How To Use a Sharpening Steel Guide

Understanding What a Sharpening Steel Actually Does

A sharpening steel, also called a honing steel or realignment steel, is a tool that looks similar to a knife but serves a different purpose than you might think. Many people confuse sharpening steels with actual sharpening tools, but they work in fundamentally different ways. A sharpening steel does not remove metal from your knife blade. Instead, it realigns the microscopic edge of your knife that has become bent or folded during normal use.

Learn About Emergency Food Resources and Options →

When you use a knife to cut food, the blade's edge doesn't stay perfectly straight at the microscopic level. The metal edge bends slightly to one side or the other with each cut. Over time, this bending makes your knife feel dull even though the blade hasn't actually lost its sharpness—it just needs realignment. This is where a sharpening steel becomes useful. By running your knife blade along the steel at the correct angle, you straighten out these microscopic bends and restore the blade's cutting ability.

Sharpening steels typically measure between 8 and 12 inches long and have a cylindrical or slightly oval shape. The surface of the steel contains fine ridges or grooves that catch the knife blade and realign its edge. Different sharpening steels have different textures—some are smooth with fine ridges, while others have coarser grooves for more aggressive realignment.

Understanding this distinction matters because using a sharpening steel regularly can extend the time between actual sharpenings. Most home cooks can maintain their knives with a sharpening steel for several months before needing to use a true sharpening tool like a whetstone or professional sharpening service. According to kitchen equipment surveys, people who use sharpening steels regularly report that their knives stay sharp-feeling for 50% longer than knives that receive no maintenance.

Practical Takeaway: Think of a sharpening steel as a maintenance tool rather than a sharpening tool. Use it regularly between actual sharpenings to keep your knives performing well.

Choosing the Right Sharpening Steel for Your Needs

Sharpening steels come in several varieties, and choosing the right one depends on your knives and how often you cook. The main types include smooth steels, grooved steels, and diamond-coated steels. Each type has different characteristics that make it better suited for certain situations.

Learn About Unemployment Extension Programs →

Smooth steels have a polished surface with very fine ridges that are barely visible to the naked eye. These work well for maintaining knives that are already relatively sharp and for regular maintenance. Smooth steels are gentle on blade edges and won't remove much metal, making them ideal for high-quality kitchen knives that you want to preserve. If you cook several times per week and want to maintain your knives between monthly or quarterly sharpenings, a smooth steel is usually the better choice.

Grooved steels have more pronounced ridges or furrows running along their length. These steels are more aggressive and remove slightly more metal with each use. Grooved steels work better if your knives have become somewhat dull or if you use your knives heavily and want more aggressive realignment. Professional chefs often prefer grooved steels because they use their knives intensively throughout the day. However, grooved steels will wear down your blade faster over time, so they're best reserved for knives that can handle more aggressive maintenance.

Diamond-coated steels represent the most aggressive option. The surface is embedded with tiny diamond particles that cut into the blade edge rather than just realigning it. These steels actually remove a small amount of metal, making them part sharpening tool and part honing steel. Diamond-coated steels work well if you have older knives, very dull blades, or if you need to bring a blade back to acceptable sharpness without using a full sharpening system.

When selecting a sharpening steel, also consider the handle style. Steel handles stay cooler and feel more professional but can be slippery if your hands are wet. Wooden handles offer better grip and comfort during extended use. Synthetic handles provide a middle ground with good grip and durability. Most sharpening steels range from 8 to 12 inches long—longer steels work well for larger chef's knives, while shorter ones suit smaller paring knives and everyday use.

Practical Takeaway: Start with a smooth steel if you maintain your knives regularly. Upgrade to a grooved or diamond-coated steel only if you cook heavily or have knives that have become dull.

The Correct Angle and Hand Position for Using a Sharpening Steel

Using a sharpening steel correctly requires understanding and practicing the proper angle between your knife blade and the steel. The angle matters significantly because it determines whether you're actually realigning your blade or just sliding it across the steel without any benefit. Most kitchen knives have an edge angle between 15 and 20 degrees on each side of the blade, which means your knife should approach the steel at approximately 15 to 20 degrees from vertical.

Learn About State Tax Programs and Deductions →

To understand angle better, imagine holding the sharpening steel straight up in front of you. A 90-degree angle would mean your knife blade is completely horizontal and parallel to the ground. A 45-degree angle would mean your blade points halfway between horizontal and vertical. For most kitchen knives, you want an angle closer to 15 to 20 degrees—much steeper than 45 degrees but still allowing the blade to approach the steel at an acute angle.

The best way to find the correct angle is to start with your knife blade resting flat against the steel, then lift the spine of the knife (the back edge opposite the cutting edge) just slightly. Lift it until you can barely fit a business card between the spine and the steel. This creates approximately the right angle for most household kitchen knives. Some people describe it as making a "V" shape with the knife and steel, where the opening of the V points downward.

For hand position, hold the sharpening steel vertically in front of you at chest height, gripping the handle firmly with one hand. Your other hand holds the knife. Start by positioning the knife's heel (the part closest to the handle) at the top of the steel. The blade should touch the steel along its entire edge. Some people prefer to hold the steel at an angle or even lying flat on a cutting board—these methods work too, but the vertical approach is easiest for beginners to learn correctly.

With your knife in position, draw it down along the steel from heel to tip, maintaining consistent pressure and angle throughout the motion. The blade should move downward and slightly backward along the steel. Once you complete one stroke on one side of the blade, switch sides. Most people perform 5 to 10 strokes on each side of the blade during a typical honing session, though light maintenance requires only 3 to 5 strokes per side.

Practical Takeaway: The angle is the most critical part of using a sharpening steel correctly. Start by keeping your knife blade nearly flat against the steel, then tilt it up just enough to fit a thin card between the spine and steel. This positioning works for most household knives.

Step-by-Step Process for Using Your Sharpening Steel

Once you understand the basics of angle and hand position, using a sharpening steel becomes a straightforward process that takes only a few minutes. Most people can hone their knives in less than five minutes, making it an easy maintenance habit to develop. Here is the detailed process that works for the majority of home cooks:

Learn About NPI Registration for Healthcare Providers →

• Step 1: Prepare your workspace. Stand at your kitchen counter or cutting board with firm footing. Make sure you have adequate lighting so you can see your knife blade clearly. Some people prefer to place the sharpening steel's handle on a cutting board and hold it at an angle, while others hold it vertically. Choose whichever feels most stable and comfortable for you. Your primary goal is safety and consistency, not speed.
• Step 2: Hold the steel properly. Grip the steel's handle firmly but not so tightly that your hand shakes. Your grip should feel secure but relaxed. Keep the steel in a fixed position—it should not move during the honing process. Your moving hand should be the one holding the knife, not the steel.
• Step 3: Position your knife at the correct angle. Hold