License plate screws might seem like a minor detail, but they're actually critical to vehicle safety and legal compliance. These small fasteners hold your license plate securely to your vehicle's bumper or mounting bracket, and choosing the wrong ones can lead to a loose or falling plate—which creates safety hazards and can result in traffic citations in most states.
Learn About Paying Your FGUA Bill Online →
The basic function of license plate screws is straightforward: they keep your plate in a fixed, visible position so law enforcement and automated systems can read your registration information. However, the specifications matter more than many people realize. License plate screws must be able to withstand vibration from driving, temperature fluctuations, road salt, and UV exposure. A screw that corrodes or loosens will fail at its job, potentially causing your plate to dangle or detach while you're driving.
Most states require license plates to be securely fastened and clearly visible. Some jurisdictions have specific regulations about screw specifications, including material type and size. For example, some states mandate corrosion-resistant fasteners, while others have rules about whether you can use tamper-resistant screws. Before purchasing any license plate screws, it's worth checking your state's Department of Motor Vehicles website or your local regulations to understand what's legally permitted in your area.
License plate screws typically come in a few standard sizes, with the most common being #8-32 (the diameter and thread pitch). However, some vehicles and mounting systems may require different sizes. The takeaway here: don't assume all license plate screws are interchangeable. Understanding the basic specifications your vehicle needs is the first step in choosing the right ones.
The material of your license plate screws directly affects how long they'll last and how well they'll perform in various climates. This is where many people make their first mistake—grabbing whatever screws are cheapest without considering the environment they'll face.
Free Guide to Pay by Plate Illinois Billing →
Stainless steel is the gold standard for license plate screws, particularly in coastal areas or regions where road salt is used during winter. Stainless steel resists rust and corrosion far better than other common materials. It won't degrade when exposed to salt spray, moisture, or harsh weather conditions. If you live near the ocean or in a state that salts roads heavily, stainless steel is worth the slightly higher cost. A stainless steel #8-32 screw typically costs between $0.15 and $0.50 per unit, depending on the brand and whether you're buying in bulk.
Zinc-plated screws are a middle-ground option. They're more affordable than stainless steel (usually $0.05 to $0.20 per unit) and offer decent corrosion resistance for moderate climates. However, zinc plating will eventually wear away with exposure to salt and moisture. In dry climates like Arizona or New Mexico, zinc-plated screws often perform adequately. In coastal states or heavy-salt regions, they're likely to corrode within two to three years.
Some people use galvanized screws, which have a thicker coating than standard zinc-plating. These are moderately corrosion-resistant and fall between zinc-plated and stainless steel in terms of price ($0.10 to $0.30 per unit). Brass screws are another option for aesthetic reasons (some people prefer their appearance), but they're softer than steel and more prone to stripping. They're not typically recommended for license plate fastening unless you're in a very dry climate.
Your practical takeaway: assess your climate and road maintenance practices. Coastal residents and those in areas where roads are salted should invest in stainless steel. Everyone else can likely use zinc-plated or galvanized screws. Factor in replacement frequency when deciding—stainless steel costs more upfront but may last 5+ years versus 2-3 years for zinc-plated.
License plate screws come in different sizes, and using the wrong size is one of the most common mistakes people make when replacing fasteners. The most widely used size in North America is #8-32, which refers to the diameter (roughly 5/32 of an inch) and the thread pitch (32 threads per inch). However, some vehicles and mounting brackets require different specifications.
Free Guide to Mold Removal Methods for Walls →
Before you purchase replacement screws, you need to know what size your vehicle requires. The easiest way to determine this is to remove one of your existing screws and measure it, or compare it to a standard at your local hardware store. If you're buying for a new vehicle and don't have an existing screw to reference, check your owner's manual or contact your vehicle manufacturer's parts department. They can tell you the exact specifications your model requires.
Some vehicles use #8-32 screws (the standard), while others may use #10-24 (slightly larger diameter, 24 threads per inch) or smaller sizes like #6-32. Specialty vehicles—especially some European imports or luxury brands—occasionally use metric specifications like M5 or M6. Using a screw that's too large can damage your license plate's mounting holes or the bumper bracket. Using one that's too small won't hold securely and will likely spin out over time.
Thread pitch matters because it affects how tightly the screw fastens. A coarser pitch (fewer threads per inch) engages faster but may not hold as securely under vibration. A finer pitch (more threads per inch) grips more gradually but provides a more stable hold. For license plates, the standard pitches have been selected to work well in the mounting brackets used across most vehicles, so matching the original specification is important.
Length is another consideration. Most license plate screws are relatively short—typically ranging from 1/2 inch to 3/4 inch in length. Using screws that are too long can puncture through the bracket and damage paint or plastic components behind the plate. Too-short screws won't engage enough threads to hold securely. Your practical takeaway: measure or identify one existing screw before ordering replacements. This single step prevents nearly all installation problems.
Some jurisdictions now require or recommend tamper-resistant license plate screws, which use specially designed heads that can't be removed with standard tools. These screws are designed to prevent unauthorized removal of license plates—a concern in areas with high rates of plate theft or fraud. Before choosing security screws, confirm whether your state or locality requires them.
How to Delete Your Fitbit Account Guide →
The most common tamper-resistant design is the anti-theft or one-way screw, which has a head that allows tightening with a standard Phillips or flat-head driver but prevents removal. To take these out, you typically need a special removal tool that only law enforcement or authorized technicians possess. Some designs use an unusual head shape (like a star or triangle) that requires a matching driver bit. Others use a one-way spiral design where the head strips if you try to reverse it.
Another option is the captive screw, which has a larger head or washer permanently attached. This design prevents complete removal—the screw stays loosely connected to the plate or bracket. Captive screws are particularly useful in high-vibration areas or on vehicles prone to vibration loosening.
When shopping for security screws, you'll find several manufacturers specializing in these products. One common brand is Security Fasteners, which offers various anti-theft designs. Another option is sourcing through automotive parts suppliers like O'Reilly Auto, AutoZone, or NAPA, which increasingly stock tamper-resistant options. Security screws typically cost $0.50 to $1.50 per unit—significantly more than standard fasteners, but often required by law in certain areas.
There's a trade-off to consider: if you ever need to remove your license plate for maintenance or replacement, tamper-resistant screws make the process slower. You'll need the removal tool, and if you've lost it, you may need to contact local authorities or a dealer. Your practical takeaway: check your local DMV or vehicle code online to see if tamper-resistant screws are required in your area. If they're not required but optional, weigh the security benefit against the inconvenience of removal.
Your geographic location is one of the most important
Learn How to Grow Sweet Corn at Home →
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.