How to Replace Struts: Essential Suspension Repair Guide

Understanding Your Vehicle's Strut System and Why Replacement Matters

Struts are a critical component of your vehicle's suspension system, and understanding how they work helps you recognize when replacement becomes necessary. A strut combines several parts into one unit: a shock absorber, a coil spring, and a mounting bracket that connects to your vehicle's steering knuckle. This integrated design allows your car to both absorb bumps in the road and maintain wheel alignment during turning.

Get Your Free Apple Music Family Plan Guide →

The suspension system serves two main purposes: keeping your tires in contact with the road for safety and comfort, and absorbing the energy from road irregularities to protect your vehicle and passengers. Struts specifically handle a large portion of this work on most vehicles manufactured after the 1980s. When struts wear out, your vehicle loses the ability to manage impact forces effectively, which can compromise both safety and ride quality.

Struts typically last between 50,000 and 100,000 miles, though this varies based on driving conditions, road quality, and vehicle weight. Rough roads, heavy loads, and aggressive driving accelerate wear. Regular inspection during routine maintenance can catch strut problems before they become dangerous. Signs of worn struts include excessive bouncing after hitting bumps, uneven tire wear, changes in handling response, or visible fluid leakage from the strut unit itself.

Understanding strut replacement costs money and requires mechanical skill or professional service. Many vehicle owners choose professional installation, which typically ranges from $400 to $1,200 per axle depending on vehicle make and model. Some experienced do-it-yourselfers tackle this repair themselves to reduce labor costs, though specialized tools and knowledge are necessary for safe completion.

Practical takeaway: Schedule a suspension inspection if your vehicle bounces excessively, pulls to one side, or has traveled more than 80,000 miles since the last strut service. Catching worn struts early prevents additional damage to wheels, tires, and alignment components.

Tools and Equipment You'll Need for Strut Replacement

Replacing struts requires specific tools that most casual mechanics don't have in their standard toolkit. The most essential specialized tool is a spring compressor, which safely removes tension from the coil spring before disassembly. This tool is absolutely necessary for safety—attempting to remove a spring without proper compression can result in serious injury, as the spring can release with tremendous force. Spring compressors cost between $50 and $200 to purchase or can be rented from most auto parts stores for $20 to $40 per day.

Learn About Homestead Exemption Status Information →

Beyond the spring compressor, you'll need a strut removal tool or special socket designed to fit the strut shaft nut. These specialized sockets are called "strut cartridge sockets" and typically cost $15 to $30. A basic socket set with metric sizes is essential, as most modern vehicles use metric fasteners. You'll also need a breaker bar or ratchet wrench, as the fasteners holding struts in place are often very tight and require substantial torque to loosen.

Safety equipment is equally important as mechanical tools. Invest in quality jack stands rated for your vehicle's weight—never rely solely on a hydraulic jack while working underneath a vehicle. Your vehicle weighs thousands of pounds, and using inadequate support can result in catastrophic injury. A floor jack lifts the vehicle, while jack stands prevent it from falling if the jack fails. Quality jack stands typically cost $60 to $150 per pair. Additionally, wear safety glasses to protect your eyes from rust particles and dirt, and use heavy work gloves to protect your hands from sharp edges.

Prepare your work area carefully. You'll need a level, hard surface—a concrete driveway is acceptable, though a garage provides better protection from weather. Lay out all tools before beginning work so you don't need to search while your vehicle is elevated on jack stands. Some mechanics use a torque wrench to ensure fasteners are tightened to manufacturer specifications, which costs $30 to $100 but significantly improves job quality.

Practical takeaway: Rent or borrow a spring compressor and gather all tools before lifting your vehicle. Attempting this repair without proper equipment creates serious safety hazards that can result in injury or property damage.

Step-by-Step Strut Removal Process

Begin by gathering your vehicle's repair manual or looking up specific information for your make and model, as strut configurations vary significantly between vehicles. Raise the vehicle using a floor jack positioned at the manufacturer's recommended lift points—these are typically reinforced areas along the frame marked in your owner's manual. Once the vehicle is elevated, place jack stands beneath the frame and lower the vehicle onto them. Remove the wheel and tire using a lug wrench, rotating counterclockwise to loosen the lug nuts before the vehicle is fully elevated.

Free Guide to Making Pie Dough at Home →

Locate the strut mounting points. Most vehicles have an upper mount inside the engine bay or beneath the hood area, and a lower mount that connects to the steering knuckle or control arm. Take photographs of the strut configuration before disassembly—these images provide reference during reassembly, preventing alignment errors. Disconnect the brake hose bracket if it's attached to the strut, being careful not to crimp or damage the hose. Some vehicles also have an anti-roll bar link attached to the strut that must be unbolted.

Remove the lower strut bolts that connect the strut to the steering knuckle or control arm. These bolts are often very tight and may require penetrating oil and patience to loosen. Use a breaker bar or impact wrench to break these fasteners free. Once loose, you can remove the bolts by hand. Next, remove the upper strut mounting bolts from inside the engine bay. These typically consist of three bolts arranged in a triangular pattern. Remove these fasteners completely and set them aside in an organized manner so you can reuse them with the new strut assembly.

Once all fasteners are removed, the strut assembly should pull free from the vehicle. If it feels stuck, check that you've removed all bolts and disconnected all brake or sensor components. Gently wiggle the strut assembly while pulling downward and outward to free it from the mounting points. On some vehicles, the strut may require slight rotation to clear surrounding components. Support the strut assembly with your hand as the final bolts are removed to prevent it from falling, which can damage nearby components or cause injury.

Practical takeaway: Take several photographs before disassembly, use penetrating oil on stubborn fasteners, and work slowly to avoid damaging brake lines or suspension geometry sensors. Rushed work during removal often causes complications during reassembly.

Disassembly, Spring Replacement, and Strut Cartridge Removal

With the strut assembly removed from the vehicle, you're ready to disassemble it completely. Using your spring compressor, carefully apply pressure to the coil spring to compress it evenly. Follow the compressor manufacturer's instructions precisely—improper compression creates dangerous imbalance that can cause injury when fasteners are removed. Compress the spring until it's tight enough that the bearing seat and upper isolator move freely from side to side without resistance. This typically requires compressing the spring about two to three inches, though this varies based on spring design.

Free Guide to Finding Your Correct Bra Size at Home →

Once the spring is properly compressed, remove the upper strut nut using your strut cartridge socket and breaker bar. This nut holds the entire upper mounting plate, bearing, and spring assembly together. With the nut removed, carefully slide the upper isolator, bearing, dust cover, and bump stop off the strut rod. These components sometimes stick due to rust or adhesive, so use gentle prying with a screwdriver if necessary. Inspect each component for cracks or deterioration—many mechanics replace these components while the strut is disassembled since they're exposed and wear occurs alongside the strut itself.

Remove the spring slowly and carefully by gradually releasing pressure on the spring compressor. Keep your hands clear of the spring as it decompresses, as sudden release can cause injury. Once the spring is fully released and accessible, slide it off the strut assembly. At this point, the strut rod stands alone and ready for cartridge removal or replacement. Some struts contain replaceable internal cartridges, while others use sealed designs requiring complete strut replacement. Check your vehicle's repair documentation to determine which applies to your vehicle.

If your struts use replaceable cartridges, use a specialized strut cartridge removal tool or a large wrench to loosen the bottom of the strut body where the cart