Learn About Common Emergency Water Storage Mistakes

Mistake #1: Using Food-Grade Containers Without Proper Preparation

One of the most common errors people make when storing emergency water is assuming that any food-grade container will work straight from the store. While food-grade containers are indeed safer than non-food-grade alternatives, they often require thorough cleaning and preparation before use. Many containers that held juice, milk, or other beverages can contain residual sugars, proteins, or bacteria that promote algae growth and contamination in stored water.

Learn About AAA Visa Card Online Account Access →

Before filling any container with water for long-term storage, you should wash it thoroughly with soap and hot water, then rinse it completely. Some people skip the rinsing step, leaving soap residue that can affect water taste and potentially cause stomach upset. After rinsing, many experts recommend sanitizing the container with a dilute bleach solution—typically one tablespoon of unscented bleach per gallon of water—letting it sit for about 30 seconds, then rinsing again thoroughly with clean water.

The container material itself matters significantly. Clear plastic containers allow sunlight to penetrate, which can encourage algae growth even in stored water. Opaque or dark-colored containers provide better protection against light degradation. Additionally, containers should have tight-fitting lids that seal properly. Loose-fitting lids allow air circulation, which introduces oxygen that can promote bacterial growth and allows dust and contaminants to enter.

Food-grade buckets with lids, often purchased from restaurants or bakeries, can be excellent storage vessels if properly prepared. However, some people fail to verify they actually are food-grade or don't know what the buckets previously contained. A bucket that held non-food chemicals or industrial materials should never be used for water storage, regardless of how thoroughly it's cleaned.

Practical takeaway: Before using any container, verify it's actually food-grade, wash it completely, sanitize it with a bleach solution, rinse thoroughly, and ensure the lid seals tightly. Store containers in a cool, dark location away from direct sunlight.

Mistake #2: Storing Water in Inappropriate Locations

Where you store emergency water is just as important as how you store it, yet many people place water in locations that compromise its quality and longevity. Temperature fluctuations, light exposure, and proximity to chemicals or contaminants can all degrade stored water faster than expected. A common mistake is storing water in garages where temperature swings can be extreme—freezing in winter and very hot in summer. These temperature changes can weaken plastic containers, cause them to crack, and accelerate chemical leaching from the plastic into the water.

Learn How to Request Calendar Access in Outlook →

Basements seem like obvious storage locations, but they present their own problems. Many basements have moisture issues, and water stored directly on concrete floors can absorb minerals and potentially develop an unpleasant taste. Additionally, basements often contain cleaning supplies, pesticides, paint, or other chemicals stored nearby. Even though containers seal, volatile compounds from these chemicals can permeate plastic over time, particularly in poorly ventilated spaces.

Another frequent mistake involves storing water containers near furnaces, water heaters, or other heat sources. Heat accelerates the breakdown of plastic and reduces water storage longevity. Water stored in attics experiences similar problems, with extreme temperature variations and potential heat buildup during summer months. A study by the Centers for Disease Control and Prevention notes that water stored at temperatures above 70 degrees Fahrenheit degrades more quickly than water stored in cooler conditions.

The ideal storage location maintains a consistent temperature between 50 and 70 degrees Fahrenheit, stays away from direct sunlight, and is positioned away from chemicals, pesticides, or other household contaminants. Interior closets, interior pantries, or climate-controlled storage areas work well. Some people successfully store water in crawl spaces if they remain relatively cool and dry. The key is preventing temperature swings and light exposure while maintaining distance from potential contaminants.

Practical takeaway: Store water in cool, dark, climate-controlled areas away from chemicals and heat sources. Avoid garages, attics, and basements with moisture or chemical storage. Maintain consistent temperatures to maximize water longevity.

Mistake #3: Not Rotating Water Regularly or Using Outdated Supplies

Water itself doesn't expire, but stored water can become contaminated over time, especially if containers aren't properly sealed or if the storage environment introduces microorganisms. Many people store water once and forget about it for years, never checking container integrity or considering whether the water might have been compromised. A broken seal, a pinhole leak, or gradual plastic degradation can allow contamination to occur without visible signs.

Get Your Free Guide To Online Degrees →

Recommended practice involves rotating water supplies approximately every six months to one year. This doesn't necessarily mean throwing out water—though you may choose to—but rather checking containers for leaks, cracks, or signs of cloudiness or discoloration. If water appears discolored, smells off, or shows any signs of algae growth, it should be discarded. When rotating water, you can use the older water for household cleaning, watering plants, or other non-consumption purposes, then replace it with fresh water.

Many people mistakenly believe that once stored, water requires no further attention. This passive approach leads to situations where emergency water is needed but found to be contaminated or stored in compromised containers. Even if water looks clear, microorganisms can grow invisibly. The Federal Emergency Management Agency (FEMA) recommends storing water in food-grade containers with tight seals and checking stored supplies at least twice per year.

Another related mistake involves storing water in the same location as perishable foods or items with strong odors. While the containers seal, over extended periods subtle flavors or odors can transfer through plastic, making water unpalatable even if it's safe to drink. Keeping water separate from strong-smelling foods, cleaning supplies, and other household items prevents this cross-contamination.

Practical takeaway: Check stored water every six months for container damage, discoloration, or odors. Rotate supplies annually, using older water for cleaning or household purposes. Document storage dates and locations to track supply freshness.

Mistake #4: Neglecting Water Treatment and Purification Considerations

Many people assume that simply storing water means it will remain safe to drink indefinitely. While properly stored water can remain drinkable for years, relying solely on storage without considering treatment creates unnecessary risk. Water from municipal supplies contains chlorine or other disinfectants that help keep it safe, but this protection diminishes over time as these chemicals break down. Water stored without any treatment measures may develop bacterial or microbial growth, particularly if containers aren't perfectly sealed or if conditions aren't optimal.

Get Your Free Turkey Roasting Guide →

One mistake involves storing untreated water from wells, lakes, rivers, or other non-municipal sources. Even if the water appears clear and clean, untreated water from natural sources can contain parasites, bacteria, and viruses that aren't immediately visible. Before storing water from these sources, it should be treated through boiling, chemical treatment, filtration, or UV exposure. Storing untreated raw water from questionable sources creates a false sense of preparedness—the water may be unsafe to drink when the emergency occurs.

Another error involves not keeping water treatment supplies alongside stored water. Even municipal water that has been properly stored may benefit from additional treatment before consumption, depending on storage duration and conditions. Having water purification tablets, filters, or bleach (for chemical disinfection) stored with your water supply means you can treat water if you have concerns about its safety. One teaspoon of unscented bleach per gallon of water, allowed to sit for 30 minutes, can disinfect water when needed.

People often underestimate the amount of water needed during emergencies. Many guidelines recommend storing one gallon per person per day, but this accounts only for drinking and cooking. If stored water becomes contaminated and you have no treatment method, you face serious problems. Storing extra water and maintaining treatment supplies provides a safety margin. Additionally, some people store water without considering different family members' needs—infants, elderly individuals, and people with certain medical conditions may require specific water considerations.

Practical takeaway: Store water treatment supplies (purification tablets, filters, or unscented bleach) alongside your water supply. If storing untreated water, treat it first through boiling or chemical disinfection. Plan for more water than minimum recommendations to account for potential contamination.

Mistake #5: Underestimating Water Quantity Needs