Skullcandy makes headphones in several different styles, and each one connects to your devices in different ways. Before you start pairing your headphones, it helps to know which connection method your particular model uses. Most modern Skullcandy headphones rely on Bluetooth wireless technology, but some older models or specialty versions might use wired connections with a 3.5mm audio jack or USB cables.
Learn About Paying Your FGUA Bill Online →
The reason this matters is that Bluetooth pairing works differently than plugging in a cable. With Bluetooth, your headphones and device need to "talk to each other" for the first time through a process called pairing. Once paired, they usually reconnect automatically when you turn them on near that device. A wired connection, by contrast, works the moment you plug it in without any setup process.
You can find out which connection type your Skullcandy headphones use by checking three places: the product box or manual that came with them, the official Skullcandy website (where you can search by model number), or by looking at the headphones themselves. Most Bluetooth models have a power button and sometimes a pairing button, while purely wired models won't have any buttons at all. If your headphones have a rechargeable battery, they're almost certainly Bluetooth.
The model number on your Skullcandy headphones is usually printed on the back of one ear cup or on the inside of the headband. Write this down or take a photo of it before you start looking up pairing information. Different Skullcandy lines—like Crusher, Hesh, Method, and Dime—have slightly different button layouts and pairing procedures, so knowing your exact model prevents confusion and wasted time.
Practical takeaway: Locate your headphone model number and check whether your headphones are Bluetooth or wired before starting the connection process. This five-minute step prevents most connection problems before they start.
The first time you connect Skullcandy Bluetooth headphones to a device, you need to put the headphones into pairing mode. This mode tells the headphones to broadcast their signal so nearby devices can find them. The process is similar across most Skullcandy models, though button locations vary slightly.
Free Guide to Pay by Plate Illinois Billing →
To enter pairing mode on most Skullcandy headphones, hold down the power button for several seconds—usually between 5 and 10 seconds. You'll typically hear a voice prompt that says something like "pairing mode" or see LED lights that flash in specific patterns. Some models have a separate pairing button (often smaller than the power button) that you press instead of holding the power button. Check your manual if you're unsure which button to use, as pressing the wrong one will just turn the headphones on or off instead of entering pairing mode.
While your Skullcandy headphones are in pairing mode, go to the device you want to connect (phone, tablet, laptop, or computer). Look for the Bluetooth settings menu. On iPhones, this is in Settings > Bluetooth. On Android phones, it's usually Settings > Connected devices > Bluetooth or Settings > Bluetooth and device connection. On Windows computers, go to Settings > Devices > Bluetooth and other devices. On Mac computers, click the Apple menu > System Preferences > Bluetooth.
Once you've opened Bluetooth settings on your device and turned Bluetooth on, your Skullcandy headphones should appear in the list of available devices. The name will usually be something like "Skullcandy Crusher," "Skullcandy Hesh," or the specific model name. Tap or click on your headphones' name to select them. The device will then complete the pairing process, which takes about 10 to 15 seconds. You should hear another voice prompt confirming the connection.
One common mistake people make is giving up too quickly. If your headphones don't appear in the list right away, stay in pairing mode for a full minute before trying something different. Sometimes it takes a few seconds for the device to search and find the headphones. If after a full minute your headphones still don't show up, turn off the headphones completely, then turn them back on and re-enter pairing mode.
Practical takeaway: Hold the power button until you hear a pairing mode announcement, then find your headphones in your device's Bluetooth settings menu and tap to connect. The entire process takes less than two minutes when done correctly.
After you've paired your Skullcandy headphones once, you won't need to go through that whole pairing process again. Instead, your headphones will remember your device, and your device will remember your headphones. The next time you turn on your Skullcandy headphones near that device, they should connect automatically within seconds. This is much faster than the initial pairing and requires no manual steps on your part.
Free Guide to Mold Removal Methods for Walls →
Automatic reconnection works because both devices store information about each other in their memory. Your headphones know the name and identification details of your phone, and your phone knows the same about your headphones. When your headphones turn on and scan for devices to connect to, they look for that specific phone first. If they find it and Bluetooth is turned on on your phone, the connection happens instantly.
However, this automatic reconnection only works if both devices are in range (usually within about 30 feet for Skullcandy headphones) and if Bluetooth is turned on on both devices. If you turn your headphones on but they don't reconnect after about 10 seconds, check that Bluetooth is actually enabled on your phone or device. Many people accidentally turn off Bluetooth without realizing it, then wonder why their headphones won't connect.
If your Skullcandy headphones keep trying to connect to the wrong device, you can manage which device they prioritize. Most Skullcandy headphones remember multiple devices and will try to reconnect to the last device you used them with. If you want them to connect to a different device, you'll need to either turn off Bluetooth on the old device or forget the connection in your headphones' settings. Some Skullcandy models have a button combination to clear all paired devices and start fresh, which involves holding down specific buttons for 10 to 15 seconds. Your manual will show the exact button combination for your model.
Another useful feature is that many Skullcandy headphones can stay connected to multiple devices at once. For example, you might have them paired with both your phone and laptop. They'll typically try to connect to whichever device you're using them with most recently, but you can manually reconnect to a different device by going into that device's Bluetooth settings and selecting your headphones from the list.
Practical takeaway: Once paired, your Skullcandy headphones will reconnect automatically when you turn them on. If they don't reconnect, check that Bluetooth is turned on on both devices and that they're close to each other.
Even when you follow all the steps correctly, connection problems can happen. The most common issue is that headphones simply won't appear in the device's Bluetooth list during pairing mode. Before assuming your headphones are broken, try these steps in order: First, make sure your headphones actually have battery. Many Skullcandy headphones won't enter pairing mode if the battery is dead or too low. Charge them for at least 15 minutes before trying again. Second, restart your device. This sounds basic, but restarting clears out temporary software issues that often block Bluetooth connections. Turn off your phone or computer completely, wait 10 seconds, then turn it back on.
How to Delete Your Fitbit Account Guide →
A third step is to "forget" any previous pairing attempts. If you tried to pair your headphones multiple times but it didn't work, your device might be remembering those failed attempts and refusing to try again. Go into your device's Bluetooth settings, find your Skullcandy headphones' name in the list (it might say "paired" or "connected"), and select the option to forget, unpair, or remove the device. Then try the pairing process again from the beginning. This gives your device and headphones a clean slate.
If your Skullcandy headphones were previously paired with another device, they might be stuck trying to reconnect
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.