How to Reset Your Hyundai Tire Pressure System

Understanding Your Hyundai Tire Pressure Monitoring System

The Tire Pressure Monitoring System (TPMS) is a safety feature found on virtually all Hyundai vehicles manufactured after 2007. This system uses sensors attached to each wheel to continuously monitor tire pressure and alert you when something is wrong. According to the National Highway Traffic Safety Administration, properly inflated tires improve fuel efficiency by up to 3 percent and extend tire life significantly.

"Free Guide to ChatGPT Plus Subscription Options" →

Your Hyundai's TPMS works by measuring the air pressure in each tire and sending that information wirelessly to your vehicle's onboard computer. When pressure drops below or rises above the manufacturer's recommended range, the system triggers a warning light on your dashboard. This light typically appears as an exclamation mark inside a tire symbol. The warning indicates that at least one tire has lost or gained significant pressure—usually a 25 percent change from the recommended PSI (pounds per square inch).

There are two main types of TPMS sensors used in Hyundai vehicles: direct sensors and indirect sensors. Direct TPMS uses physical sensors mounted inside each tire that measure actual pressure readings. Indirect TPMS estimates tire pressure by monitoring wheel speed sensors and comparing tire rotation patterns. Most Hyundai vehicles use direct TPMS, which provides more accurate readings and faster alerts.

Understanding how your system works helps you recognize when a reset is necessary. A reset becomes useful when you've adjusted tire pressure due to temperature changes, replaced tires, or performed wheel rotations. The system may retain old pressure readings, requiring you to reset it so it recalibrates to your current tire pressure levels.

Practical Takeaway: Check your vehicle's owner manual to determine whether your specific Hyundai model uses direct or indirect TPMS, as the reset process may vary slightly between systems.

When to Reset Your Tire Pressure System

Several situations warrant resetting your Hyundai's TPMS. The most common reason occurs after seasonal weather changes. During winter months, tire pressure naturally drops as cold temperatures reduce air volume inside tires. Studies show that tire pressure decreases approximately 1 PSI for every 10-degree Fahrenheit drop in temperature. Conversely, summer heat increases pressure. After adjusting tire pressure to match seasonal conditions, a reset tells your system to recognize these new readings as normal.

How to Replace Your Delta Shower Cartridge →

Tire replacement also requires a TPMS reset. When you install new tires, the sensors in those tires may have different calibration points than your old ones. Additionally, if you replace just one or two tires instead of all four, the pressure readings will differ across your vehicle. A reset allows your system to recalibrate and establish new baseline measurements for all four wheels.

Wheel rotation is another common trigger for resetting. Many drivers rotate their tires every 5,000 to 8,000 miles to promote even wear. During rotation, the tire pressure may be adjusted, and tires move to different positions on the vehicle. Your TPMS system may become confused about which sensor corresponds to which wheel position, especially in indirect systems. A reset realigns the system with the new tire positions.

Sometimes the TPMS warning light stays on even after you've properly inflated all tires to the correct pressure. This situation indicates that the system needs calibration. The light may also activate if you've used your spare tire or if one of your sensors has malfunctioned. In these cases, a reset often resolves the problem without requiring professional service.

You should also consider resetting after visiting a tire shop for any service, as technicians may adjust pressure or disturb sensors during their work. If you've added or changed wheel covers, installed new wheels, or made any modifications to your tire setup, a reset ensures your TPMS operates accurately with your current configuration.

Practical Takeaway: Keep a record of your vehicle's recommended tire pressure, which is listed on a sticker inside the driver's door jamb or in your owner's manual. This information helps you determine whether a reset is truly needed.

Locating the Tire Pressure Reset Button

The location of the TPMS reset button varies depending on your Hyundai model year and trim level. In most Hyundai vehicles manufactured between 2007 and the present, the reset button is located beneath the steering wheel on the dashboard. To find it, sit in the driver's seat and look at the lower left portion of the dashboard, just below where the steering wheel attaches. The button is typically small, about the size of a pencil eraser, and may be recessed into the dashboard panel.

Get Your Free Guide to Finding Fiat Dealers →

Some Hyundai models place the reset button in different locations. In certain years, you might find it on the left side of the steering column, integrated into the instrument panel housing. On other models, particularly newer versions, the button may be located on the center console near the gear shift or on a separate panel to the left of the steering wheel. If you have difficulty locating the button in your vehicle, consult your owner's manual, which includes a diagram showing the exact button location for your specific model.

In some recent Hyundai vehicles, particularly those with touchscreen infotainment systems, the TPMS reset function is accessible through the onboard menu system rather than a physical button. These vehicles allow you to access settings through the instrument cluster display or the central touchscreen. You would navigate to the vehicle settings or maintenance menu and select the tire pressure reset option from there.

If you cannot locate a reset button after checking your manual, your vehicle may use an alternative reset method. Some Hyundai models require you to turn the ignition to the "On" position without starting the engine, then use the steering wheel controls or dashboard buttons to navigate to the TPMS reset function. Other vehicles reset automatically after driving for a certain period at highway speeds once tire pressures have been adjusted.

When searching for the button, avoid confusing it with other dashboard buttons. The TPMS reset button typically has a tire symbol on it or is clearly labeled "TPMS" or "Tire Pressure." It is not the same as the tire pressure warning light, which appears on your dashboard when there's a problem.

Practical Takeaway: Take a photo of your reset button location once you find it, so you can quickly locate it again during seasonal pressure adjustments or after tire service.

Step-by-Step Reset Process for Direct TPMS Systems

Resetting a direct TPMS system in your Hyundai follows a straightforward process that typically takes fewer than five minutes. First, ensure all four tires are properly inflated to the pressure recommended by your vehicle manufacturer. This information appears on a sticker inside your driver's side door jamb and is also listed in your owner's manual. Use an accurate tire pressure gauge to check each tire, including the spare if applicable. Inflate or deflate tires as needed to match the recommended PSI exactly.

Get Your Free Chicago Car Emissions Guide →

Once your tires are at the correct pressure, sit in the driver's seat with the engine off. Locate the TPMS reset button using the guidance from the previous section. Press and hold this button for approximately three to five seconds. You should see the TPMS warning light on your dashboard blink or flash, indicating that the system is beginning its reset process. Do not release the button during this flashing sequence.

After the light stops blinking—which usually takes about ten seconds—you can release the button. The system is now in the process of recalibrating itself to the new tire pressures. Some vehicles will turn off the TPMS warning light immediately after the reset is complete. Others may require you to start the engine and drive the vehicle for several minutes to complete the recalibration process.

If your warning light remains on after attempting the reset, turn off your engine and wait a few minutes before trying again. Sometimes the system needs a moment to process the reset command. If the light persists after a second attempt, there may be an issue with one of your sensors or with the system itself. In this case, professional diagnostic service from a Hyundai dealer or certified mechanic would be beneficial.

For vehicles with touchscreen-based TPMS systems, the process differs slightly. Start your engine and look for a settings menu on your infotainment display. Navigate to vehicle settings, maintenance, or tire pressure options using the touchscreen or steering wheel controls. Select the TPMS reset or calibration option and confirm your selection. The system will process the reset while displaying a progress indicator.