The ankle brachial index, commonly called an ABI test, measures how well blood flows through your legs by comparing blood pressure in your ankles to blood pressure in your arms. The basic principle is straightforward: healthy arteries deliver blood evenly throughout the body, so blood pressure readings should be similar whether measured at the arm or ankle. When they're not, it signals that narrowing or blockages in the leg arteries may be restricting blood flow.
Learn About Paying Your FGUA Bill Online →
During an ABI test, a healthcare provider takes your blood pressure using a standard cuff and a device called a Doppler ultrasound probe. The test begins with arm measurements—typically both sides—using the standard cuff placement around your upper arm. Then, the provider measures the ankle arteries, usually the posterior tibial artery (behind the ankle bone) and the dorsalis pedis artery (on top of the foot). Each location gets measured separately, and the test takes about 10 to 15 minutes from start to finish.
The actual calculation is simple math. A technician divides the highest ankle pressure reading by the highest arm pressure reading. The result tells doctors how blood pressure compares between these two areas. A normal ABI result falls between 0.90 and 1.30, meaning leg and arm pressures are proportional. Results below 0.90 suggest possible narrowing in leg arteries, while results above 1.30 might indicate stiff, calcified arteries that don't compress normally.
Why this matters: The ABI test can reveal peripheral artery disease, or PAD, which affects millions of Americans. According to the American Heart Association, about 6.5 million Americans over age 40 have PAD, often without knowing it. Many people have no symptoms at all, making the test valuable for screening. The test is non-invasive, meaning no needles or cutting involved, and produces no radiation.
Takeaway: An ABI test is a simple pressure comparison between your ankles and arms that helps doctors spot blood flow problems before symptoms appear. Understanding what the numbers mean helps you discuss results with your healthcare provider.
When you arrive for an ABI test, you'll be asked to rest in a lying position for five to ten minutes before measurements begin. This rest period matters because it allows your blood pressure to stabilize, giving more accurate readings. The room should be quiet and at a comfortable temperature, as stress and cold can temporarily raise blood pressure.
Free Guide to Pay by Plate Illinois Billing →
The technician starts by wrapping a standard blood pressure cuff around your upper arm, just as you'd experience at any routine doctor visit. Using a Doppler ultrasound probe—a small handheld device about the size of a marker—they locate the brachial artery in your arm and record the systolic pressure reading (the top number). This process happens on both arms, since sometimes one arm naturally has slightly higher pressure. The provider notes whichever reading is higher.
Next, the technician moves to your legs. A blood pressure cuff wraps around your calf, just above the ankle. The Doppler probe then finds the pulse in your ankle. There are two main arteries checked: the posterior tibial artery on the inner side of the ankle and the dorsalis pedis artery on the top of the foot. The technician records the systolic pressure from each artery. This is where the "B" in ABI comes from—these are the "brachial" (arm) and "ankle" measurements.
The entire process repeats on both legs, so you'll have pressure readings from two arms and four ankle locations (two arteries in each foot). Some clinics only measure one arm and both legs, depending on their protocol. All these numbers get recorded on the test report. The whole procedure causes no pain, though you might feel mild tingling or pressure as the cuff inflates.
Takeaway: The test itself is painless and straightforward. Knowing what to expect—cuffs, a small ultrasound probe, and multiple readings—helps you stay relaxed, which keeps your readings accurate.
Your ABI result comes as a single decimal number, but that number tells a meaningful story about your circulation. Here's what different ranges typically indicate. An ABI of 1.0 to 1.30 is considered normal. This means your ankle blood pressure is roughly equal to or slightly higher than your arm blood pressure, which is what doctors expect in healthy arteries. Many people will fall into this range.
Free Guide to Mold Removal Methods for Walls →
An ABI between 0.90 and 0.99 is borderline and suggests mild narrowing in leg arteries might be developing. Even though you may feel fine, this range warrants monitoring and conversation with your healthcare provider about lifestyle factors and risk assessment. People in this range might benefit from increased physical activity, smoking cessation if applicable, or managing conditions like high blood pressure or diabetes.
An ABI between 0.71 and 0.89 indicates moderate peripheral artery disease. At this level, leg pain during walking—called claudication—is more likely to develop, though not everyone experiences it. This range suggests meaningful arterial narrowing and typically prompts more active management strategies. Your provider might recommend supervised exercise programs, medications to improve blood flow, or further imaging studies like ultrasound or CT scans.
An ABI of 0.70 or lower signals severe peripheral artery disease. This range carries higher risk for complications and often requires more aggressive treatment options. These might include medication adjustments, referral to a vascular specialist, or discussion of advanced interventions. At this level, wound healing can be compromised, and the risk of serious complications increases.
ABI results above 1.30 suggest calcified, stiff arteries that don't compress normally, sometimes associated with diabetes or kidney disease. This pattern is sometimes called "incompressible" arteries and may indicate different health concerns than simple narrowing. Your provider might order additional tests to understand what's causing this pattern.
Takeaway: Your ABI number is a starting point for conversation with your doctor, not a diagnosis by itself. Context matters—your symptoms, age, other health conditions, and risk factors all shape what the number means for your health plan.
Healthcare providers order ABI tests for several specific reasons, and understanding when the test gets used helps you recognize why your doctor might recommend it. The most common reason is when someone has leg pain during walking that improves with rest—the classic symptom pattern called intermittent claudication. This pain happens because narrowed arteries limit blood flow to leg muscles during activity. The ABI test helps confirm whether arterial narrowing is the cause.
How to Delete Your Fitbit Account Guide →
Doctors also order ABI tests for screening purposes in people with risk factors for peripheral artery disease, even without symptoms. Major risk factors include age over 60, diabetes, high blood pressure, high cholesterol, smoking history, or family history of early heart disease or stroke. A study published in Circulation found that about 30 percent of people over age 70 have some degree of PAD, often undetected. Screening with ABI can catch disease in early stages when lifestyle changes and medication might prevent progression.
If you have diabetes, your doctor is more likely to recommend regular ABI testing. People with diabetes develop peripheral artery disease more frequently and more severely than the general population. According to the American Diabetes Association, about one in three adults with diabetes also has PAD. Early detection matters significantly because high blood sugar damages blood vessel walls over time, and catching this damage early creates more treatment options.
ABI testing also helps evaluate unexplained leg symptoms. Sometimes patients describe leg swelling, color changes, skin sores that won't heal, or unusual sensations in their feet. These could stem from circulation problems or other conditions. The ABI test helps narrow down the cause. It's particularly useful in distinguishing between poor circulation and other conditions affecting the legs.
For people who've already experienced heart attacks or strokes, ABI testing often reveals whether similar narrowing is happening in leg arteries. This matters because if large arteries in the legs are narrowed, other blood vessels throughout the body might be affected too. The test essentially provides a window into overall vascular health.
Takeaway: ABI testing isn't for everyone—it's ordered when symptoms suggest circulation problems or when risk factors make screening worthwhile. Knowing why your doctor ordered the test helps you understand
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.