Canon Pixma printers come in dozens of variations, and the ink cartridges aren't interchangeable across all models. Before you even think about replacing a cartridge, you need to know exactly which Pixma model you own and which cartridge type it uses. This step prevents purchasing the wrong cartridge and wasting money.
Learn About Paying Your FGUA Bill Online →
The Canon Pixma line includes several families: the MG series (multifunction models for home and small office), the TS series (focused on photo printing), the TR series (designed for business documents), and the PRO series (for professional photo work). Within each family, individual model numbers matter tremendously. A Pixma MG3620 uses different cartridges than a Pixma MG2520, even though both are in the MG line.
You'll find your model number in three places: on a sticker on the back or bottom of the printer, in the printer's settings menu (usually accessible through the device's screen or computer software), or in your original purchase documentation. Write down this exact model number—you'll reference it repeatedly when ordering replacements.
Canon cartridges fall into two main categories: standard capacity and XL (extra large) capacity. Standard cartridges contain less ink but cost less upfront. XL cartridges hold roughly two to three times more ink, which means fewer replacement cycles over time. Some printers can use both types; others are designed for only one. Your printer's manual or the Canon website will specify which your model accepts. Canon also makes XXL cartridges for select professional models, which hold even more ink.
Within each capacity level, you'll encounter both color cartridges and black cartridges. Color cartridges in the Pixma line typically contain cyan, magenta, and yellow (CMY) in a single unit, or they come as separate cartridges depending on your model. Black (K) cartridges are separate. Some newer models use a five-cartridge system that includes a gray cartridge for improved photo quality. Understanding this setup prevents confusion when ordering replacements.
Practical takeaway: Locate your exact Pixma model number today and note whether your printer uses standard, XL, or XXL cartridges. Check your printer's manual or visit Canon's support page for your model to confirm the cartridge configuration. This information eliminates ordering mistakes.
Before opening your printer to access cartridges, you need to prepare it properly. A cold or improperly prepared printer can jam, damage the cartridge holder, or even harm the print heads. Preparation takes only a few minutes but makes the entire replacement process smoother.
Free Guide to Pay by Plate Illinois Billing →
Start by turning on your Pixma printer and allowing it to run through its normal startup sequence. This positions the cartridge holder to an accessible location and ensures the printer is ready for manual intervention. Leave the printer on during this step—don't turn it off until instructed. Most Pixma models automatically move the cartridge carriage (the component holding cartridges) to the center or right side of the printer when powered on.
Next, locate your printer's cartridge access panel. On most Canon Pixma models, this is the hinged cover on the top of the device. You'll recognize it by looking for a small latch or catch on the front or sides. Some models have the access panel on the front, particularly the TS and TR series. Open this panel gently and fully. Don't force it—if it resists, check for any remaining latches or locking mechanisms.
With the panel open, you'll see the cartridge holder positioned inside. The cartridges sit in color-coded slots, usually labeled with the cartridge color (cyan, magenta, yellow, black, and sometimes gray). On most Pixma models, you'll notice a small rubber or plastic cover over each cartridge slot. These protective covers prevent dust and debris from entering when cartridges are removed. Some models require you to press a release button or lever to access the cartridges; others allow direct access once the panel opens.
Before touching any cartridges, allow your printer to sit for 30 seconds with the access panel open. This brief pause lets any residual heat dissipate and ensures the cartridge area has reached room temperature. Working with warm cartridges or cartridge holders can affect print quality or cause installation issues. While waiting, prepare your workspace: clear a clean, flat surface near your printer and have paper towels or a lint-free cloth ready. Canon recommends working in a space without direct sunlight, as UV light can affect ink quality.
Practical takeaway: Power on your printer, locate and fully open the cartridge access panel, and wait 30 seconds before proceeding. Set up a clean workspace with paper towels nearby and ensure you have adequate lighting to see the cartridge slots clearly.
The cartridge removal process seems straightforward but involves specific techniques that protect both the printer and you. Incorrect removal can break the cartridge holder, rupture ink cartridges, or stain your hands and clothing with permanent ink.
Free Guide to Mold Removal Methods for Walls →
With your printer powered on and the access panel open, locate the cartridge you want to replace. If you're replacing all cartridges (recommended when you notice multiple colors running low), start with any cartridge—the order doesn't matter. If you're replacing only one color, find that specific slot. The slots are typically labeled with icons or color names printed directly on the printer body.
Look at the back of the cartridge you're removing. You'll see a small plastic tab or lever protruding from the cartridge. This is the release mechanism. Press this tab firmly but gently—you're not forcing it, just applying steady pressure. As you press, the cartridge will pop up or slide slightly away from its slot. The amount of movement varies by model; some cartridges pop up dramatically, while others shift just enough to grab.
Once the cartridge is slightly released, grasp it at the sides or top, never by the metal contacts or nozzle on the bottom. The metal contacts (usually visible as small copper or gold squares) link the cartridge to the printer's electrical system. Touching these can transfer oils from your skin and cause communication problems between cartridge and printer. The nozzle is where ink exits; pressing on it can damage the mechanism or release ink prematurely.
Pull the cartridge straight out and upward. Resist the urge to wiggle or rotate it. The cartridge is designed to slide straight out of its slot. As it fully exits, you'll likely see that the metal contacts are now exposed. Place the removed cartridge on your paper towels immediately, nozzle-side up, to prevent ink from leaking onto your workspace or hands. Old cartridges can still contain residual ink even if they're officially empty.
If you're replacing cartridges over time rather than all at once, never leave the cartridge slot empty for extended periods. Canon printers are designed to have all slots filled. Leaving a slot empty for more than a day can cause the remaining cartridges to dry out and may damage the print head. If you remove a cartridge and won't be replacing it immediately, insert a new cartridge before powering off the printer.
Practical takeaway: Press the release tab on each cartridge, grasp it at the sides (not the contacts or nozzle), and pull straight out. Place removed cartridges nozzle-up on paper towels immediately. Never leave cartridge slots empty for more than a few minutes.
Installing a new cartridge requires attention to specific details. Proper installation ensures that the cartridge communicates correctly with your printer, produces the right color output, and doesn't cause error messages or printing problems.
How to Delete Your Fitbit Account Guide →
Remove your new cartridge from its packaging and examine it briefly. You'll notice a protective plastic tape or cover on the cartridge's bottom—this tape seals the nozzle during shipping and storage. This protective seal must be removed before installation. Peel this tape away completely and discard it. Some cartridges have multiple pieces of tape; ensure you remove all of them. Forgetting to remove this tape is one of the most common reasons new cartridges don't work—the tape prevents ink from reaching the print head.
Hold your new cartridge at the same angle you removed the old one—gently tilted upward at the
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.