Onn is Walmart's in-house electronics brand, and their wireless mice represent an affordable option for people looking to replace a wired mouse or upgrade their setup. Before you attempt to connect your Onn wireless mouse, it helps to understand what type of device you're working with and what to expect from the connection process.
Learn About Paying Your FGUA Bill Online →
Most Onn wireless mice use either a USB receiver (also called a USB dongle) or Bluetooth connectivity. The USB receiver model is the most common variant sold at Walmart locations and online. This small rectangular device plugs directly into your computer's USB port and creates a wireless connection with your mouse. The receiver typically has a range of about 30 feet in open space, though walls and obstacles will reduce this distance. Bluetooth models work differently—they connect directly to your computer's built-in Bluetooth radio without needing a separate receiver.
The batteries matter too. Most Onn wireless mice use either two AA batteries or two AAA batteries, depending on the specific model. Battery life typically ranges from three to six months under normal use, though this varies based on how often you use the mouse and your specific model's power settings. Some newer models include an indicator light that shows battery status, while older versions may not have this feature.
One practical consideration: check your computer before connecting. If you're using a laptop with limited USB ports, the USB receiver model takes up one of those ports permanently. If your computer doesn't have Bluetooth, you'll need the USB receiver version. Desktop computers with plenty of USB ports won't have this constraint, so either connection method works fine.
Takeaway: Knowing whether your Onn mouse uses USB or Bluetooth, and understanding the battery requirements, removes guesswork when you're ready to connect it.
The USB receiver setup is straightforward and requires no software installation on most Windows and Mac computers. Here's what the actual process looks like when you open the box and hold an Onn wireless mouse for the first time.
Free Guide to Pay by Plate Illinois Billing →
Start by inserting the batteries into your mouse. On the bottom of the mouse, you'll find a battery compartment cover—this is usually held in place by either a small latch or by sliding it backward. Open this compartment and insert the batteries according to the diagram printed inside. The polarity matters here; check that the positive (+) and negative (-) ends match the indicators in the compartment. Once the batteries are in, close the compartment securely. Many connection problems happen because people don't seat the batteries fully or insert them backward.
Next, locate your mouse's power button. On most Onn models, this is a small sliding switch or toggle on the bottom of the mouse near the battery compartment. Slide it to the ON position. You should see a light on the bottom of the mouse turn on, indicating that the device has power. If no light appears, double-check your batteries and make sure they're fresh—dead batteries are a common culprit here.
Now insert the USB receiver into an available USB port on your computer. For desktops, the ports are usually on the back of the tower, though many modern desktops have ports on the front panel too. For laptops, you'll find USB ports on the sides. After you plug in the receiver, most computers recognize it automatically within a few seconds. You might see a brief notification in the corner of your screen, or the computer may simply register the new device silently.
At this point, your mouse should work. Move it around and click the left button to test. If the cursor moves and responds to clicks, the connection is established. If nothing happens, try moving the mouse closer to the receiver—sometimes proximity issues cause recognition problems. The receiver needs a clear line of sight to the mouse, so if it's facing away or blocked by objects, the connection may not work properly.
Takeaway: The USB receiver setup typically works out of the box with no extra steps—just insert batteries, turn on the mouse, and plug in the receiver.
Bluetooth connection requires a few more steps than the USB receiver method, but it eliminates the need for a separate dongle. This works particularly well for laptop users who want to preserve USB ports for other devices.
Free Guide to Mold Removal Methods for Walls →
First, confirm that your computer has Bluetooth capability. On Windows computers, open Settings and look for "Bluetooth & devices" or "Bluetooth settings" depending on your Windows version. On Mac computers, go to System Preferences and select "Bluetooth." If you don't see a Bluetooth option, your computer may not have this feature, and you'll need to use the USB receiver model instead.
Insert batteries into your Onn mouse just as you would with the USB version. Then, locate the pairing button on the mouse. This is often a small button on the bottom or underside of the mouse, sometimes marked with a Bluetooth symbol. Press and hold this button for about 3 to 5 seconds until you see a light begin to flash on the mouse. The flashing light indicates that the mouse is in pairing mode and actively looking for a Bluetooth connection.
Immediately after activating pairing mode on the mouse, open your computer's Bluetooth settings and look for a "Pair new device" or "Add device" option. Within the pairing window, your Onn mouse should appear in the list of available devices. It might show up as "Onn Mouse" or with a model number like "Onn 100012345." Click on it to initiate the pairing. The process typically takes 10 to 20 seconds.
Once pairing completes, you should see the mouse listed under your connected devices in the Bluetooth settings. Move your mouse around to test functionality. The cursor should respond to movements and clicks just as it does with a USB receiver. If the mouse appears to connect but doesn't work, try turning it off and on again, or removing and reinserting the batteries to reset the device.
One note about Bluetooth range: wireless range for Bluetooth mice is typically shorter than USB receiver mice, usually around 30 feet in ideal conditions, but often closer to 20 feet in real-world scenarios. Walls and interference from other devices can reduce this range further. If you experience connection drops, move closer to your computer or check whether other Bluetooth devices nearby are creating interference.
Takeaway: Bluetooth setup requires accessing your computer's settings and putting the mouse in pairing mode, but once paired, the mouse works without any dongle taking up a USB port.
Even with straightforward setup, connection issues sometimes occur. Understanding the most common problems and their causes can help you resolve them without frustration.
How to Delete Your Fitbit Account Guide →
The most frequent issue is that the mouse doesn't respond at all after being plugged in or paired. Before assuming the device is defective, check your batteries first. Remove the battery cover and take out the batteries. Wait 30 seconds, then reinsert them, making sure they're in the correct orientation. A surprising number of connection failures trace back to dead or incorrectly installed batteries. If you have spare batteries available, swap them in to rule out battery issues completely.
If batteries aren't the problem, try the reset procedure. For USB receiver mice, unplug the receiver, wait 10 seconds, and plug it back in. For Bluetooth mice, turn off the mouse, wait 10 seconds, and turn it back on. These simple resets often clear temporary glitches that prevent proper communication between the mouse and receiver or computer.
Sometimes the cursor moves but responds slowly or erratically. This usually indicates a range or interference problem. Move the mouse closer to your computer and the USB receiver (if using one). Remove the mouse from areas near other wireless devices, microwave ovens, cordless phones, or routers that operate on the 2.4 GHz frequency—the same frequency that most wireless mice use. If slowing happens only in certain parts of your room, you've likely found an interference source.
For Bluetooth mice specifically, if the mouse pairs but then disconnects frequently, try these steps: go into your Bluetooth settings, find the Onn mouse in your list of paired devices, and select "remove" or "unpair." Then restart the pairing process from the beginning. Sometimes clearing old pairing information and re-pairing resolves connection stability issues.
If you're on a Windows computer and the mouse works for a few minutes then stops responding, check whether your computer's power
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.