How to Clear Up a Cloudy Pool Water Guide

Understanding Why Pool Water Becomes Cloudy

Cloudy pool water is one of the most common problems pool owners face. The cloudiness happens when tiny particles float in the water instead of settling to the bottom or being filtered out. These particles are usually so small that you cannot see them individually, but together they scatter light and make the water look murky or milky.

Learn About Travel Credit Cards and Rewards →

Several things cause cloudy water. Imbalanced chlorine levels are a primary culprit—if chlorine is too low, bacteria and algae can multiply and cloud the water. Poor filtration also contributes to cloudiness. When your filter is not working properly or is clogged, particles remain suspended in the water. Environmental factors matter too: heavy rain, dust storms, pollen, and debris from nearby trees can all introduce particles into your pool. Additionally, high calcium hardness levels (the amount of dissolved minerals in water) can cause a white, hazy appearance.

Sometimes cloudiness appears after you shock the pool or perform maintenance. This is actually normal and temporary—it usually clears within 24 hours as the filter does its job. However, persistent cloudiness that lasts longer than a day signals that something in your pool chemistry or filtration system needs correction.

Understanding the source of cloudiness is the first step toward fixing it. Different causes require different solutions. A pool with cloudy water due to low chlorine needs different treatment than one with filter problems. Taking time to identify what caused the cloudiness will save you money and get your pool clear faster.

Practical Takeaway: Before treating cloudiness, observe your pool. Did it happen after heavy rain? After you last added chemicals? Is the filter running? These details help pinpoint the actual problem.

Testing Your Pool Water Chemistry

The foundation of clear pool water is proper chemistry. You cannot fix cloudiness without knowing what your water chemistry actually is. Testing your water gives you specific numbers that guide your treatment decisions. Most pool owners should test their water at least two to three times per week during swimming season, and daily if they are dealing with a cloudiness problem.

Get Your Free Shopping Guides →

The main things to test are chlorine level, pH, alkalinity, and calcium hardness. Chlorine (measured in parts per million, or ppm) should stay between 1 and 3 ppm for residential pools. pH measures how acidic or basic the water is and should be between 7.2 and 7.6. Total alkalinity acts as a buffer for pH and should be between 80 and 120 ppm. Calcium hardness should be between 200 and 400 ppm—if it is higher, it can cause cloudiness and scaling.

You have two main options for testing: test strips and liquid test kits. Test strips are quick and inexpensive. You dip a strip in the water, wait a few seconds, and compare the colors to a chart. A basic kit costs around $10 to $20 and lasts for many tests. Liquid test kits are more accurate but take longer and cost more (typically $20 to $35). They involve adding chemical reagents to a water sample and watching for color changes. For serious cloudiness problems, a liquid test kit gives more reliable results.

Some pool stores offer free water testing. You bring a sample of your pool water, and their technician tests it on professional equipment. This is highly accurate and takes the guesswork out of diagnosis. Many stores do this at no cost, hoping you will purchase treatment chemicals from them.

Practical Takeaway: Start with a liquid test kit or visit your local pool store for a free test. Write down the exact numbers for chlorine, pH, alkalinity, and calcium hardness. Keep these numbers—you will use them to determine what chemicals to add.

Checking and Cleaning Your Pool Filter

A clogged or malfunctioning filter is often the reason cloudy water does not clear on its own. Your filter is the main tool for removing suspended particles from the water. When a filter gets dirty, it cannot trap as many particles, and cloudiness persists no matter what chemicals you add. Learning to inspect and clean your filter can solve many cloudiness issues without additional chemical treatment.

Learn About Atmos Loyalty Rewards Program →

There are three common types of residential pool filters: sand filters, cartridge filters, and diatomaceous earth (DE) filters. Sand filters use layers of sand to trap particles. You clean a sand filter by "backwashing"—reversing the water flow to push dirt out of the tank and into a drain. Most sand filters need backwashing when the pressure gauge reads 8 to 10 psi higher than the clean pressure baseline. Cartridge filters contain pleated fabric cartridges that trap particles. You clean them by removing the cartridge and spraying it with a garden hose to remove debris. DE filters use a powder-like substance to coat filter grids and catch very small particles. They also get backwashed like sand filters.

To backwash a sand filter, turn off the pump, move the multiport valve to "backwash," turn the pump back on, and let it run until the sight glass (a clear tube on the filter tank) shows clear water—usually 2 to 5 minutes. Then turn off the pump, move the valve to "rinse," run for 20 to 30 seconds, and finally move the valve back to "filter." For cartridge filters, turn off the pump, remove the top of the filter tank, lift out the cartridge, spray it from top to bottom with a hose, and replace it.

A filter in good working order dramatically improves your ability to clear cloudy water. After cleaning your filter, run your pump continuously for 24 hours while treating the water chemistry. This gives the filter maximum time to work through the cloudy water.

Practical Takeaway: Check your filter pressure gauge today. If it reads higher than normal, backwash or clean your filter immediately. Then run your pump without stopping for a full day while you treat chemicals.

Balancing Chlorine and Other Chemicals

Low chlorine is the most common cause of cloudy pool water. Chlorine kills bacteria and algae that make water cloudy. If your test shows chlorine is below 1 ppm, you need to add chlorine immediately. The amount you add depends on your pool size and how far below the ideal level your chlorine is.

Free Guide to Mission Lane Pre-Approval Basics →

For a typical residential pool, you can calculate how much chlorine to add using a simple formula. Find your pool volume in gallons (length times width times average depth, times 7.5). Then multiply 0.0001 times your pool volume times the number of ppm you want to raise the chlorine. For example, a 15,000-gallon pool that needs to raise chlorine by 2 ppm would need 15,000 times 0.0001 times 2, which equals 3 pounds of chlorine.

Chlorine comes in several forms: liquid chlorine (sodium hypochlorite), solid chlorine (calcium hypochlorite or trichlor tablets), and powdered chlorine (dichlor). Liquid chlorine works fastest and is least expensive. Solid tablets dissolve slowly and keep chlorine levels steady over time. Powdered chlorine dissolves quickly and is often used for shocking. For cloudy water that needs fast treatment, liquid or powdered chlorine works better than tablets.

Beyond chlorine, check your pH and alkalinity. High pH (above 7.6) actually reduces how well chlorine works. If your pH is high, add a pH decreaser (sodium bisulfate) according to package directions. Low alkalinity (below 80 ppm) makes pH unstable, so you may need to add alkalinity increaser (sodium bicarbonate) first. Always adjust alkalinity before pH when both need fixing.

Calcium hardness takes longer to fix. If your test shows hardness above 400 ppm, you have two options: partially drain and refill your pool with fresh water, or use a chemical sequestrant that prevents minerals from causing cloudiness. Many pool owners simply drain 25 percent of the pool water and refill it when hardness gets too high.

Practical Takeaway: Add chlorine today based on your test results. Wait 8 hours, then retest chlorine. It should be between 1 and 3 ppm. If it is still low, add more. Once chlorine is correct, measure pH and correct it if needed. Chemistry fixes are the fastest way to clear clou