A skylight is a window installed in a roof or ceiling that brings natural light into interior spaces. Unlike regular windows on walls, skylights capture sunlight from above and channel it downward into rooms below. Most skylights are rectangular or square, though curved and tubular designs exist as well. The basic structure consists of a frame, glass or plastic panes, and flashing—the metal trim that seals the skylight where it meets the roof.
Learn About Paying Your FGUA Bill Online →
People choose to install skylights for several reasons. The most obvious is daylighting—the ability to reduce reliance on electric lighting during daylight hours, which can lower utility bills. Homes with limited wall space for windows, such as those surrounded by tall trees or neighboring structures, often benefit from skylights. They also add visual interest to interior spaces and can make rooms feel larger and more open. Some homeowners install skylights to brighten kitchens, bathrooms, home offices, or interior hallways that lack access to exterior walls.
The financial picture around skylights involves both upfront costs and potential long-term savings. Installation typically ranges from $1,500 to $3,500 per skylight when hiring a contractor, depending on size, materials, and local labor rates. Smaller, fixed skylights cost less than larger, motorized versions that open and close. While skylights can reduce daytime lighting costs, they can also increase heating or cooling expenses if not properly insulated or if they face direct afternoon sun.
A practical takeaway: Before deciding whether a skylight makes sense for your situation, consider which rooms would benefit most from additional daylight, whether your roof structure can accommodate one, and how the additional light might affect heating and cooling needs throughout the year.
The skylight market offers several distinct types, each with different operating principles and performance characteristics. Understanding these differences helps clarify what's involved during installation and how each type functions once in place.
Free Guide to Pay by Plate Illinois Billing →
Fixed skylights are the most basic option. They're sealed permanently in place and cannot open or close. Light enters, but no ventilation occurs through the skylight itself. Fixed models are typically the least expensive to purchase and install because they have no moving parts or mechanical systems. They work well in spaces where added light matters but ventilation through the skylight isn't necessary, such as a living room or bedroom with other windows or vents.
Operable skylights can open and close, usually via a manual crank, remote control, or motorized system. When opened, they provide both light and ventilation, allowing hot air to escape from upper-story rooms. This ventilation feature appeals to homeowners who want to reduce air conditioning costs or improve air circulation. However, operable models cost more upfront and involve more complex installation because the frame and sealing mechanisms must be precise to prevent leaks when closed.
Tubular skylights (also called sun tunnels) use rigid or flexible tubes to channel light from a roof-mounted dome down to a ceiling diffuser. These work well when a traditional skylight won't fit the space—they're narrow enough to fit between roof rafters and can navigate around obstructions. They're typically smaller than conventional skylights and cost less to install, though they don't provide as much light as full-size windows.
Materials vary significantly. Standard glass skylights are durable and clear but can transmit excess heat. Tempered glass is stronger and less likely to shatter. Acrylic or polycarbonate domes cost less and insulate better than glass but may discolor over time with UV exposure. Many high-performance skylights come with double or triple glazing and low-emissivity (low-E) coatings that reflect heat while allowing light through.
A practical takeaway: Match the skylight type to your actual needs. If you want light only, a fixed skylight is simpler and cheaper. If heat escape or ventilation matters, choose an operable model. If space is tight or existing structure limits options, a tubular skylight may be the only viable choice.
Before any skylight can be installed, the roof must be evaluated to determine whether it can safely accommodate one. This inspection phase is critical because improper installation can lead to leaks, structural damage, or safety hazards.
Free Guide to Mold Removal Methods for Walls →
Roof pitch (angle) affects what types of skylights can be installed. A pitched roof—sloped at an angle rather than flat—works better for skylights than a perfectly flat roof because water naturally drains away from the opening. Most skylights perform well on roofs pitched between 15 and 60 degrees. Very steep roofs may present installation challenges; very flat roofs require special attention to drainage and flashing design.
The interior structure must be examined before cutting an opening. Installers need to identify where roof rafters, trusses, electrical wiring, plumbing, and HVAC ducts are located. Cutting through a structural member without proper support can weaken the roof and cause sagging or collapse. If the skylight opening would fall on a beam, the installation requires additional support work—installing a header beam to carry the weight across the opening. This adds complexity and cost but is necessary for structural safety.
Roof material matters too. Asphalt shingles are common and straightforward to work with; the opening is cut, flashing is installed, and shingles are replaced around the edges. Metal roofs, tile, or slate roofs require different flashing approaches and specialized knowledge. Installation on these materials often takes longer and costs more because special measures prevent leaks at the transitions between materials.
Attic space and ventilation paths also influence installation. In attics with limited space or complex truss systems, installation becomes more difficult. Proper ventilation around the skylight is important to prevent moisture buildup inside the attic, which can lead to rot or mold. Some installations require installing light wells or shafts that angle down from the roof opening to the ceiling below, particularly if the skylight opening doesn't align directly with the room it's meant to light.
A practical takeaway: Before committing to a skylight project, hire someone to inspect your specific roof—pitch, structure, and materials. This inspection should identify any obstacles and reveal whether additional structural support will be needed, both of which affect the final scope and cost.
Skylight installation follows a logical sequence from roof opening to final sealing. Understanding this process clarifies what's involved and why certain steps matter.
How to Delete Your Fitbit Account Guide →
The first step is marking and cutting the roof opening. Using measurements from the skylight frame, installers mark the outline on the roof. From inside the attic, they drill reference holes through the roof to mark the corners from above. Then the roof is cut—usually with a reciprocating saw, circular saw, or hole saw depending on the roof material and opening size. Any roofing material, underlayment, and sheathing within the marked area are removed. This is when structural considerations from the previous step become real: if the opening cuts through a rafter or truss member, support beams must be installed at this time to carry the load around the opening.
Next, the rough opening is prepared. The edges of the opening are cleaned, and any damaged wood is reinforced or replaced. Proper framing around the opening ensures the skylight frame will sit on solid, level support. Flashing material is then installed before the skylight itself goes in. Flashing is crucial; it's the metal (usually aluminum or galvanized steel) shield that sits under the shingles above the skylight and over them below, creating channels that guide water away from the opening and prevent it from running into the house.
The skylight frame is positioned into the opening and secured to the roof framing. Fasteners must be placed carefully to hold it firmly without over-tightening, which can distort the frame. Once the frame is secure, the roofing material is reinstalled around the skylight's perimeter. Shingles are carefully cut to fit around the flashing edges, and sealant is applied to create a weather-tight seal. If the roof uses tile, metal, or other materials, the surrounding area is restored to match the existing roof.
On the interior side, after the roof is sealed and weathertight, the ceiling opening is addressed. If the skylight opening aligns with a room below, the interior frame is often finished with trim. If a light well is needed—typically when the skylight sits above an attic space or between joists—the well is framed out with wood and typically finished with drywall
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.