An inhaler without a spacer requires precise timing and coordination. You need to press down on the canister at the exact moment you breathe in, and your lungs need to be ready to receive the medication. For many people—especially children, older adults, and anyone with coordination challenges—this timing is nearly impossible to get right. A spacer is a tube-shaped device that attaches to your inhaler and holds the medication in a chamber, giving your lungs time to capture it. Think of a spacer as a holding area between the inhaler and your mouth.
Learn About Paying Your FGUA Bill Online →
Research shows that using a spacer significantly increases how much medication actually reaches your lungs. Studies from respiratory health organizations indicate that without a spacer, patients may only get 10-15% of the medication dose into their lungs. With a spacer, that number jumps to 20-25% or higher, depending on technique. The difference is substantial enough that many doctors routinely recommend spacers for rescue inhalers (like albuterol) and maintenance inhalers (like fluticasone).
Spacers come in different sizes and styles. The most common type is a straight tube, typically 6-8 inches long, that fits between your mouth and the inhaler canister. Another option is a spacer with a mask attachment, which is especially useful for young children who can't form a good seal around a mouthpiece. Some spacers have built-in features like color-changing indicators that show when you're breathing in, though the basic tube design works just as well for most people.
The cost of a spacer is modest—usually between $15 and $40. Many insurance plans cover spacers, and you may find them available at pharmacies without insurance. A single spacer can last several years with proper care, making it one of the most cost-effective tools for managing respiratory conditions.
Takeaway: A spacer bridges the gap between your inhaler and your lungs, allowing more medication to reach where it needs to go. This is why your doctor may have recommended one, or why it's worth discussing at your next appointment.
Before you can use a spacer, you need to put it together correctly. The process is straightforward, but doing it right matters. Start by removing the spacer from its packaging and inspecting it for any damage or cracks. Look inside the tube—it should be clean and free of debris. If your spacer was stored for a while, run it under warm water and let it air dry before using it, since dust can accumulate inside.
Free Guide to Pay by Plate Illinois Billing →
Next, remove the blue cap from the end of your inhaler canister. This cap protects the metal nozzle when the inhaler isn't in use. Look at the nozzle itself—you'll see it's tapered to fit into the mouthpiece of the spacer. Insert the inhaler's nozzle firmly into the wider opening at the top of the spacer. Push it in with a slight twisting motion until it feels snug. Don't force it, but it should feel secure. If you can easily pull the inhaler out without resistance, it's not seated properly—try again.
Check that the spacer's mouthpiece opening (the end you put in your mouth) is clear and unobstructed. Some spacers have removable mouthpieces that can be cleaned separately. If yours does, make sure it's clicked or screwed back into place. If your spacer came with a mask attachment instead of a mouthpiece, secure the mask to the spacer's lower end, ensuring it fits snugly but not so tight that it's uncomfortable against the face.
A quick assembly check: Hold the assembled spacer up to the light and look through it from the mouthpiece end. You should see light coming through the entire length. If the view is blocked, something isn't aligned properly. Disassemble and try again. Once assembled correctly, your spacer is ready to use.
Takeaway: Proper assembly takes 30 seconds and ensures the spacer works as intended. A loose connection or misaligned mouthpiece can reduce how much medication reaches your lungs.
The whole point of a spacer is that you don't need perfect timing anymore. However, you still need to follow the correct breathing steps to get the medication into your lungs. Start by shaking your inhaler canister vigorously for 10-15 seconds. This mixes the medication evenly within the canister. This step is often skipped, but it makes a real difference—an unshaken inhaler may dispense a different dose each time.
Free Guide to Mold Removal Methods for Walls →
Sit upright in a comfortable position. Standing is fine, but sitting gives you more stability and control. If you're using a mask attachment (common for young children), hold the spacer so the mask forms a tight seal around the nose and mouth. For a mouthpiece spacer, bring the mouthpiece to your lips and close your mouth around it, forming a seal with your lips. Don't press your teeth against the spacer—teeth can puncture it over time.
Take a normal, relaxed breath out through your mouth. You're simply emptying your lungs to make room for the medication. Now here's where the spacer's advantage becomes clear: Press down on the inhaler canister once to release a dose of medication into the spacer chamber. Then immediately begin breathing in slowly through your mouth. The medication is already in the chamber waiting for you—you don't need to time a simultaneous press and breath. Breathe in steadily and deeply, filling your lungs with air. This should take about 3-5 seconds.
After you've breathed in, hold your breath for 10 seconds if you can manage it. This pause allows the medication particles to settle deep in your lungs rather than being immediately exhaled. If you're using the spacer with a young child who can't hold their breath, they don't need to—just breathing in normally is sufficient. Then breathe out slowly through your mouth.
For a single dose, this completes one inhalation cycle. If your prescription calls for two puffs, wait at least 30-60 seconds before repeating the process. During this wait, shake the inhaler again before firing the second dose. Some people use the spacer for both puffs without disassembling it; others prefer to take a break between doses.
Takeaway: The spacer removes the pressure of timing your breath with the button press. Shake, press, then breathe—and the spacer does the holding for you.
Even with a spacer, mistakes happen. One of the most frequent errors is not shaking the inhaler. People often remember to shake for the first use but skip it on subsequent doses. Inhalers separate when sitting idle, with heavier medication particles settling at the bottom. If you don't shake it, your first puff may contain mostly propellant and very little actual medication. Your last puff of the day may be overly concentrated. Shaking takes 15 seconds and costs nothing—it's worth the habit.
How to Delete Your Fitbit Account Guide →
Another common problem is breathing in too quickly or taking short, shallow breaths. When you rush your inhalation, the medication doesn't distribute evenly through your lungs. It's like trying to fill a balloon by blowing too hard—the air goes in but inefficiently. Slow down your breathing. Imagine you're gently inflating a balloon over several seconds. This slower pace allows medication particles to travel deeper into your respiratory system.
Some people remove the spacer from the inhaler immediately after pressing the canister. Wait. The medication needs a moment to settle into the spacer chamber. Press the inhaler button, then keep the spacer attached for 2-3 seconds before breathing in. This gives the dose time to be fully released into the chamber. Removing it instantly can mean some medication never reaches the spacer.
Checking whether the spacer is clean is another overlooked step. Residue or dust inside the spacer reduces its effectiveness. Once a week, disassemble your spacer and wash the internal tube with warm water. Let it air dry completely on a clean cloth or paper towel. Do not use a cloth to dry the interior—you want it air-dried to avoid lint residue inside.
People also sometimes use the wrong breathing pattern if they
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.