Cornhole boards have become a staple at backyard gatherings, tailgates, and recreational events across the United States. Before you start building, understanding the standard specifications will help you create boards that work well for casual play and that match what most people expect when they sit down to play.
Learn About Paying Your FGUA Bill Online →
A regulation cornhole board measures 48 inches long and 24 inches wide, with a thickness of about three-quarters of an inch. The hole in the board sits 9 inches from the top edge and is centered left to right, with a diameter of 6 inches. These dimensions matter because they affect gameplay—a hole that's too small makes scoring difficult, while one that's too large removes the challenge altogether.
The board should sit at an angle when in use, tilted so the top (where the hole is) sits about 12 inches higher than the bottom. You'll build legs or a frame to achieve this angle. This slant is intentional: it makes bags roll toward the hole naturally and adds a skill element to the game, since players must account for the angle when tossing.
The playing distance—where people stand when they toss bags—is typically 15 feet from the front of the board, though casual players often adjust this distance based on skill level. Children might stand closer, while competitive players might toss from farther back. Knowing these measurements helps you understand why the boards are built the way they are and how to construct something that plays properly.
Practical takeaway: Write down the key measurements (48" × 24" board, 6" hole, 12" height difference) and keep them handy while building. Precision at this stage prevents frustration later.
Your material choices determine how long your cornhole boards survive weather, storage, and repeated use. Quality materials don't necessarily mean expensive ones—they mean materials that handle moisture, UV exposure, and impact well.
Free Guide to Pay by Plate Illinois Billing →
For the board surface, three-quarter-inch plywood is the standard choice for most DIY builders. Exterior-grade plywood costs more than standard plywood but resists warping and delamination when exposed to moisture. Some builders use oriented strand board (OSB), which is cheaper but more prone to swelling if it gets wet. The playing surface—the top of the board—needs to be durable enough to withstand thousands of bags landing on it. Many builders apply paint or a specialized coating to this surface to slow wear.
For the frame and legs, dimensional lumber like 2x4s or 2x6s works well. Pine is budget-friendly and readily available, while treated lumber resists rot if the boards will sit outside between uses. Hardwoods like oak cost significantly more but look finished and handle moisture differently than softwoods. Some builders use metal legs or frames, which never rot but require welding skills.
The playing surface coating deserves special attention. Outdoor deck paint provides durability and weather resistance. Some builders use truck bed liner coating, which creates a textured surface that affects how bags slide. Others use marine-grade polyurethane or spar urethane, finishes designed for water exposure that flex with wood movement. Each choice creates a slightly different playing experience: smooth surfaces make bags slide more, textured surfaces slow them down.
Hardware matters too. Use exterior-grade screws (they won't rust) and stainless steel bolts if you're assembling with bolts rather than screws. Galvanized hardware, while cheaper, can still corrode over time. For a board that will live outside year-round, these choices add up to years of additional use life.
Practical takeaway: Budget for exterior-grade plywood and exterior-rated fasteners. These cost 20-30% more than standard materials but can double or triple your board's usable lifespan.
The frame is what holds your plywood playing surface together and gives the board structural rigidity. A poorly built frame will sag, warp, or crack under the impact of bags and the stress of being moved around.
Free Guide to Mold Removal Methods for Walls →
Start by cutting your plywood to the exact dimensions: 48 inches long and 24 inches wide. Many home improvement stores offer free or low-cost cutting services, which is worth using if you don't have access to a saw. The board needs to be square—use a carpenter's square to verify that all corners are 90 degrees.
Next, build a frame underneath the plywood using 2x4 lumber. The frame should consist of a perimeter of boards around the edges, with one or two support boards running across the middle width of the board (called crossbars). Cut your 2x4s to length: two pieces at 48 inches for the long sides and two pieces at approximately 20.5 inches for the short sides (accounting for the thickness of the lumber). These form the outer rectangle. Add one crossbar running from side to side, positioned approximately in the middle.
Assemble this frame on a flat surface using exterior-grade screws—at least 2.5-inch screws driven through the long boards into the ends of the short boards. Use at least two screws per connection. This creates a rigid rectangle. If you're building a particularly heavy-duty board or expect rough handling, add a second crossbar for additional support. Some builders use half-inch plywood for internal bracing instead of 2x4s, which adds strength without as much weight.
Once the frame is solid, attach the plywood playing surface to the top of this frame using 1.5-inch exterior-grade screws spaced every 6 inches around the perimeter and every 12 inches along the crossbars. Pilot holes (small holes drilled first) prevent the wood from splitting. Countersink the screw heads slightly below the surface so they won't interfere with bags sliding across the board.
Now cut your hole. Mark the center point: 24 inches from one of the short ends (lengthwise) and 12 inches from either long side (widthwise). From this center point, measure 9 inches toward the top (tall end) of the board and mark that spot. This is where your hole center should be. Using a hole saw bit (6 inches in diameter) attached to a power drill, bore through the plywood. Work slowly to prevent splintering. If you don't have a hole saw, you can drill a small pilot hole, then use a jigsaw to cut a circle, though a hole saw produces cleaner results.
Practical takeaway: Invest in a hole saw bit—this single tool makes cutting a clean hole much easier than trying to free-hand cut it. The hole is the most visible part of your board, so precision matters here.
The legs determine how playable your board is. Getting the angle wrong makes the board frustrating to use. The board needs to be tilted so that the end with the hole is about 12 inches higher than the opposite end. This translates to a slope of roughly 10-15 degrees, depending on how steep you prefer the play.
How to Delete Your Fitbit Account Guide →
The simplest leg design uses four pieces of 2x4 lumber. For a typical setup, the legs at the bottom (the end without the hole) are about 6 inches tall, while the legs at the top (the end with the hole) are about 18 inches tall. This creates the 12-inch height difference. Cut four pieces of 2x4 to these lengths, or cut all four pieces to the same length and then notch or angle the top of two of them to create the difference.
Attach the legs to the underside of your frame using lag bolts or through-bolts with washers and lock nuts. Lag bolts screw directly into the wood, while through-bolts go all the way through and are secured with nuts on the other side—through-bolts are more secure for a board that will be moved frequently. Position the legs near the corners, with at least 2-3 inches of clearance from the actual corner to avoid interfering with bag placement.
Some builders prefer a trapezoidal leg frame—two wider pieces of lumber that form an A-frame at each end of the board. This design is heavier but very stable and looks more finished. It also allows you to adjust the angle more easily by changing the connection points.
For
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.