Garmin watches are designed to keep accurate time automatically in most situations. They sync with GPS satellites when you're outdoors, and many models connect to your phone via Bluetooth to pull the correct time from your smartphone. However, there are several reasons why your Garmin might display the wrong time.
Learn About Paying Your FGUA Bill Online →
The most common culprit is a time zone mismatch. If you travel across regions or your watch settings don't reflect where you actually are, the display will show incorrect time. Another frequent issue happens when your Garmin hasn't connected to GPS or your phone for an extended period. Without these connections, the watch relies on its internal clock, which—like all electronic clocks—can drift slightly over time. Even a difference of a few minutes can accumulate over weeks of disconnected use.
Daylight saving time transitions also cause confusion. Some Garmin models update automatically when connected to your phone, while others require manual adjustment. Battery-related issues can occasionally affect timekeeping too, particularly if your watch was completely drained and then recharged after sitting unused for months.
Garmin watches with multiple sports modes or specific training functions sometimes display time differently depending on which mode is active. For example, a watch in multisport mode might show elapsed time rather than clock time. Understanding which situation applies to your situation helps determine whether you need a quick settings adjustment or a deeper troubleshooting step.
Practical takeaway: Before changing time settings, identify whether the issue is a time zone problem, a sync problem, or a mode-specific display issue. This narrows down which solution will actually fix your particular situation.
The pathway to time settings varies depending on your specific Garmin model. Fenix series watches, Forerunner models, and basic fitness trackers all navigate slightly differently, but the general principle remains consistent: you're looking for the settings menu, then a time or system submenu.
Free Guide to Pay by Plate Illinois Billing →
On most Garmin sports watches, start by pressing the Menu button—typically located on the left side of the watch face. This opens your main menu. From there, look for "Settings" or "System Settings." Some watches label this as "Preferences." Once you're in Settings, scroll through the options until you find "Time," "Date & Time," or occasionally "System" (which contains time settings nested within it).
For Garmin watches that sync with your phone through the Garmin Connect app, you have two potential access routes. You can adjust time directly on the watch itself through the physical menu, or you can modify settings through the mobile app on your phone. The app route is often faster if you're adjusting time zone after travel, because you simply update your phone's location settings and let the watch sync automatically.
Garmin's touchscreen models, like some newer Epix watches, use a slightly different navigation method. Instead of physical buttons, you swipe to access menus. Press the up arrow or swipe upward from the watch face, then navigate to Settings using the touch interface. The menus work the same way once you're inside the settings area.
If you can't locate the Time settings within three menu levels, your watch model may handle this differently. Some basic Garmin fitness trackers don't allow manual time adjustment at all—they rely exclusively on phone sync or GPS sync. Checking your specific model's documentation tells you whether manual adjustment is even an option for your device.
Practical takeaway: Locate your Settings menu first, then hunt for Time or Date & Time options. If you're struggling, the Garmin Connect app often provides a more intuitive pathway to adjust the time, especially if phone sync is available for your model.
Once you've reached your time settings, the actual adjustment process is straightforward, though the exact button sequence differs slightly between Garmin models. Here's how the process typically unfolds on watches with physical button navigation.
Free Guide to Mold Removal Methods for Walls →
After selecting "Time" or "Date & Time" from your Settings menu, your watch displays the current time in hours and minutes (sometimes seconds, depending on the model). You'll see a specific field highlighted—often the hour value. This is your active field for editing. Use the up and down buttons (or menu and back buttons, depending on your watch) to increment or decrement the hour value. For a 12-hour format watch, the numbers cycle from 1 through 12 and back to 1. For 24-hour format, they cycle from 0 through 23.
After you've set the correct hour, you'll need to move to the minutes field. Press the button designated for "next" or "forward"—typically located on the right side of the watch. This shifts the highlight to the minutes digits. Adjust these using the same up and down buttons. Minutes typically increment in steps of 1 or 5, depending on your model (some watches jump by five-minute intervals to speed up adjustment, while others allow single-minute changes).
Some Garmin watches include seconds adjustment as well. If you see a third field highlighted after minutes, use the same process to adjust seconds, then move forward again. Once all values are correct, look for a confirmation button—often labeled "OK," "Done," or represented by a checkmark icon. Press this to save your changes.
The time update takes effect immediately. Your watch face will display the newly set time within seconds. If your watch is set to sync with your phone or GPS, note that the next time it connects to either source, it may override your manual setting and revert to the network time. This isn't an error—it's your watch reasserting what it considers the authoritative time source.
Practical takeaway: Move through hour → minute → (second, if available) fields, adjust each with up/down buttons, and confirm with OK or Done. The entire process usually takes under a minute once you're in the time settings menu.
Adjusting time zone is different from adjusting the actual time, and understanding this distinction prevents confusion. Time zone changes affect how your watch displays time but don't alter your workout history or training data. A run you completed at 7 AM remains linked to that activity, regardless of whether your watch was showing 7 AM in your local zone or a different zone.
How to Delete Your Fitbit Account Guide →
Most modern Garmin watches handle time zone changes automatically when connected to your phone, especially if you've enabled location services in the Garmin Connect app. When you travel across regions, the app detects your phone's new location and updates your watch's time zone setting on the next sync. This is the most straightforward method and requires no manual intervention beyond allowing the app permission to access location data.
If you prefer manual control or your watch doesn't sync with your phone, you'll need to access the time settings as described in the previous section and look specifically for a "Time Zone" field, distinct from the time itself. This field typically displays an offset from GMT (Greenwich Mean Time) or UTC. For example, Eastern Standard Time shows as UTC-5, while Pacific Time shows as UTC-8. Scroll through the available zones until you find the one corresponding to your current location, then confirm your selection.
The adjustment is instantaneous. If your watch was displaying 2:00 PM when set to Pacific Time and you change the zone to Eastern Time, it will immediately display 5:00 PM—reflecting the three-hour difference. Your internal data logs, however, continue to reference the actual moment these activities occurred. When you review your workout history in Garmin Connect, the app can display times in your original time zone or your new time zone, depending on your preferences.
After traveling and returning to your home time zone, follow the same process in reverse. Some users prefer letting the phone sync handle this automatically, while others manually adjust to maintain control. Either approach preserves your training data without risk of loss.
Practical takeaway: Time zone changes update your watch's display but don't alter your activity history. Let your phone handle it automatically if possible, or manually select your time zone from the settings menu. Your workout data remains intact either way.
Your Garmin watch has multiple time-setting mechanisms available, and choosing the right one for your situation matters. Some methods are faster, while others offer more control. Understanding when each approach makes sense prevents frustration and redund
Learn How to Grow Sweet Corn at Home →
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.