Squirrels are opportunistic foragers that spend most of their waking hours searching for food. In urban and suburban environments, natural food sources like acorns, nuts, and seeds become scarce during certain seasons—particularly in winter and early spring. A squirrel feeder addresses this gap by providing concentrated nutrition during months when squirrels would otherwise travel farther and expend more energy hunting for meals.
Learn About Paying Your FGUA Bill Online →
Understanding what squirrels naturally eat helps you build a feeder that actually works. Squirrels prefer high-fat, high-protein foods because these fuel their active metabolism and help them maintain body temperature. In the wild, they prioritize tree nuts like acorns, hickory nuts, and walnuts. They also eat seeds from cones, pine nuts, sunflower seeds, and pumpkin seeds. During summer months when insects are plentiful, squirrels will supplement their diet with protein from bugs and larvae. Fruits like apples and berries appear in their diet seasonally, but these rank lower in preference than nuts and seeds.
A well-designed squirrel feeder mimics these natural food preferences. Research from wildlife biology programs shows that squirrels are most attracted to feeders containing whole nuts in their shells—this satisfies their natural instinct to crack open and process food. The act of gnawing through a shell also keeps their teeth worn down to a healthy length, something squirrels desperately need since their incisors never stop growing throughout their lives.
Location matters as much as contents. Squirrels prefer feeders positioned near trees or structures that provide escape routes. They won't use a feeder placed in an open yard with no cover nearby, as exposure makes them vulnerable to predators. Practical takeaway: Before building, identify a spot within 6-12 feet of shrubs, trees, or a fence line, and plan your feeder design around foods squirrels already seek in nature.
Building a functional squirrel feeder doesn't require expensive materials or specialized woodworking skills. Most effective designs use readily available supplies from hardware stores or recycle items you likely have at home. The key is selecting materials that withstand outdoor weather while remaining safe for the squirrels you're feeding.
Free Guide to Pay by Plate Illinois Billing →
For the feeder structure itself, pressure-treated wood works well because it resists rot and insects without requiring toxic chemical finishes. Cedar and redwood are natural alternatives that age beautifully outdoors and contain natural oils that resist decay. Avoid treated plywood with adhesives, as these can splinter or degrade unpredictably. Many people use reclaimed wood from old pallets or fence sections—these work perfectly as long as they haven't been treated with pesticides or harmful preservatives.
Metal components should be stainless steel or galvanized to prevent rust. Standard hardware store screws and hinges will corrode and weaken within a season of outdoor exposure. Galvanized fasteners cost slightly more but last years longer. If you're incorporating a roof or water-resistant covering, sheet metal, polycarbonate panels, or asphalt shingles all perform well. Some builders use reclaimed materials like old license plates or corrugated plastic roofing.
The tools required are basic. A handsaw or circular saw cuts wood pieces to size. A power drill makes hole-drilling fast and consistent. A level ensures the feeder sits straight, which helps water drain properly. Sandpaper (80-grit and 120-grit varieties) smooths rough edges that could splinter. A measuring tape and pencil mark cut lines and hole locations. Most people already own these tools or can borrow them from neighbors.
For materials you might recycle: old wooden spoons become feeding platforms, PVC pipes create tube feeders, and tin cans (with smoothed edges) hold seeds. Even an old tree stump can serve as a feeder base. Practical takeaway: Before purchasing any materials, inventory what you already have at home—wood scraps, metal hardware, and tools. This approach reduces both cost and environmental impact while producing equally functional feeders.
Different feeder designs suit different feeding purposes and squirrel populations. The platform feeder is the simplest design—essentially a flat or slightly raised surface that holds seeds and nuts. This open design allows multiple squirrels to feed simultaneously and works well for offering a variety of foods. A basic platform measures roughly 12 inches by 12 inches and sits 3-5 feet high on a post. The platform should have small drainage holes drilled every 2-3 inches to prevent water pooling. Many builders add a small lip or edge (about 1 inch high) around three sides to contain food while still allowing easy squirrel access.
Free Guide to Mold Removal Methods for Walls →
The hopper feeder encloses seeds in a weatherproof box with access holes cut into the sides. Squirrels insert their head and paws through the holes to grab food, while the seed supply stays protected from rain. A typical hopper measures 8 by 8 by 12 inches tall. The roof should angle slightly to shed water, and the access holes work best at 1.5 to 2 inches in diameter. This design is more weather-resistant than platform feeders and limits waste because seeds stay contained rather than spilling across the ground.
The tube feeder uses vertical sections of PVC pipe or wooden dowels with small holes drilled along the length. Seeds pour in from the top and gravity dispenses them as squirrels nibble through the holes. Tube feeders hold large quantities of seed relative to their size and are excellent for offering tiny seeds like nyjer seed or cracked corn. A 4-inch diameter pipe, 18-24 inches tall, creates an effective tube feeder. Drainage holes at the base prevent water accumulation inside.
Each design can be mounted on a single post, hung from a tree branch, or attached to a fence. Post-mounted feeders offer easier refilling and cleaning. Hanging feeders swing slightly in wind, which some squirrels dislike, while others find the movement enjoyable. Fence-mounted designs work well in small yards where post placement is limited. Practical takeaway: Match your feeder type to your situation—use platform feeders if you want to observe multiple squirrels and don't mind daily refilling; choose hopper feeders for weather protection and less frequent maintenance; select tube feeders if you have limited vertical space or want to minimize seed waste.
This section walks through building a simple hopper feeder, which represents a middle ground between easy construction and functional performance. Start by cutting your wood pieces to size: front and back panels (8 by 12 inches), two side panels (8 by 8 inches), bottom (8 by 8 inches), and roof pieces (one 9 by 13 inches and one 9 by 10 inches to create an angled roof). Sand all pieces thoroughly, paying special attention to edges and corners where splinters form easily. This takes about 30 minutes but prevents injuries to the squirrels' paws and mouth.
How to Delete Your Fitbit Account Guide →
Next, drill the access holes. Mark points on the front and back panels, roughly 3-4 inches up from the bottom, spacing them about 2 inches apart. Use a 1.75-inch hole saw or spade bit to create four to six holes total. Drill slowly and support the back of the panel to prevent the wood from splitting as the bit exits. These holes should be smooth and even—rough edges can cut squirrel skin.
Assemble the box by joining the sides to the front and back panels using stainless steel screws (2-inch length works well). Pre-drill holes slightly smaller than your screw diameter before driving screws in; this prevents wood splitting and makes assembly easier. Attach the bottom piece, and drill drainage holes in each corner and two holes in the middle. Secure the roof pieces at an angle so one edge sits higher than the other, creating a peak that sheds water toward one side.
Attach mounting hardware to the back panel—either a bracket for post mounting or a hook for hanging. If post-mounting, your feeder typically sits 4-6 feet high. If hanging from a tree, ensure the branch is at least 1.5 inches in diameter and can safely support the weight of the full feeder plus several squirrels. Test the stability by gently pushing on the completed feeder from different angles.
Installation should take 30-45 minutes from
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.