Synthetic wigs look remarkably like human hair—and they can feel like it too—but they're made from acrylic or polyester fibers that behave very differently when it comes to cleaning. The fibers in a synthetic wig don't produce natural oils the way your scalp does, which means they rely entirely on the products and techniques you use to stay soft, shiny, and wearable. This is actually good news: synthetic wigs typically need less frequent washing than human hair wigs. Most people can go 5 to 7 wears between cleanings, depending on how much you perspire and what environments you wear the wig in.
Learn About Paying Your FGUA Bill Online →
What makes synthetic wigs tricky is their sensitivity to heat and certain chemicals. The acrylic fibers will permanently frizz, melt, or lose their shape if exposed to hot water or high temperatures. Similarly, many everyday shampoos and conditioners designed for human hair can actually leave a waxy buildup on synthetic fibers that makes the wig look dull and matted. This buildup happens because human hair products are formulated to seal the hair cuticle, but synthetic fibers don't have cuticles in the same way—they just get coated.
Understanding these differences before you start cleaning means you'll avoid costly mistakes. A synthetic wig costs anywhere from $20 to $150 depending on the quality and style, and proper maintenance can extend its life from one or two years to three or more. Think of synthetic wig cleaning less as "washing" and more as "refreshing the fibers" with specific products and lukewarm water. Once you understand why each step matters, the process becomes straightforward and repeatable.
Practical takeaway: Grab a synthetic-specific shampoo and conditioner before your first wash. These products cost about the same as regular shampoo but are worth the investment because they won't leave buildup that dulls the wig's appearance over time.
Before you touch water to your wig, collect everything you'll need in one place. The most important items are: synthetic-specific shampoo and conditioner, lukewarm water (ideally in a sink or basin rather than a shower), a wide-tooth comb or wig brush, two clean towels, and a wig stand or a clean, dry surface where the wig can air dry. Many people use a plastic wig head mounted on a stand—these cost $10 to $25 and actually save money over time because they let you dry and style the wig without damage.
Free Guide to Pay by Plate Illinois Billing →
Water temperature is critical. Your water should feel warm to your wrist but not hot—imagine the temperature of a lukewarm bath. If the water is too hot, even briefly, the synthetic fibers can warp permanently. You can test the temperature by filling your basin first, then adding your shampoo, rather than running water directly from the tap onto the wig. This method also prevents water pressure from tangling the fibers.
Your workspace should be near a sink or counter where you can keep water from splashing onto floors. Lay down one towel as a base, and keep the second towel nearby for drying. If you don't have a wig stand, you can create a makeshift one by draping the wig over a clean rolled-up towel or a cereal box—anything that holds the wig's shape while it dries and doesn't create pressure points that might crease the fibers. Some people use a pool noodle cut in half and covered with a clean cloth; the curved surface mimics a head shape.
Having your comb ready before you start is also important. Use a wide-tooth comb or a wig brush specifically designed for synthetic fibers—regular hairbrushes can snag and pull at synthetic fibers in ways that damage them. A quality wig brush costs around $8 to $15 and makes detangling much faster.
Practical takeaway: Keep your synthetic wig supplies in a dedicated plastic bin or bag. When you store them together, you'll be more likely to actually clean your wig regularly because everything's organized and ready. This also keeps shampoo from getting lost in your bathroom cabinet.
The moment you take a synthetic wig off your head, start the detangling process. Never skip this step or do it while the wig is wet. Synthetic fibers mat and tangle more easily than human hair, and once wet, those tangles become nearly impossible to remove without damage. Gently work through the wig section by section, starting at the ends and working upward toward the roots. Use a light touch—you're gliding the comb through, not pulling or yanking.
Free Guide to Mold Removal Methods for Walls →
Pay special attention to areas that typically tangle: around the perimeter of the wig where it touches your neck and shoulders, the underside near the nape, and anywhere the wig rested against your ears or forehead. These spots experience the most friction during wear. If you encounter a stubborn tangle, use your fingers to gently loosen it first, then comb through. Many people make the mistake of trying to force a comb through a mat, which stretches fibers and creates permanent thinning in that spot.
Once the wig is fully combed and tangle-free, give it a gentle shake over the sink or a trash can to remove dust and loose debris. You might be surprised how much dust accumulates in a wig between wears—this is especially noticeable if you wore the wig outdoors or in a dusty environment. Removing this debris before washing means your shampoo can actually clean the fibers rather than moving dirt around.
For wigs with styled curls or waves, be extra cautious during detangling. Some synthetic wigs are heat-set into specific curl patterns, and aggressive combing can flatten or distort those curls. If your wig has tight curls, use your fingers to gently separate them before using the comb. You might need 10 to 15 minutes for full detangling on a longer, curlier wig, but this investment prevents having to replace your wig in six months.
Practical takeaway: Schedule detangling as a separate step the night before you plan to wash your wig. This way, you're less rushed, and the wig dries completely before getting wet, which prevents the fibers from being in a weakened state going into the wash.
Fill your basin with lukewarm water—about 2 to 3 gallons is enough for most wig styles. Add the recommended amount of synthetic-specific shampoo according to the bottle's instructions, usually about a tablespoon for a standard shoulder-length wig. Swish the water gently with your hand to distribute the shampoo evenly. You want the water to turn slightly cloudy, not sudsy like a bubble bath. If you have too much shampoo, the residue becomes harder to rinse out completely.
How to Delete Your Fitbit Account Guide →
Submerge the wig completely and let it sit for 2 to 3 minutes without agitation. This soaking period allows the shampoo to loosen dirt and product buildup from previous styling or environmental exposure. Resist the urge to scrub or rub the wig like you would wash your own hair. The aggressive motion that works on your scalp can cause matting and damage to synthetic fibers. After the soak, gently swish the wig through the water by holding it at the hairline and moving it side to side for about 10 to 15 seconds.
Drain the basin and refill it with fresh, lukewarm water for the first rinse. Submerge the wig again and repeat the gentle swishing motion. You may need to drain and refill 2 to 3 times until the water runs completely clear. This is not optional—leftover shampoo residue is one of the main reasons synthetic wigs look dull and feel sticky after washing. Some people pour lukewarm water slowly over the wig while it's in the basin, letting the water cascade through rather than stirring it, which prevents tangling.
Throughout this entire process, handle the wig gently and keep the fibers pointing downward in the same direction. Imagine you're handling delicate fabric rather than hair. One common mistake is pulling the wig upward out of the water, which causes
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.