Learn About Getting Your CDL in Texas

Understanding CDL Requirements in Texas

A Commercial Driver's License (CDL) in Texas allows you to operate large commercial vehicles for work purposes. The Texas Department of Public Safety (DPS) oversees CDL licensing and sets the standards that drivers must meet. Before pursuing a CDL, it's important to understand the basic requirements that Texas law establishes.

Your Free Guide to Texas Renaissance Festival Basics →

To obtain a CDL in Texas, you must be at least 18 years old to drive within the state and at least 21 years old to operate commercial vehicles across state lines. You need to hold a valid Texas driver's license or be prepared to obtain one if you don't already have one. Texas also requires that you pass a medical examination conducted by a certified medical examiner. This medical certificate confirms that you meet the federal health standards necessary for safe commercial driving.

You must be a Texas resident or have a Texas address listed on your application materials. This means you need to provide proof of residency, such as a utility bill, lease agreement, or other official documents showing your current address in the state. Additionally, Texas requires that you provide your Social Security number as part of the licensing process.

Your driving record matters significantly. If you have certain traffic violations, serious driving offenses, or a suspended license, you may face obstacles in obtaining your CDL. Texas evaluates your complete driving history when processing your request. The state also has rules about how many moving violations you can have within specific time periods.

Practical Takeaway: Before starting the CDL process, gather your valid Texas driver's license, proof of residency, Social Security number, and schedule a medical examination with a certified examiner. Review your driving record to understand any potential issues that may need to be addressed.

Classes of Commercial Driver's Licenses

Texas offers different classes of CDLs based on the type and size of vehicle you plan to operate. Understanding these classes helps you determine which license category matches your career goals and the vehicles you'll drive. Each class has specific requirements and restrictions.

Get Your Free Wine Opener Alternatives Guide →

Class A CDL allows you to operate the largest commercial vehicles, including tractor-trailers and combination vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, provided the towed vehicle weighs more than 10,000 pounds. This is the most versatile CDL class and opens the widest range of commercial driving opportunities. Truck drivers hauling goods across long distances, tanker truck operators, and drivers of large passenger vehicles typically hold Class A licenses.

Class B CDL covers vehicles with a GVWR of 26,001 pounds or more, but the towed vehicle weighs 10,000 pounds or less. Drivers with this class can operate single large vehicles but not combinations where the trailer is heavy. School bus drivers, transit bus operators, and dump truck drivers often hold Class B licenses.

Class C CDL applies to smaller commercial vehicles and specific passenger vehicles. This category includes drivers of vehicles carrying 16 or more passengers (including the driver), or certain hazardous materials vehicles that don't require a Class A or B license. The vehicle's GVWR is less than 26,001 pounds for this class.

Beyond the basic class, you can add endorsements to your CDL. Common endorsements include the H endorsement for hazardous materials, the T endorsement for double/triple trailers, the P endorsement for passenger vehicles, the S endorsement for school buses, and the X endorsement for tanker vehicles. Each endorsement requires additional testing and knowledge of specific regulations.

Practical Takeaway: Match your intended vehicle type to the correct CDL class. Research the endorsements your desired position requires, as these add to your qualifications and job opportunities. For example, if you want to drive a school bus, you need at least a Class B CDL with an S endorsement.

The Written Testing Process

The CDL written testing process in Texas includes multiple exams that measure your knowledge of traffic laws, vehicle operation, and safety procedures. You must pass a general knowledge test plus any tests related to your chosen class and endorsements. These tests are based on the Texas CDL handbook, published by the DPS.

Free Guide to Opening Wine Bottles Correctly →

The general knowledge test covers traffic laws, safe driving practices, vehicle inspection, and hazard awareness. You'll answer questions about things like proper following distances, how to handle brake failure, vehicle weight and balance, and how to respond to emergency situations. This test typically contains 50 questions, and you need to answer at least 40 correctly to pass. The test is offered in multiple languages, including English and Spanish.

For Class A licenses, you'll take an additional air brakes test if your vehicle has air brakes. This test focuses on how air brake systems work, how to inspect them, and how to handle them in different driving conditions. The air brakes test has 25 questions, and you need 20 correct answers to pass. Many commercial vehicles use air brakes, making this a crucial test for Class A drivers.

If you're pursuing endorsements, each one has its own test. The hazardous materials (H) endorsement test covers the rules for transporting dangerous goods, identifying hazard classes, and emergency procedures. The passenger (P) endorsement test focuses on passenger safety and management. The school bus (S) endorsement test covers specific rules about student passenger safety and school bus operation. Each endorsement test has 20 to 50 questions depending on the endorsement.

You can take these written tests at any Texas DPS office. You'll need to bring your valid Texas driver's license, proof of residency, and your medical certificate. The DPS offers testing six days a week at most locations, though hours vary. You should study the CDL handbook thoroughly before taking any test, as these exams require substantial knowledge of commercial vehicle operation and traffic safety.

Practical Takeaway: Obtain the Texas CDL handbook from the DPS website or at any DPS office, and study it thoroughly. Take practice tests if available to assess your knowledge before attempting the official exams. Plan to take the general knowledge test first, then schedule additional tests for your class and endorsements once you've passed.

The Skills Test and Behind-the-Wheel Evaluation

After passing the written tests, you must complete a skills test that demonstrates you can safely operate a commercial vehicle. This test consists of three parts: a vehicle inspection test, a basic control skills test, and an on-road driving test. A certified examiner from the DPS evaluates your performance in all three areas.

Exxon Credit Card Online Account Management Guide →

The vehicle inspection test requires you to walk around and inspect a commercial vehicle, identifying key components and explaining what you're checking. You'll need to know about tires, brakes, lights, mirrors, coupling devices (for combination vehicles), and fluid levels. The examiner asks questions as you perform the inspection. You must demonstrate that you can identify safe and unsafe conditions. This test emphasizes that drivers are responsible for ensuring their vehicles are roadworthy before operating them.

The basic control skills test takes place in a closed course with various obstacles and exercises. You'll demonstrate your ability to back up the vehicle in straight lines and at angles, make turns while staying within marked boundaries, and navigate around obstacles. This test shows the examiner that you can control a large vehicle in tight spaces. For combination vehicles, you'll also perform coupling and uncoupling procedures. Many people find this portion challenging because commercial vehicles behave differently than regular cars, especially during backing and turning.

The on-road driving test is typically 30 to 50 minutes long. You'll drive in actual traffic conditions on streets or highways that the examiner selects. The examiner sits in the passenger seat and evaluates your driving safety, ability to follow traffic laws, smooth acceleration and braking, proper signaling and mirror checking, and handling of traffic situations. You must demonstrate that you can safely operate the vehicle in real-world conditions while following all traffic rules.

You must bring a commercial vehicle to your skills test appointment that matches the class of license you're testing for. Many testing centers have lists of approved testing vehicles and recommended schools or facilities where you can arrange a vehicle. Some commercial driving schools provide vehicles for testing. You should practice extensively before attempting these skills tests, as they're challenging and require both knowledge and practical experience.

Practical Takeaway: Consider enrolling in a commercial driving school that offers in-vehicle training and can provide a testing vehicle. Schools often have instructors who know exactly what examiners look for and can help you prepare specific skills. Practice all three test components multiple times before your scheduled test date.

Commercial Driving Schools in