyclists. This matters in urban areas and is often covered on the DMV test: "You're turning left at an intersection with bicycle lanes. What should you do?" The answer includes using your turn signal and being aware that cyclists will use their own hand signals.
Situations Where Hand Signals Are NOT Necessary: If your electronic signals are working properly, hand signals are supplementary, not required. You shouldn't hang your arm out the window as a primary communication method on expressways or high-speed roads. The priority is keeping both hands on the wheel and your eyes on the road.
Takeaway: Use hand signals to reinforce electronic signals in congested situations, to compensate for broken lights, and to show awareness of cyclists. They're not a replacement for proper vehicle maintenance, but they're a backup system you need to know how to deploy.
The DMV written test typically includes 1–3 questions specifically about hand signals, though the topic touches on broader subjects like "communication with other road users." The questions generally fall into three categories: identifying which hand signal matches a description, explaining when to use hand signals, and recognizing hand signals made by other drivers or cyclists.
How to Delete Your Fitbit Account Guide →
Written Test Questions: A typical question might show an image of a driver with their arm positioned a certain way and ask "What is this driver signaling?" You'll see four answer choices: left turn, right turn, stop, or slowdown. Another common format: "Your left turn signal isn't working. What should you do?" The answer would involve both using a hand signal and getting the light repaired. A third type presents a scenario: "You're in an intersection and you see a cyclist with their left arm extended. What does this mean?" This tests whether you recognize that cyclists use the same signals as drivers.
Road Test Observations: During a driving test with an examiner, the examiner may note whether you're aware of hand signals made by cyclists or other road users. If a cyclist ahead of you signals a left turn using a hand signal, a competent driver recognizes this and adjusts accordingly. Some examiners specifically ask test-takers to demonstrate hand signals: "Show me how you would signal a left turn." You'd extend your left arm out the window. This tests not just knowledge but also whether you can execute the signal while seated in a vehicle—some people struggle with the right-turn signal angle, for instance.
Common Mistakes on Tests: Test-takers often
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.