How to Clean and Care for Granite Countertops

Understanding Granite as a Natural Stone Material

Granite is an igneous rock formed deep within the Earth over millions of years. It consists primarily of quartz, feldspar, and mica crystals that combine to create its distinctive speckled appearance. Each slab of granite is unique because the mineral composition and crystal structure vary depending on where it was quarried. This natural variation means your countertop has one-of-a-kind patterns that cannot be perfectly replicated.

Free Guide to Organizing Your Small Pantry →

The density of granite makes it one of the hardest natural stones available for kitchen and bathroom surfaces. On the Mohs hardness scale, which rates minerals from 1 to 10, granite scores between 6 and 7. For comparison, a diamond scores 10, and quartz scores 7. This hardness means granite resists scratching from normal kitchen activities better than many other countertop materials, though it is not scratch-proof.

Despite its strength, granite is a porous material. The stone contains microscopic pits and fissures that can absorb liquids if left unprotected. This porosity is why granite countertops require sealing—a protective barrier that fills these tiny spaces and prevents moisture and stains from penetrating the stone. Understanding this characteristic is fundamental to proper maintenance.

Granite also has natural variations in color and pattern. Some granite contains larger crystals that create bold visual interest, while other varieties have fine, consistent speckling. Common granite colors include black, white, gray, red, brown, and green. The specific mineral content determines the color—for example, pink granite contains feldspar, while dark granite typically has more iron content.

Practical Takeaway: Recognize that your granite countertop is a natural material requiring protection through sealing. Knowing that granite is porous but hard helps you understand why certain cleaning and maintenance practices matter for long-term durability.

Essential Cleaning Methods for Daily Maintenance

Daily cleaning keeps granite countertops looking their best and prevents the buildup of dirt and bacteria. The most effective daily cleaning method uses warm water and a few drops of dish soap. Mix these together in a spray bottle or bowl, spray or wipe the surface, and then rinse thoroughly with clean water. This approach removes surface debris and food particles without damaging the stone or its sealant.

Learn About Changing Your Texas Driver License Address →

After rinsing with soapy water, dry the countertop with a clean microfiber cloth or soft cotton towel. This step is important because water left sitting on granite can leave mineral deposits or water spots, particularly if your home has hard water. Drying also prevents moisture from sitting in any small cracks or seams where the stone was cut and joined.

For stubborn spots or dried-on spills, let the warm soapy water sit on the area for a few minutes before wiping. This allows the soap to break down the stuck-on material. Use a soft cloth or sponge to gently scrub, never a rough or abrasive material. Avoid using steel wool, scouring pads, or stiff brushes, as these can scratch the polished surface of the granite.

Certain cleaners should never touch granite. Avoid acidic cleaners like vinegar, lemon juice, and window cleaner containing ammonia. These substances eat away at the sealant and can etch the stone itself, creating dull spots or discoloration. Similarly, avoid bleach and other harsh chemicals that can damage both the granite and the sealant. Store-bought granite cleaners specifically formulated for stone are available if you prefer not to use the basic soap-and-water method.

Spills need prompt attention. When liquids like wine, juice, oil, or vinegar splash on granite, wipe them up immediately. The longer a liquid sits, the greater the chance it will seep into the porous stone and cause a stain. Acidic spills particularly need quick removal because they can damage the sealant while sitting.

Practical Takeaway: Establish a simple daily routine: spray with warm soapy water, wipe, rinse, and dry. This five-minute process prevents most staining and keeps the countertop hygienic and attractive without requiring special products or techniques.

Sealing and Resealing Granite Countertops

Sealing is the most critical maintenance task for granite countertops. The sealant forms a protective layer that fills the microscopic pores in the stone, preventing liquids and oils from penetrating and causing permanent stains. Most granite countertops are sealed at the fabrication facility before installation, but this sealant gradually wears away with use and needs periodic reapplication.

Learn About Autopay Setup Options →

To determine whether your granite needs resealing, perform the water test. Pour a small amount of water onto an inconspicuous area of the countertop. If the water beads up and sits on the surface, the sealant is still working. If the water soaks in and darkens the stone, resealing is necessary. Typically, granite countertops need resealing every one to three years, depending on usage and the quality of the original sealant.

Before resealing, clean the entire countertop thoroughly with warm soapy water and let it dry completely. Any dirt or residue will be sealed under the new sealant, so cleanliness is essential. Allow at least four hours of drying time before applying the new sealant—overnight drying is even better.

Granite sealers come in two main types: penetrating sealers and surface sealers. Penetrating sealers soak into the stone and are considered more effective because they seal from within the pores. Surface sealers sit on top of the stone and create a visible protective coating. Both types are available in liquid form that you apply with a cloth or sponge, following the product's specific instructions. Most sealers require two thin coats rather than one thick coat.

Application involves working in small sections, roughly two to three feet at a time. Pour a small amount of sealer onto a cloth and rub it onto the granite in circular motions, ensuring even coverage. Let the sealer penetrate for the time specified on the product label—usually 15 to 30 minutes. Wipe away excess sealer with a clean cloth. Apply a second coat after the first has dried, typically 4 to 24 hours later depending on the product.

During the curing period—usually 48 to 72 hours after the final coat—avoid using the countertop. Water can cloud the sealant, and spills can leave marks. Some sealers require buffing with a clean cloth once they are fully cured to bring back the shine.

Practical Takeaway: Test your countertop's sealant status with the water test once per year. Plan to reseal when water no longer beads up, typically every one to three years depending on your countertop's usage and traffic.

Protecting Granite from Common Damage and Stains

Even with a sealant, granite can stain if certain substances sit on the surface for extended periods. Oils from cooking, cosmetics, or skin can leave greasy stains that appear as dark patches. Acidic substances like wine, citrus juice, and vinegar can etch the surface, creating a dull spot even if they do not permanently discolor the stone. Dark-colored beverages and foods with strong pigments—like beets, berries, or coffee—can leave lasting marks if not cleaned promptly.

Get Your Free Rural King Account Online Guide →

Prevention is the most effective strategy. Use cutting boards to prevent direct contact between foods and the stone surface. This protects both the granite and the sealant from damage. Place coasters under glasses and cups to prevent water rings from forming. Use trivets or hot pads under pots and pans, not because granite is damaged by heat but because sudden temperature changes can cause the stone to crack. Keep bottles and containers off the countertop when possible, storing them in cabinets instead.

For oily or greasy stains, create a poultice—a paste that draws out stains from within the stone. Mix baking soda with water to form a thick paste the consistency of peanut butter. Spread this mixture over the stain and cover it with plastic wrap. Let the poultice sit for 24 to 48 hours as it dries. As it dries, the baking soda pulls the stain out of the porous stone. Once completely dry, remove the po