Your car's wing mirrors (also called side mirrors or door mirrors) take a beating. They stick out from your vehicle, making them vulnerable to parking lot collisions, careless door openings, and weather damage. Unlike your windshield or bumper, wing mirrors don't have much forgiveness when something goes wrong.
Learn About Paying Your FGUA Bill Online →
The most common damage patterns show up in predictable ways. Impact damage happens when another car clips your mirror while passing, or when you misjudge a tight parking spot. The mirror housing cracks, the glass shatters, or the mounting bracket bends. Weather damage occurs over time—sun exposure makes plastic housings brittle, and extreme temperature swings can crack glass or loosen internal components. Electrical issues affect power mirrors specifically; the motor that adjusts the mirror dies, or the wiring connection corrodes.
You'll know replacement is necessary when the glass has deep cracks (not just surface scratches), when the housing is cracked and water seeps inside, when the mirror won't stay in one position, or when you can see internal fog or condensation between the glass layers. A few small cracks at the edge might be drivable temporarily, but a large crack in your line of sight creates a safety hazard and typically fails vehicle inspections.
The decision between professional replacement and doing it yourself comes down to mirror type. Manual mirrors (the kind you adjust by hand) are straightforward to replace and take 10–20 minutes. Power mirrors with electrical components take longer and require you to disconnect wiring, adding 30–45 minutes. Heated mirrors add another layer of complexity. If your vehicle has cameras or sensors integrated into the mirror housing—increasingly common on modern cars—professional replacement might be the safer choice.
Practical takeaway: Examine your damaged mirror before deciding on replacement. Check whether it's manual or power (power mirrors have visible control switches on the door panel). If you're uncomfortable working with electrical connections, that's a legitimate reason to defer to a professional, not a reflection of capability.
The tools required for wing mirror replacement are basic and likely already in most garages. You'll need a screwdriver set (both Phillips and flathead), a socket wrench set or adjustable wrench for the mounting bolts, possibly a trim removal tool (a flat plastic tool designed to pry interior panels without scratching), and a flashlight. Some vehicles require a Torx screwdriver (star-shaped) instead of Phillips, so check your manual beforehand. You don't need anything specialized or expensive.
Free Guide to Pay by Plate Illinois Billing →
The replacement mirror itself is the bigger consideration. OEM (original equipment manufacturer) mirrors—the ones made by your car's manufacturer—typically cost $150–$400 per mirror depending on your vehicle. They match perfectly and come with all the right connectors for electrical components. Aftermarket mirrors from manufacturers like Dorman or TYC cost $80–$200 and work just as well for most vehicles, though fit and finish may vary slightly. Used mirrors from salvage yards run $40–$100 and are economical if you can find the right part for your model year.
The critical step is getting the correct part number. Never assume that all mirrors for your vehicle are identical. A mirror for a 2019 Honda Civic is different from one for a 2020 Civic. If your mirror had power adjustment, heating, or integrated cameras, buying a manual-only replacement won't work. Your vehicle's VIN (vehicle identification number) and model year are essential information. Call your car's dealership parts department with these details, or use online parts retailers like RockAuto or LKQ that let you filter by exact vehicle specifications.
Purchasing decisions matter for outcomes. OEM parts from a dealership ship slowly but guarantee compatibility. Online retailers like Amazon or eBay offer speed and lower prices but require careful verification that the listing matches your vehicle exactly. Salvage yards require legwork but offer the cheapest option—call ahead to confirm they have your part in stock before driving over.
Practical takeaway: Write down your vehicle's full year, make, model, and VIN before shopping for a replacement mirror. Include whether your current mirror is manual or power, heated or unheated. One wrong detail means ordering the wrong part and wasting time on returns.
Mirror removal begins inside your car, not outside. Open your door fully and look at the door panel—the interior plastic that covers the door frame. You'll see mounting bolts or screws securing the mirror to the door frame. These are typically located just above where your window controls sit, though some vehicles hide them behind small plastic trim pieces that pry off. This is where the flashlight becomes useful; you're looking into spaces without much natural light.
Free Guide to Mold Removal Methods for Walls →
Before touching anything, take a photo with your phone showing the mirror's current position and angle. Power mirrors remember where you adjusted them, and manual mirrors sit at whatever angle you left them. This reference photo saves you from having to readjust when the new mirror goes in. Photograph any visible wiring connections too, especially if you have a power mirror.
For manual mirrors, the removal is purely mechanical. Locate the bolts (usually three of them) and unscrew them. The mirror assembly will come free from inside. If your mirror has wiring for heating elements, take a photo of the connector before unplugging it. Most connections snap apart by hand with a gentle squeeze or pull on the connector's small tab.
Power mirrors require the same bolt removal but add an extra step. Before removing the bolts, locate the wiring harness connection point—usually a rectangular plug with multiple pins. Gently press the release tab and disconnect it. Some harnesses have a small piece of tape or a plastic clip holding them in place; remove these first. If the harness doesn't disconnect easily, don't force it; trace it back and look for a clip you missed. Once disconnected, remove the mounting bolts and the old mirror comes out.
You might encounter a third type: mirrors with a single central pivot point and side adjustment screws. These require removing side trim pieces first. Use your trim removal tool or a thin flathead screwdriver to gently pry at the trim edges, working slowly to avoid cracking plastic. Once removed, you'll see the bolts holding the mirror to the door frame, just like other types.
Practical takeaway: Don't rush the removal phase. Take photos of connections and the mirror's original position. Spend extra time identifying all fasteners before applying force, as hidden bolts are common and causing damage here means a bigger repair problem than just replacing the mirror.
Installation is essentially removal in reverse, but precision matters more going in than coming out. Start by positioning the new mirror's mounting bracket so the bolt holes align with the holes in your door frame. Before fully tightening, check the reference photo you took earlier. The mirror should sit at roughly the same angle as the old one. Once you're satisfied with the positioning, tighten the bolts firmly but not aggressively—over-tightening can crack the plastic housing.
How to Delete Your Fitbit Account Guide →
For power mirrors, the electrical connection comes next. Take the wiring harness from your new mirror (it may come taped to the mirror or coiled in the box) and guide it through the space between the door frame and door panel, following the path of the old harness. Connect the harness plug to the corresponding port on your car's door panel wiring. You'll hear or feel a small click when it seats fully. This is the moment to verify everything works before closing up the door panel.
Test the electrical function before reassembling everything. Roll down your window and cycle the mirror adjustment switches on your door. The mirror should move in all directions smoothly. If it doesn't respond, the connection may not be fully seated. Disconnect and reconnect the harness, paying close attention to the clip or latch that holds it in place. If you have a heated mirror, turn on the heating function (usually a button on the mirror control cluster) and place your hand near the mirror glass after 30 seconds to feel for warmth. No heat means the heating element didn't connect properly.
Manual mirror installation skips the electrical testing but adds a different verification step. Adjust the mirror through its full range of motion—up, down, left, right. It should move smoothly without grinding sounds or resistance. If movement feels stiff or incomplete, the mirror may not be seated correctly in
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.