A chainsaw chain is a loop of metal links with cutting teeth that rotates around the guide bar at high speed to fell trees and cut wood. The chain itself consists of three types of links: cutting teeth (which do the actual work), drive links (which fit into the guide bar's groove), and tie straps (which connect everything together). Understanding these components helps you recognize when your chain needs replacement rather than just sharpening.
Learn About Paying Your FGUA Bill Online →
Most homeowners don't realize that chainsaw chains don't last forever, even with regular maintenance. A typical residential chain can cut through 50 to 100 cords of wood before showing significant wear, though this varies dramatically based on what you're cutting. Softwood like pine allows a chain to last longer than hardwood like oak or maple. Dirty wood—logs that have fallen in soil or sand—dulls chains much faster because abrasive particles embed in the wood fibers.
Several signs indicate your chain needs replacement rather than just sharpening. If you're constantly having to touch up the teeth every few hours of cutting, the chain has likely reached the end of its useful life. Chains that have broken or missing teeth obviously need replacement. A chain that pulls to one side despite repeated sharpening of both sides suggests that some teeth are damaged or worn unevenly. If the chain no longer holds tension properly—it keeps falling loose even after you tighten it—the drive links have probably stretched beyond the point where adjustment can compensate.
Cost matters when deciding whether to replace or repair. A new replacement chain typically costs $30 to $80 depending on the bar length and the brand. Professional sharpening costs $15 to $25. If you're spending more than $15 to $20 on sharpening every other month, replacement often makes financial sense. The takeaway here: inspect your chain regularly for signs of damage, track how often you're sharpening, and don't waste money trying to rehabilitate a chain that's truly worn out.
Before you can buy a replacement chain, you need to know three specific measurements about your saw: the guide bar length (measured in inches from the tip of the bar to where it enters the body of the saw), the pitch (the spacing between drive links, usually .325", .375", or .404"), and the number of drive links (the count of links in the entire loop). Getting any of these measurements wrong means the chain simply won't fit your saw, no matter how hard you try.
Free Guide to Pay by Plate Illinois Billing →
Finding this information requires checking three sources: your owner's manual (the most reliable), the saw itself (most manufacturers stamp specifications on the bar or body), or the retailer where you purchased the saw. If you can't locate your manual, most manufacturers post them online as PDF files—a quick search for "[your brand] [your model number] manual" usually works. Write down the exact model number from your saw before searching online; this ensures you get instructions for your specific machine.
Pitch is the trickiest specification for beginners because it's measured in fractions that seem arbitrary. The pitch is half the distance between three consecutive rivets on the drive links. Most common residential saws use .325" pitch, which represents a good balance between cutting speed and durability. Larger saws or professional-grade equipment often use .375" or .404" pitch. Attempting to install a chain with the wrong pitch will result in the chain either fitting too loosely (and falling off) or not fitting the bar groove at all.
Drive link count tells you how many links complete one full loop around your bar. This number varies by bar length and pitch combination. A 16-inch bar with .325" pitch typically has 55 drive links, while an 18-inch bar with the same pitch uses 62 links. Installing a chain with too few links leaves gaps in the bar, while too many links either won't close properly or stretch the mechanism. Online retailers usually display this information clearly, often with a dropdown selector that shows compatible chains based on your bar length and pitch once you select those specifications.
Practical takeaway: Locate and record your chainsaw's model number, guide bar length, pitch, and preferred drive link count before shopping for a replacement chain. Many online retailers have search functions that walk you through entering these specifications step-by-step, automatically filtering out incompatible options. This prevents purchasing a chain that won't work with your saw.
Replacing a chainsaw chain requires surprisingly few tools, and most are common items you likely already have. You need a wrench or socket that fits the nuts holding your bar and sprocket assembly (typically 10mm, 12mm, 13mm, or 17mm depending on your saw), a screwdriver (Phillips or flathead depending on your model), and your new replacement chain. Some saws have a built-in sprocket wrench molded into the body, which eliminates the need for a separate tool. Check your manual or look around the saw's body to see if this feature exists on your model.
Free Guide to Mold Removal Methods for Walls →
Beyond tools, you need a clean, flat work surface with good lighting. Chainsaw chains have dozens of small metal links with sharp teeth—dropping a link into grass or gravel means spending 20 minutes searching. A workbench, picnic table, or sturdy shop counter works perfectly. Set up a container (a small box or tray) to hold the nuts and small parts you'll remove; losing these fasteners means a frustrating trip to a hardware store to find matching replacements. Position a light source above your work area to illuminate the bar assembly.
Safety matters even when the saw is sitting still on your bench. Wear work gloves—the teeth on the chain are sharp enough to draw blood on unprotected hands. Position the saw so the bar extends over the edge of your table, giving you room to work without straining. This positioning also prevents the bar from resting on your body if you accidentally bump it. Never work on a chain when the saw is plugged in (for electric models) or has gas in the tank with the cap loose (for gas models).
Before disassembling anything, take a photo of the current chain's configuration using your phone camera. Specifically, photograph the bar from the side showing how the chain sits in the groove and how the tension adjustment mechanism is positioned. This reference image helps you remember the assembly order when putting everything back together, particularly the orientation of any springs or washers. The takeaway: prepare a clean workspace with proper lighting, gather your tools beforehand, wear gloves, and document the current setup with photos before you start removing anything.
The process begins by loosening the bar nuts that hold your guide bar and sprocket to the saw body. Most chainsaws have two nuts (one on each side), though some models have three. These nuts typically require a specific wrench size; if you're unsure which size fits, try different sizes gently—the correct size will seat fully on the nut without wobbling. Loosen these nuts about one-quarter turn; don't remove them completely yet, as they help prevent parts from falling and getting lost.
How to Delete Your Fitbit Account Guide →
Next, locate your chain tension adjustment mechanism. This is usually a small screw or bolt on the side of the bar, often near where the bar connects to the saw body. Turning this adjustment clockwise loosens the chain; counterclockwise tightens it. You're looking to create enough slack so the chain can come off the bar and sprocket freely. Loosen this adjustment until the chain hangs slightly loose on the bottom of the bar. At this point, you should be able to pull the chain away from the bar by hand.
Now remove the bar nuts completely and set them in your parts container. Gently lift the guide bar and chain assembly away from the saw body, being careful not to drop it. The bar itself is heavy and has sharp teeth all around it, so support it firmly with both hands. As you lift, the chain will likely still be engaged with the sprocket; continue lifting slowly until the chain disengages completely. If it resists, you may need to loosen the tension adjustment a bit more. Once separated, place the bar and old chain on your clean work surface.
With the bar removed, you can now take the old chain off. Locate the master link—a special connecting link that's usually marked or colored differently from regular links. This link often has a removable clip or spring that holds it together. Depress or remove this retaining device (consult your manual if you're unsure which link is the master link) and the chain will
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.