How to Replace Your LG Water Filter

Understanding Your LG Water Filter and Why Replacement Matters

LG refrigerators equipped with water dispensers and ice makers rely on water filters to remove contaminants, odors, and sediment from tap water. These filters work by passing water through activated carbon and other filtration media that trap particles and chemicals. Over time, the filter becomes saturated and loses its effectiveness. According to LG's manufacturer guidelines, most water filters should be replaced every six months, though this can vary based on your water quality and usage patterns.

Free Guide to Growing Amaryllis Plants Indoors →

The filter in your LG refrigerator serves a critical function in maintaining water quality for drinking and ice production. When a filter reaches the end of its life, it may no longer effectively remove chlorine, lead, or other contaminants. You might notice changes such as water that tastes different, flows more slowly, or appears slightly cloudy. Some LG models include filter replacement indicator lights that change color or display messages when replacement is needed.

Understanding the specific model of your LG refrigerator is essential before beginning replacement. LG produces several filter types, including LT500P, LT600P, ADQ36006101, and LFXS26973S models, among others. Each model has different dimensions and connection types. Replacing a filter is a straightforward task that most homeowners can complete without professional assistance, typically taking less than 10 minutes.

Practical Takeaway: Before replacing your filter, locate your refrigerator's model number, usually found on a sticker inside the refrigerator or in your user manual, and note when you last replaced the filter to establish a replacement schedule.

Locating Your Filter and Gathering Necessary Materials

LG refrigerators house their water filters in one of two primary locations: inside the refrigerator compartment or underneath the refrigerator in the base grille area. Most French-door and side-by-side models keep the filter inside the fridge, typically in the upper right corner behind the crisper drawers or in a dedicated compartment. Bottom-freezer models often place filters in a housing unit accessible from the front base of the refrigerator. Some specialty or older LG models may have filters located in the back of the unit or behind the kickplate.

Learn About Trigonometry and Calculating Angles →

To locate your specific filter, consult your refrigerator's user manual, which contains diagrams showing the exact position. Many LG customers also find the model-specific information on LG's website or YouTube channels that display step-by-step visual guides. Once you know where your filter is located, you'll need to gather a few simple materials before beginning the replacement process.

The materials required for filter replacement are minimal and likely already in your home. You will need a new replacement filter compatible with your LG model, a small bowl or towel to catch any residual water that may spill during removal, and optionally a flashlight if your filter location is difficult to see. Having a step stool or small ladder nearby can help if you need to reach filters located in upper compartments. The replacement filter should be purchased from LG, authorized retailers, or verified third-party manufacturers that meet LG specifications.

When purchasing a replacement filter, verify the part number matches your refrigerator model. A filter designed for one LG model may not fit another model correctly. Prices for LG water filters typically range from $40 to $80 depending on the specific type and where you purchase it. Some retailers offer multi-packs at discounted rates, which can be practical if you plan multiple replacements over time.

Practical Takeaway: Obtain your replacement filter before starting the removal process, and place a towel under or near the filter housing to prevent water damage to your kitchen floor.

Step-by-Step Filter Removal Process

Removing your LG water filter requires following a specific sequence to prevent water leaks and damage. The first step is to turn off the water supply to your refrigerator if your model has a dedicated shut-off valve. Not all LG models have this feature, but if yours does, it's typically located behind or underneath the refrigerator where the water line connects. Turning off the water supply before removal prevents water from continuing to flow into the old filter during the removal process.

Free Guide to Eliminating Fruit Flies at Home →

For filters located inside the refrigerator compartment, you may need to remove crisper drawers or access panels to reach the filter. Typically, these filters are housed in a cylindrical or cartridge-style container. To remove the filter, you'll turn it counterclockwise, usually by a quarter turn to a half turn, depending on the design. Some models use a release button or lever that you press before turning. As you turn, water may drip out, which is why the towel placement is important. Once the filter rotates freely, carefully pull it straight out of its housing.

Filters located in the base grille area of your refrigerator follow a similar removal pattern. You may need to remove the front grille or kickplate by pressing release tabs or removing a few screws. Once you have access to the filter compartment, you'll see the cylindrical filter. Rotate it counterclockwise and pull straight out. Some base-mounted filters are designed to twist off completely from their housing, while others slide out after a partial rotation.

As you remove the old filter, residual water trapped inside may spill onto your towel. This is normal. After complete removal, you may notice the filter's condition. A filter that has been in use for six months will typically appear darker than a new one, sometimes almost black or dark brown. This discoloration indicates that the filter has been actively removing contaminants from your water. Empty the water that has accumulated in your collection bowl and dispose of the old filter in regular household trash, as water filters are not considered hazardous waste in most jurisdictions.

Practical Takeaway: Take a photo of the old filter's position and the surrounding area before removal, so you have a reference for installing the new filter correctly.

Installing Your New Water Filter

Installing a new water filter in your LG refrigerator is straightforward once you've removed the old one. Before inserting the new filter, remove any protective caps or seals from the filter. These caps protect the filter during shipping and storage but must be removed before installation. Some new filters come with a protective plastic housing; inspect yours to ensure you've removed all protective materials. The inlet and outlet ports on the new filter should be clearly visible and free of obstruction.

Free Guide to Making Homemade Potato Chips →

Hold the new filter at the same angle and position where the old filter was located. If your filter compartment is inside the refrigerator, you'll typically hold the filter horizontally, aligned with the cylindrical opening. If it's in the base unit, the orientation may differ. Carefully insert the filter into the housing, pushing it straight in until it makes contact with the internal connector. Once the filter is fully inserted, rotate it clockwise. You'll feel slight resistance as the filter's threads engage with the housing. Continue rotating until the filter is snug, typically a quarter to half turn. Do not over-tighten, as this can damage both the filter and the housing threads.

Some LG models feature a click or stop point that indicates proper installation. If you reach this point, stop rotating and do not force the filter further. The filter should feel secure but not extremely tight. If you feel significant resistance or cannot rotate the filter, remove it and check for any misalignment or protective material that might still be in place. Reinstall the filter only after confirming the pathway is clear.

After the new filter is installed and secure, replace any removed compartment panels, crisper drawers, or grille sections. If your refrigerator model includes a filter replacement indicator light, it may reset automatically when you successfully install the new filter. Some models require manual reset by pressing a button or holding a combination of buttons for several seconds. Check your user manual for the specific reset procedure for your model. Turn the water supply back on if you shut it off previously, and run water through the dispenser for 2 to 3 minutes to flush the new filter before consuming the water.

Practical Takeaway: Keep the receipt or packaging of your new filter with the installation date written on it, so you can track when your next replacement is due.

Flushing and Testing Your New Filter

After installing a new water filter, flushing it thoroughly is an important step that many people overlook. When a new filter is manufactured and packaged, it contains activated carbon dust and sediment that must be removed before drinking the water. This dust is harmless but can

How to Use Apple Pay for Money Transfers →