"How to Use a Multimeter to Check Voltage"

Understanding Multimeter Basics and Safety

A multimeter is an electronic testing tool that measures electrical properties in circuits and devices. The word "multimeter" comes from its ability to measure multiple things: voltage, current, and resistance. Understanding how this tool works and how to use it safely is the foundation for any electrical troubleshooting task.

Get Your Free Browser Bookmarking Guide →

Multimeters come in two main types: analog and digital. Analog multimeters have a needle that moves across a numbered scale to show measurements. Digital multimeters (often called DMMs) display numbers on a screen, making them easier to read and generally more accurate. Most people starting out use digital multimeters because the readings are clearer and there's less room for interpretation error.

Safety is the most critical aspect of using a multimeter. Electricity can cause serious injury or death, so you must treat this tool with respect. Before using a multimeter, understand that you are working with potentially dangerous electrical current. Always wear safety glasses when working around electrical systems. Remove metal jewelry that could create accidental electrical contact. Never use a multimeter in wet conditions or with wet hands. If you're testing circuits in a vehicle, disconnect the negative battery terminal first to prevent accidental shorts.

The physical components of a multimeter include a display (digital screen or analog dial), a dial or button selector to choose what you're measuring, test leads (the two wires with probes on the ends), and input jacks where the test leads connect. The black lead always connects to the common (COM) jack. The red lead connects to either the voltage jack (marked V), the current jack (marked A or mA), or the resistance jack (marked Ω) depending on what you're measuring. Some multimeters have all jacks labeled clearly; others use color coding.

Practical takeaway: Before your first measurement, locate all the parts of your multimeter, read the instruction manual that came with it, and identify which jacks correspond to voltage testing. Test your multimeter on a battery you know is working to verify it functions properly before using it on unfamiliar electrical systems.

Types of Voltage and What You're Actually Measuring

Voltage is the electrical pressure that pushes current through a circuit. Think of it like water pressure in pipes—higher voltage means more electrical pressure available to do work. When you use a multimeter to check voltage, you're measuring the potential electrical force between two points in a circuit. This measurement is expressed in volts (V).

Get Your Free City Visitor Guide →

There are two main categories of voltage you'll encounter: alternating current (AC) and direct current (DC). AC voltage changes direction rapidly—in the United States, household electricity alternates 60 times per second. DC voltage flows in one direction consistently, like the power from a battery. Your multimeter has separate settings for AC and DC because they require different measurement methods. Setting your multimeter to measure DC voltage when you're actually testing AC voltage (or vice versa) will give you incorrect readings or no reading at all.

Household outlets in the United States provide approximately 120 volts AC for most outlets and 240 volts AC for larger appliances like electric stoves and air conditioners. Car batteries provide 12 volts DC. Small electronics like phone chargers convert AC wall power to lower DC voltages, often ranging from 5 to 20 volts DC. Batteries for remote controls or children's toys typically provide 1.5 or 9 volts DC. Industrial equipment might use 480 volts AC or higher. Understanding what voltage you expect to find helps you set your multimeter correctly and interpret the results.

When measuring voltage, you're checking the electrical potential difference between two points. A multimeter always measures the difference between where the red probe touches and where the black probe touches. This is why voltage is sometimes called "potential difference." If you touch both probes to the same point, you'll read zero volts because there's no difference. The order matters for DC voltage: if you reverse the leads on DC, you'll get a negative reading, which tells you the polarity is opposite to what you expected.

Practical takeaway: Before measuring voltage, research what voltage the device or circuit you're testing should have. Check whether it uses AC or DC power. Set your multimeter to the correct setting—AC or DC—and choose a voltage range that's higher than what you expect to find. Using a higher range than needed is safer than using a lower range.

Preparing Your Multimeter and Setting It Correctly

Preparation prevents mistakes and keeps you safe. Start by examining your multimeter. Look at the dial or digital display and identify all the settings available. You'll see symbols and numbers representing different measurement types. The V with a curved line above it indicates AC voltage. The V with a straight line above it (or sometimes a V with a dash) indicates DC voltage. Numbers next to these symbols show the range of voltage the setting measures—for example, 20V, 200V, or 2000V.

Learn How to Pay Your Straight Talk Bill →

Check your test leads before every use. Inspect the wires for cuts, cracks, or exposed metal. Cracked insulation on test leads is a serious safety hazard. If you see damage, replace the leads immediately—they're inexpensive and readily available. Flex each wire gently along its length to check for internal breaks. If the wire is damaged, current could bypass the probe and injure you.

Insert the test leads into the correct jacks. The black lead always goes into the COM (common) jack. The red lead goes into the jack marked V (or sometimes Ω and V together) for voltage testing. Some multimeters have an additional jack for current testing marked A or mA—don't use that jack for voltage testing. If your multimeter has multiple voltage jacks at different locations, consult the instruction manual to understand which is which.

Now select your measurement range. This is crucial for both accuracy and safety. Most modern digital multimeters have an "auto range" feature that automatically selects the correct range for you. If your multimeter has this feature, the setting is usually marked "AUTO" on the dial. If your multimeter requires manual range selection, choose a range higher than the voltage you expect to measure. For example, if you're testing a 12-volt car battery, set it to 20V or 200V, not 2V. Starting with a higher range prevents damage to the multimeter's internal circuits. Once you get a reading, you can switch to a lower range for more precision if needed.

Practical takeaway: Create a simple checklist: inspect leads, insert leads in correct jacks, select AC or DC based on your device, choose your voltage range, then measure. Follow this checklist every time before taking a voltage reading. This routine prevents careless errors that could damage your multimeter or create a safety hazard.

Measuring DC Voltage Step-by-Step

DC voltage testing is the most common measurement beginners perform, and it's a good place to start learning. DC voltage is found in batteries, car electrical systems, phone chargers, and electronic devices. The process is straightforward once you've prepared your multimeter correctly.

First National Credit Card Login Information Guide →

First, identify where you want to measure. You need two points: one where you'll touch the red probe and one where you'll touch the black probe. In most DC circuits, the black probe goes on the negative side (ground or the negative terminal of a battery) and the red probe goes on the positive side. However, you can touch the probes to any two points in the circuit; the reading will tell you the voltage difference between them.

For your first practice, use a battery you know is good. A AA battery should read close to 1.5 volts. A 9-volt battery should read close to 9 volts. A car battery should read between 12.5 and 14.5 volts when the engine is off. Set your multimeter to DC voltage, choose the 20V range, and touch the black probe to the negative terminal and the red probe to the positive terminal. The display will show a number very close to the battery's rated voltage. If the number is significantly lower—for example, a AA battery reading 0.8 volts instead of 1.5 volts—the battery is wearing out.

When measuring voltage in a circuit (not just a battery), identify what you're testing. Look for component datasheets or service manuals that show where to measure and what voltage to expect. For example, if you're testing a car's alternator, you might measure the voltage at the battery terminals while the engine runs. A good alternator should produce 13.5 to 14.5 volts. If you measure