Your AirPods spend a lot of time in your ears. Every day, they collect earwax, dead skin cells, sweat, and dust. Over time, this buildup doesn't just look gross—it actually affects how your AirPods perform. The speaker meshes can get clogged, making the sound quieter or muffled. The charging contacts on both the buds and case can develop a thin layer of oxidation that prevents proper power transfer, causing charging issues or complete failure to power on.
Learn About Paying Your FGUA Bill Online →
Apple doesn't publish exact figures on how often users should clean their AirPods, but owner forums and repair technicians consistently report that people who clean their AirPods monthly experience significantly fewer audio and charging problems. Some people only notice they need cleaning when one bud suddenly sounds drastically different from the other, or when their AirPods won't hold a charge anymore. By that point, you're already dealing with a problem that could have been prevented.
The charging case deserves attention too. The metal charging contacts inside the case—the small gold or copper-colored dots where your AirPods rest—are particularly vulnerable to corrosion. If your AirPods aren't charging even when the case has battery, dirty contacts are often the culprit. The case also accumulates lint and dust in its crevices, which can eventually work their way into the charging mechanism or rub off onto your AirPods.
The good news is that cleaning AirPods takes just a few minutes and requires only materials you probably already have at home. The key is using the right technique so you don't damage the delicate components inside.
Takeaway: Regular cleaning prevents audio quality loss and charging failures. Most people benefit from cleaning their AirPods once every two to four weeks, depending on how much they use them and how much they sweat during workouts.
Cleaning AirPods isn't complicated, but using the wrong materials can actually cause damage. Here's exactly what works and what to avoid. The most important tool is a soft, lint-free cloth. Microfiber cloths (the kind used for glasses or screens) work perfectly. Paper towels won't work because they're too rough and leave fibers behind. Regular cloth napkins or cotton towels also tend to shed lint that gets stuck in the speaker meshes.
Free Guide to Pay by Plate Illinois Billing →
You'll also want isopropyl alcohol, preferably 70% concentration. This is the same thing hospitals and clinics use to disinfect equipment. It evaporates quickly, which matters because you don't want liquid sitting inside your AirPods for long. Regular rubbing alcohol from a drugstore works fine. Avoid using water alone—while a tiny bit of moisture won't destroy your AirPods, water takes much longer to dry and can corrode the internal electronics if it sits too long. Never use soap, cleaning sprays, bleach, or any harsh chemicals.
For detailed cleaning in small spaces, cotton swabs (Q-tips) are useful, but here's the catch: they shed cotton fibers. You can minimize this by using newer swabs that are more tightly wound, or by very gently rolling the swab between your fingers before using it to compress the fibers. Some people prefer using a wooden toothpick wrapped in a tiny amount of cloth, which gives you control without fiber shedding.
Optional but helpful items include a dry cleaning brush with soft bristles (the kind sometimes included with eyeglasses), a magnifying glass if your vision needs help, and a small bowl of uncooked rice or silica gel packets if you accidentally get your AirPods wet and need to dry them out quickly. Never use a hair dryer or heat source on AirPods—heat can damage the battery and internal components.
Takeaway: Gather these items before you start: microfiber cloth, 70% isopropyl alcohol, cotton swabs or wooden toothpicks, and optional items like a soft brush. Keep this kit somewhere accessible so you're more likely to clean your AirPods regularly.
The speaker mesh is the small grille at the bottom of each AirPod where sound comes out. This is the part that gets blocked first when earwax and debris build up. When it's clogged, your music sounds distant or muffled, and bass frequencies disappear first because they're harder for sound waves to push through the blockage.
Free Guide to Mold Removal Methods for Walls →
Start by inspecting the speaker mesh with good lighting. Hold the AirPod up to a lamp and look at it from different angles. You might see a thin yellowish or brownish layer—that's earwax and skin cells. In some cases, you'll see visible lint or dust.
For light buildup, start dry. Use a soft, dry microfiber cloth and very gently wipe the mesh in a circular motion. Don't press hard. The idea is to brush away debris, not to scrub. If the cloth isn't working, move to the next step.
For heavier buildup, dampen a corner of your microfiber cloth with isopropyl alcohol—dampen, not soaked. A tiny drop goes a long way. Gently rub the speaker mesh with the damp cloth. You should see discoloration on the cloth as the earwax transfers. Repeat with fresh cloth corners until you stop seeing dirt transfer. Then use a dry cloth to wipe away any remaining moisture.
For stubborn buildup inside the speaker opening or in the microphone opening (the small hole near the top of the AirPod), use a cotton swab barely dampened with isopropyl alcohol. Roll it gently around the opening. The key word is "gently"—aggressive scrubbing can push debris deeper into the earbud or damage the delicate internal speaker components you can't see.
Some people use a toothpick very carefully to dislodge earwax that's stuck in the speaker mesh, but this carries risk if you press too hard. If you try this method, use the toothpick only to gently lift debris up and out—never push downward into the speaker. After using a toothpick, always follow up with a cloth and alcohol to clean away what you've loosened.
Takeaway: The speaker mesh clogs first and affects sound quality fastest. Use dry cloth first, then alcohol-dampened cloth for buildup. Never scrub aggressively or push debris deeper—gentle, circular motions work better and won't damage internal components.
The charging contacts are the most critical part to keep clean because without them, your AirPods won't charge at all. On AirPods (all current models), there are two small metal contact points on the bottom of each earbud. These should be shiny gold or copper-colored. If they look dull, dark, or have a black or green tint, that's oxidation or corrosion from moisture and debris exposure.
How to Delete Your Fitbit Account Guide →
Interestingly, many people never check these contacts, so they don't realize they're dirty. A common scenario: someone's AirPod won't charge, they assume the battery is dead, and they buy new AirPods. But often, a five-minute cleaning would have fixed it.
To clean the contacts on the AirPods themselves, dip a cotton swab in isopropyl alcohol and gently rub each contact point. You should see visible improvement within a few swipes. For stubborn oxidation, you can let the alcohol sit on the contact for 10-15 seconds, then swab again. Finish by wiping with a dry cloth. Don't use excessive alcohol—you want it dampened, not dripping.
The charging case has contacts too. Look inside the case where the AirPods rest. You'll see two small metal dots on the left side (for the left AirPod) and two on the right side (for the right AirPod). These get dirty more frequently than people expect because the case stays in pockets with lint, keys, and other debris.
To clean case contacts, use an alcohol-dampened cotton swab and rub each contact point thoroughly. You can apply slightly more pressure here than on the AirPods themselves because the case contacts are more robust. Swab in circular motions
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.