How to Disable Auto Start-Stop on Your Car

Understanding Auto Start-Stop Technology and Why Drivers Disable It

Auto start-stop is a fuel-saving feature found on many modern vehicles built since the early 2010s. The system automatically shuts off your engine when the car comes to a complete stop—such as at a red light or in traffic—and restarts it when you release the brake pedal or press the accelerator. Manufacturers introduced this technology to reduce fuel consumption and lower emissions. Studies show that in city driving with frequent stops, auto start-stop can improve fuel economy by 3 to 10 percent, depending on driving conditions and vehicle type.

Your Free La Crosse DMV Information Guide →

Despite its environmental benefits, many drivers choose to disable this feature for several practical reasons. Some experience jarring or rough restarts that create an uncomfortable driving sensation, particularly in older model years where the technology was less refined. Others report that the constant engine cycling causes increased wear on the starter motor and battery, leading to higher maintenance costs over time. Additionally, drivers in regions with extreme temperatures—very hot or very cold climates—sometimes find that auto start-stop reduces air conditioning or heating effectiveness during stops.

The feature is particularly noticeable in vehicles with traditional automatic transmissions, though it appears in some manual transmission cars as well. Luxury brands like BMW, Audi, Mercedes-Benz, and Jaguar were early adopters, while mainstream manufacturers including Ford, Chevrolet, Honda, Toyota, and Hyundai now include it across many models. Even some hybrid vehicles use variations of this technology, though hybrid systems manage it differently than standard gasoline engines.

Understanding why auto start-stop exists and how it functions helps you make an informed decision about whether disabling it makes sense for your driving habits. If you primarily drive on highways, the system rarely activates since you maintain constant speed. However, if you spend significant time in stop-and-go traffic, the feature cycles frequently, which is why urban drivers are most likely to notice its effects.

Practical Takeaway: Before disabling auto start-stop, observe how often it activates during your typical driving week. If you rarely encounter traffic or frequent stops, you may find the feature has minimal impact on your driving experience, and leaving it enabled could maintain your vehicle's fuel efficiency ratings.

Locating the Auto Start-Stop Disable Button or Switch

The physical location of the auto start-stop control varies significantly based on your vehicle's make, model, and year of manufacture. Most commonly, manufacturers place a dedicated button or toggle switch within easy reach of the driver's seat, typically on the dashboard, center console, or steering wheel. The button usually displays a symbol showing an engine with an arrow or the letters "A/S" or "ASS" to indicate auto start-stop functionality.

Learn About Elan Visa Card Online Account Access →

On many Ford vehicles, the auto start-stop button appears on the lower left side of the steering wheel or on the dashboard to the left of the steering column. Toyota and Lexus models often feature the control on the center console near the gear shift. BMW vehicles typically have the button integrated into the iDrive infotainment system or as a physical button on the steering wheel rim. Audi places its control in the drive select area or accessible through the virtual cockpit display. Hyundai and Kia generally position the button on the center console, while Chevrolet and GMC models commonly feature it on the turn signal stalk or dashboard panel.

If you cannot locate a physical button, check your vehicle's infotainment touchscreen display. Many newer cars integrate auto start-stop controls into the center display rather than including a separate hardware button. You would navigate through the main menu, settings, or vehicle setup options to find the toggle. Some vehicles display this in a "Driver Assistance" or "Comfort" settings submenu. Consult your owner's manual for the exact menu pathway, as touchscreen navigation varies considerably between manufacturers and model years.

A growing number of vehicles place the control on the steering wheel itself, either as a dedicated button or through voice command integration. For vehicles with steering wheel controls, look for buttons with the auto start-stop symbol on the left or right spoke. If your vehicle has voice command functionality through systems like Ford's Sync, GM's OnStar, or Toyota's Safety Sense, you may be able to disable auto start-stop by saying a specific voice command, though this varies by system and model year.

Hybrid and plug-in hybrid vehicles sometimes lack a visible auto start-stop disable button because their systems manage engine cycling as part of the hybrid powertrain operation. In these cases, you may not have a direct disable option, or the control appears only in the infotainment menu under hybrid-specific settings.

Practical Takeaway: Start your search in your vehicle's physical manual or digital owner's manual PDF, searching for terms like "auto start-stop," "engine auto off," "stop-start," or "idle-off." Most manufacturers provide clear diagrams showing button locations and menu pathways specific to your model year.

Step-by-Step Instructions for Disabling Auto Start-Stop

Once you have located the auto start-stop control, disabling the feature is typically straightforward and takes only a few seconds. The process differs slightly depending on whether your vehicle uses a physical button or a menu-based control system. For vehicles with a dedicated hardware button, simply press it once while the vehicle is parked or running. You should see a visual confirmation—usually an illuminated indicator light, a message on the dashboard display, or a change in the button's appearance—confirming that auto start-stop has been turned off.

Free Guide to Connecting a Keyboard to Your Computer →

Most vehicles display a notification on the instrument cluster or center display screen showing that the feature is now disabled. Some cars show the auto start-stop symbol with a line through it, indicating deactivation. This confirmation typically remains visible for several seconds before disappearing. On your next start of the vehicle, the auto start-stop system will remain disabled until you toggle it back on, as most vehicles remember your preference even after the engine restarts.

For vehicles with touchscreen-based controls, the process requires a few more steps. While parked with the engine running or in the "on" position without the engine running, access the main settings menu on your infotainment system. Navigate to the vehicle settings or driver assistance options, then locate the auto start-stop or engine auto-off setting. Highlight this option and select it to toggle off. Confirm the change when prompted. Exit the menu, and the setting should take effect immediately or on your next engine start, depending on your vehicle's design.

Some vehicles allow you to disable auto start-stop through steering wheel controls. If your car uses this method, locate the menu button on the steering wheel and press it to access the driver information display or settings menu. Use the arrow buttons on the steering wheel to navigate to the auto start-stop option and select it to disable. Again, look for a visual confirmation that the change has taken effect.

If your vehicle uses voice commands, you can often disable auto start-stop without looking at any controls. Simply activate your vehicle's voice command system by pressing the voice button on the steering wheel and saying something like "disable auto start-stop" or "turn off engine auto off." The system will confirm the action verbally and may display a message on the center screen. Voice command phrasing varies by manufacturer, so if your first attempt doesn't work, try variations like "deactivate stop-start" or consult your manual for the exact phrasing your vehicle recognizes.

An important note: disabling auto start-stop does not affect your vehicle's overall functionality, engine performance, emissions controls, or warranty coverage in most cases. Manufacturers design vehicles so that drivers can disable this feature without triggering any error codes or warning lights. However, if warning lights appear after attempting to disable the feature, this may indicate a malfunction in the auto start-stop system itself, separate from your manual disabling action.

Practical Takeaway: Write down the exact steps for your specific vehicle model once you complete the first disabling action. This takes only two minutes but provides a reference so you can quickly re-enable the feature if you choose to do so later, or easily remember the process if someone else drives your vehicle.

What Happens When Auto Start-Stop Is Disabled and Battery Considerations

Once you disable auto start-stop, your engine will continue running whenever you come to a stop, just as it did on vehicles manufactured before this technology became standard. At red lights and in traffic, you will notice the engine idling rather than shutting off. The slight vibration of an idling engine will return, which many drivers actually prefer to the abrupt restart sensation. Your engine's RPM gauge will show typical idle speed

How to Find Your Local DMV Appointment Options →