Before you start unscrewing anything or hunting for tools, it helps to know what you're actually installing. Ring doorbells come in several models, and each one has slightly different installation requirements. The Ring Video Doorbell (the standard wired model) needs to connect to your existing doorbell wiring. The Ring Video Doorbell Plus and Pro models also use wired connections but offer upgraded features like higher video resolution and expanded viewing angles. Then there's the Ring Video Doorbell (Battery) model, which operates on rechargeable batteries and requires no wiring at all—making it the choice for renters or people who don't have existing doorbell infrastructure.
Learn About Paying Your FGUA Bill Online →
The key difference between models affects what you'll need to do during installation. Wired models tap into your home's low-voltage doorbell circuit, typically operating at 16-24 volts AC. This is the same circuit that powered your old doorbell. Battery models bypass this entirely and rely on a rechargeable lithium battery that you charge like a phone. Neither approach is inherently "better"—it depends on your home's setup and your needs.
You'll also want to understand the Ring app's role. Once physically installed, your doorbell needs to connect to your home Wi-Fi network through the Ring app. The doorbell itself doesn't work without this connection—it won't record video, send alerts, or let you view your front door remotely. Ring requires a 2.4 GHz Wi-Fi signal (some newer models support 5 GHz, but 2.4 GHz is more reliable for IoT devices). If your Wi-Fi router is in the back of your house or basement, your doorbell might struggle to maintain a strong connection.
Practical takeaway: Check which Ring model you own, verify you have either existing doorbell wiring or plan to use batteries, and test your Wi-Fi signal near your front door before starting installation. This prevents wasted time troubleshooting connection problems after you've already mounted the hardware.
Ring's installation guide says you need just a screwdriver, but real-world installation often requires more. Collect these items before you begin: a Phillips-head screwdriver (the most common type for Ring doorbells), a voltage tester (crucial for wired models to confirm power is off), a drill with bits (you may need to create new mounting holes if your existing doorbell isn't in the right spot), a level, painter's tape (to mark where you'll drill), and a flashlight or headlamp (your porch probably isn't well-lit when you're working on it).
Free Guide to Pay by Plate Illinois Billing →
For wired installations, a voltage tester is non-negotiable. This battery-powered device costs $10-20 at any hardware store and tells you whether electricity is flowing through your doorbell wires. Installing a Ring doorbell on live wires is dangerous and can damage the device. Your voltage tester will have two probes you touch to the wires; if there's voltage present, it beeps or shows a light. If you can't locate your doorbell wiring or aren't comfortable working with electrical connections, this is the point to consider hiring an electrician—typically $100-300 for a doorbell installation.
If you're installing a battery model, your tool needs are simpler: just a screwdriver and a level. No voltage testing or wiring knowledge required. However, battery models do need a clear line of sight for your Wi-Fi signal, so test your Wi-Fi strength at your front door using your phone's Wi-Fi settings before committing to that location.
For any model, check your existing doorbell setup. Is there already a doorbell button on your porch? If so, locate the wires running from it (usually copper or colored twisted pairs running into your wall). Take photos of these wires and how they're connected. If you don't have an existing doorbell, you'll need to run new wires from your breaker box or transformer to your front door—this is a larger project that may warrant professional installation.
Practical takeaway: Gather your tools now and test your Wi-Fi signal before starting. For wired models, locate and photograph your existing doorbell wiring. This prep work prevents mid-installation trips to the hardware store or discovering your Wi-Fi doesn't reach your porch after you've already mounted the device.
Wired Ring doorbell installation begins with the power. If you have an existing doorbell, you'll be repurposing its wiring. First, go to your breaker box and locate the circuit that controls your doorbell—it's often labeled "doorbell" or "front door." Flip that breaker to the OFF position. Now go back to your existing doorbell and use your voltage tester on the wires. Touch one probe to each wire; the tester should show zero voltage. If it beeps or lights up, the power isn't actually off. Return to the breaker box and try another breaker. This step is vital for your safety.
Free Guide to Mold Removal Methods for Walls →
With power confirmed off, unscrew and remove your old doorbell from the wall. You'll see two wires connected to it—these are your doorbell wires. They're typically thin, low-voltage wires, not the thick wires carrying household electricity. Unscrew the wire terminals on your old doorbell to disconnect these wires. They'll fall loose or be held by a wire nut (a small plastic cap that twists off). Keep track of which wire was which if they're color-coded, but honestly, for doorbell wiring, the polarity usually doesn't matter—Ring doorbells work regardless of which wire goes where.
Now examine the hole where your old doorbell was. The Ring doorbell might fit this same hole, or it might require a different mounting position. Ring provides a mounting template (either printed with your device or available in the app) that shows where you should drill holes for the new doorbell's anchors. Use painter's tape to mark these locations on your porch or wall. If you're drilling into wood trim, a regular drill works fine. If you're drilling into brick, stucco, or stone, you'll need a masonry bit and possibly a rotary hammer for easier drilling. Pre-drill these holes slightly undersized so the included anchors grip properly.
Some homes have their doorbell transformer in an attic or garage rather than at the front door. If your existing doorbell wires only reach partway, or if you don't have existing wires at all, running new wire from the transformer to your front door is necessary. This typically involves drilling through exterior walls and running 18-gauge or 16-gauge doorbell wire along the wall or through conduit. This is the part of installation that stops most people—if your situation requires running new wire from scratch, professional installation is often worth the cost.
Practical takeaway: Turn off power at the breaker, confirm it's off with a voltage tester, and remove your old doorbell. If you have existing wires, great—you're ready to mount. If you don't, or if the wires don't reach, consult a professional rather than attempting to run new wiring yourself.
With wiring sorted (or with batteries confirmed charged for battery models), you're ready to mount the device. The Ring doorbell mounting bracket is a small metal or plastic piece that screws to your porch or wall. Position this bracket using your pre-drilled holes or the template Ring provides. Use your level to make sure it's straight—a crooked doorbell not only looks odd, it may not function properly since the motion sensor works best when level. Screw the mounting bracket securely into place; you want it tight enough that it doesn't move if you push on it, but not so tight that you crack the material you're mounting into.
How to Delete Your Fitbit Account Guide →
Next comes connecting your wires. On the back of the Ring doorbell, you'll see two wire terminals labeled with symbols or icons. For wired models, strip about a quarter-inch of insulation from each of your doorbell wires (if they're not already exposed), then insert them into these terminals and tighten the terminal screws. Tug gently on each wire to confirm they're not going to pull out. The Ring doorbell itself is now ready to attach to the bracket. Most Ring models slide or click onto the bracket; there's usually an audible click when they're fully seated. Don't skip this confirmation—an improperly seated doorbell can
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.