Learn About Tire Numbers and Codes

Understanding Tire Size Codes

Tire size codes appear on the sidewall of every tire and contain a series of numbers and letters that tell you specific measurements and specifications about that tire. Learning to read these codes helps you understand what tire you have and whether it matches your vehicle's requirements. The most common format looks something like "P215/65R15 95H," which contains multiple pieces of information packed into a small space.

Get Your Free Guide to Comenity Credit Card Payments →

The first letter or letters indicate the tire type. The "P" stands for "passenger," which means the tire is designed for regular cars and light trucks. Other letters you might see include "LT" for light truck, "T" for temporary (spare tire), and "ST" for special trailer use. Some tires have no letter at all, which typically means they are European metric tires designed for European vehicles.

The first set of numbers (like the "215" in our example) represents the tire width in millimeters. This measurement goes from the inner sidewall to the outer sidewall of the tire when it is mounted on a rim. In this case, the tire is 215 millimeters wide, which is roughly 8.5 inches. Width affects how the tire grips the road and how much of the tire makes contact with the pavement.

The next number (the "65" in our example) is called the aspect ratio or sidewall height ratio. This number represents the sidewall height as a percentage of the tire's width. So if the tire is 215 millimeters wide and the aspect ratio is 65, the sidewall height would be about 140 millimeters (215 × 0.65). A higher aspect ratio means a taller sidewall, which generally provides a softer, more comfortable ride but may reduce handling performance.

Understanding these first measurements matters because using the wrong tire width or aspect ratio can affect how your vehicle handles, how much fuel it uses, and how quickly the tire wears out. Your vehicle's owner's manual lists the correct tire sizes for your specific model and year.

Practical Takeaway: Before buying replacement tires, check your vehicle's owner's manual or look at the tire placard on the driver's side door jamb to find the correct tire size code for your vehicle. Write down this information so you can compare it with tires you are considering.

Decoding the Tire Construction and Diameter

The letter that comes after the aspect ratio indicates the tire's internal construction. This letter is one of the most important characters on the tire code because it describes how the tire is built inside. The two main construction types are radial and bias-ply, and they affect how the tire performs on the road.

Your Free Guide to Disabled Access Vehicles for Sale →

The letter "R" stands for radial tire construction, which is by far the most common type on modern vehicles. In a radial tire, the internal cord plies run straight across from one bead to the other (the bead is where the tire attaches to the rim). This construction allows the sidewalls to flex independently from the tread, which improves ride comfort and fuel efficiency. Radial tires also tend to last longer and provide better traction than older tire designs.

If you see the letter "B" on a tire code, this indicates bias-ply construction, which is an older design rarely seen on new vehicles today. In bias-ply tires, the cord plies run diagonally from one bead to the other, crisscrossing at angles. This construction makes the sidewall stiffer and the tire more rigid overall. Bias-ply tires generate more heat and wear out faster, which is why they have largely been replaced by radial tires for passenger vehicles.

The last number in the tire size code represents the rim diameter in inches. In our example "P215/65R15," the "15" means the tire is designed to fit on a 15-inch diameter wheel rim. Common rim sizes range from 13 inches to 22 inches or larger for different vehicle types. Using the wrong rim diameter will prevent the tire from fitting properly on your wheel.

The combination of width, aspect ratio, construction type, and diameter must all match your vehicle's specifications. A tire might be the correct width but the wrong diameter, or the right diameter but the wrong construction type, and it still would not be suitable for your vehicle. This is why checking multiple parts of the code matters.

Practical Takeaway: When you see a tire code like "P215/65R15," break it down into sections: the letter at the start tells you the tire type, the first numbers are the width, the second numbers are the aspect ratio, the letter in the middle tells you the construction, and the final numbers are the wheel diameter. Practice identifying each section on your own tires.

Reading Load Index and Speed Rating

After the rim diameter in the tire code, you will see additional numbers and letters that indicate how much weight the tire can carry and how fast it is rated to go. These codes matter because using tires with insufficient load capacity or speed rating can be unsafe and may damage your tires.

Get Your Free Brake Pad Installation Cost Guide →

The load index is a two or three-digit number that follows the rim diameter. In our example "P215/65R15 95H," the "95" is the load index. This number corresponds to a specific weight capacity listed in an industry standard chart. A load index of 95 means the tire can safely carry 1,521 pounds when properly inflated. Every five-point increase in load index roughly doubles the weight capacity. For example, a tire with a load index of 100 can carry 2,205 pounds, which is significantly more than a tire rated at 95.

The load index becomes especially important if you drive a truck or SUV, or if you regularly carry heavy cargo or passengers. The tire placard on your vehicle's door jamb will specify the recommended load index for your tires. Using tires with a lower load index than recommended can cause the tires to overheat and fail, while using tires with a higher load index is generally safe and may be beneficial.

The letter that follows the load index is the speed rating, which indicates the maximum speed at which the tire is rated to perform safely under ideal conditions. In our example, the "H" represents a speed rating of 130 miles per hour. Speed ratings range from "A" (the slowest) up to "Y" (the fastest). Common speed ratings include "S" (112 mph), "T" (118 mph), "H" (130 mph), "V" (149 mph), "W" (168 mph), and "Y" (186+ mph).

Speed ratings do not mean you should drive at those speeds; rather, they indicate the tire's engineering level and capability. A tire rated "H" is built differently than a tire rated "S," with firmer compounds and different internal structures. Your vehicle's door placard or owner's manual will tell you the minimum speed rating required for your vehicle. Most modern passenger cars require at least an "H" rating, while some high-performance vehicles require "V," "W," or "Y" ratings.

Practical Takeaway: Always match the load index and speed rating of your replacement tires to the specifications on your vehicle's door jamb or owner's manual. Do not install tires with a lower load index or speed rating than recommended, as this can compromise safety and tire longevity.

Decoding Manufacturing Date and Tire Identification

Beyond the basic tire size and performance codes, the tire sidewall also contains a Tire Identification Number (TIN), which is a unique code assigned to each tire. This code can help you determine when a tire was manufactured and provides information for recalls or quality tracking. The TIN typically appears on the sidewall near the wheel and consists of up to 12 characters.

Learn About Checking Your Visa Card Balance →

The most useful part of the TIN is the manufacturing date, which appears as the last four digits of the code. These four digits are arranged as a week number followed by a year number. For example, if the last four digits are "2518," this means the tire was manufactured in the 25th week of 2018. To find the exact date, you can count forward from January 1st or use a week number chart. The 25th week of the year typically falls in June.

The manufacturing date becomes important when purchasing used tires or when tires are in storage. Tires are made of rubber, which degrades over time even if the tire has never been used. Most tire experts recommend not using tires that are more than 6-10 years old,