How to Use a Diamond Tester Correctly

Understanding What a Diamond Tester Is and How It Works

A diamond tester is a handheld electronic device designed to distinguish diamonds from other gemstones and diamond simulants. The most common type uses thermal conductivity testing, which measures how quickly heat moves through a stone. Diamonds conduct heat approximately four times faster than cubic zirconia, moissanite, and most other diamond look-alikes. This difference in thermal properties forms the scientific basis for how these devices function.

Get Your Free Nursing Home Legal Guide →

The device works by placing a metal tip against the surface of a gemstone. Inside the tester, a heating element warms up to a specific temperature, usually around 65 degrees Celsius (150 degrees Fahrenheit). When the tip contacts the stone, heat transfers into it at different rates depending on the material. The tester measures this heat transfer speed and displays a reading on a digital screen or through light indicators. If the heat dissipates rapidly—indicating high thermal conductivity—the device registers a positive diamond reading. If heat moves slowly through the stone, the tester indicates it is likely not a diamond.

Modern diamond testers are increasingly sophisticated. Some models feature LED screens that show numerical readings, while others use color-coded lights (typically green for diamond, red for non-diamond). Premium models may include additional testing features and higher accuracy rates. Prices range from approximately $20 to over $300, depending on brand reputation and technological features.

It is important to understand that thermal conductivity testing works well for distinguishing diamonds from many simulants, but it has limitations. Moissanite, a lab-created gemstone that closely resembles diamonds, conducts heat in ways that can sometimes produce ambiguous results on certain testers. Some advanced diamond testers now include additional testing methods to address this issue, such as electrical conductivity measurements that can better differentiate between diamonds and moissanite.

Practical Takeaway: Diamond testers rely on measuring how fast heat moves through a stone. Understanding this basic principle helps you recognize why results can vary and why proper technique matters when using these devices.

Preparing Your Diamond Tester and Gemstone for Testing

Before testing any gemstone, your diamond tester must be in proper working condition. Start by checking the battery. Most diamond testers use standard AA, AAA, or coin-cell batteries. A weak battery can produce inaccurate results, so replace the battery if the device has not been used in several months or if readings seem inconsistent. Refer to the manufacturer's manual for the specific battery type your model requires. After inserting a new battery, allow the device to warm up for the time specified in your manual—typically 30 seconds to 2 minutes.

Get Your Free Nissan Rogue Oil Change Guide →

Calibration is a critical step that many people overlook. Most diamond testers include a calibration feature that resets the device to a baseline measurement. To calibrate, press and hold the calibration button (usually located on the device's side or bottom) while holding the metal tip in the air, away from any surface. The device will emit a beep or light indicator when calibration is complete. Some testers calibrate automatically when powered on. Always refer to your specific model's instructions, as calibration procedures vary. Testing without proper calibration can lead to false readings.

The gemstone being tested must be clean and free of oils, dirt, and debris. Clean the stone using a soft, dry cloth or lens cleaner specifically designed for gemstones. Any residue on the surface can interfere with thermal conductivity and produce misleading results. If the stone is in a setting, you may still be able to test it if the top facet is exposed and accessible. However, metal settings can conduct heat differently than the stone, so testing a loose stone whenever possible produces more reliable results.

The testing environment also matters. Extreme temperatures can affect your diamond tester's accuracy. Test stones at room temperature, ideally between 65 and 75 degrees Fahrenheit (18 to 24 degrees Celsius). Avoid testing immediately after the stone has been in sunlight, in a cold environment, or near heat sources. Allow any stone that has been exposed to temperature extremes to return to room temperature before testing. Additionally, ensure your hands are clean and dry when holding the tester and stone.

Practical Takeaway: Proper preparation involves checking your battery, calibrating your device, cleaning the gemstone, and ensuring a neutral room temperature. These steps take just a few minutes but significantly improve result accuracy.

The Step-by-Step Testing Process

Begin the testing process by holding the diamond tester comfortably in one hand with a steady grip. Use your other hand to hold the gemstone securely on a stable surface, such as a table or cushion. This prevents accidental movement during testing, which can affect readings. Position the stone so that the top facet (the flat surface) faces upward and is easily accessible. For loose diamonds, this is straightforward. For stones in jewelry settings, you may need to position the piece so the stone's top is exposed.

Understanding Common Causes Of Tummy Pain →

Press the power button to activate the tester. The device will begin its warm-up sequence and typically display a light or sound indicating it is ready for testing. When the ready signal appears, gently place the metal tip of the tester flat against the top facet of the gemstone. Apply gentle, consistent pressure—approximately the weight of a ballpoint pen. Do not press hard or jab the stone. Excessive pressure can damage both the tester's tip and potentially scratch the gemstone.

Maintain contact between the tip and the stone's surface for the duration indicated in your device's manual, usually between 2 and 5 seconds. Keep the tester still and allow it to complete its measurement. During this time, heat is transferring from the tester's tip into the stone. Some devices produce a beeping sound or flashing light when the measurement is complete; others display a result immediately. Different tester models have different signaling methods, so familiarize yourself with your specific device's indicators.

When the measurement is complete, lift the tester away from the stone. Observe the result displayed on the screen or through color-coded indicators. Most testers show a clear result within seconds of removing the tip from the stone. Write down the result immediately, as the display may clear or reset. For thorough testing, repeat the process at least two or three times on different facets of the stone. This provides multiple data points and helps confirm the result. If all tests show consistent readings, you have a reliable indication of the stone's thermal conductivity properties.

Practical Takeaway: Test by gently pressing the tip against the stone's top facet, holding it steady for the required duration, then lifting away and recording the result. Perform multiple tests for consistent, reliable readings.

Interpreting Results and Understanding Limitations

Diamond testers display results in different formats depending on the model. Some show numerical values, others use colored lights or LCD readouts. Generally, a positive result (indicated by green light, a "pass" message, or a high numerical reading) suggests the stone has thermal conductivity consistent with a diamond. A negative result (red light, "fail" message, or low numerical reading) suggests the stone may be a simulant such as cubic zirconia, glass, or synthetic materials. However, interpreting results requires understanding what these readings actually indicate.

Get Your Free Hy-Vee Gas Information Guide →

A positive diamond test result means the stone conducts heat at a rate similar to a diamond. This is valuable information, but it does not constitute absolute proof of authenticity. A positive result indicates the stone is not cubic zirconia or many common diamond simulants, but it does not rule out all possibilities. Most importantly, diamond testers cannot distinguish between natural diamonds, lab-created diamonds, and treated diamonds—all of which have identical thermal conductivity. If you need to determine whether a stone is natural or lab-created, you require additional testing through a professional gemological laboratory.

Moissanite presents the most significant challenge for diamond testers. Moissanite is a lab-created gemstone with thermal properties very similar to diamonds. Some older diamond tester models may produce ambiguous or positive results when testing moissanite. Newer advanced testers designed specifically to address this issue incorporate electrical conductivity testing in addition to thermal testing. Moissanite conducts electricity, while diamonds do not. Testers with this dual-testing capability can differentiate between the two materials more reliably. If you suspect a stone might be moissanite and your tester produces an unclear result, professional gemological testing offers definitive answers.

Environmental and user-related factors can also affect results. Testing a stone immediately after it has been exposed to heat or